TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

305-350 conversion questions

Thread Tools
 
Search this Thread
 
Old Jan 7, 2002 | 03:48 AM
  #1  
bingo's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Nov 2001
Posts: 920
Likes: 0
From: AL,USA
Car: 1990 Formula
Engine: 95 LT1
Transmission: T56
Axle/Gears: Weak 7.5 with 4.10s
305-350 conversion questions

I am in the process of converting my 305 TPI firebird to a 350. I am planning on using the LT4 hot cam and stock 350 heads. What upgrades should I also make? I am on a limited budget and don't need to screw up. I have an adjusable fuel pressure regulator and a 52mm throttlebody. I figure I will need a custom prom at some point, but I have to wait on that. I read that I need to use the 350 knock sensor and memcal, can I get the memcal from GM or do I have to get one from another car?Any help is appreciated.
Reply
Old Jan 7, 2002 | 12:26 PM
  #2  
Jim85IROC's Avatar
TGO Supporter
iTrader: (2)
 
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
Don't forget the bigger injectors. MEMCAL isn't so important if you burn your own PROM, or get one burned for you. The MEMCAL just holds the "limp home" information, and the 305 MEMCAL will be perfectly adequate for that.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MoJoe
Fabrication
14
Aug 19, 2017 07:12 PM
Bubbajones_ya
Electronics
4
Aug 31, 2015 12:02 PM
lt1z350
Suspension and Chassis
5
Aug 28, 2015 05:57 AM
ezobens
DIY PROM
8
Aug 19, 2015 10:29 PM
redmaroz
LTX and LSX
7
Aug 16, 2015 11:40 PM




All times are GMT -5. The time now is 03:37 AM.