Help please!!
Thread Starter
Junior Member
Joined: Feb 2019
Posts: 4
Likes: 3
Help please!!
86 iroc with tpi...
So I've finally got my car to start...again and I'm having an issue with a rich start condition I have a gm tech1 and the data stream looks pretty good but heres the kicker if I unplug the maf it starts fine and seems to idle cleaner with no change to the data stream. Has anyone seen this or have any ideas to check?
So I've finally got my car to start...again and I'm having an issue with a rich start condition I have a gm tech1 and the data stream looks pretty good but heres the kicker if I unplug the maf it starts fine and seems to idle cleaner with no change to the data stream. Has anyone seen this or have any ideas to check?
COTM Editor
Joined: Oct 2008
Posts: 1,365
Likes: 216
From: PA
Car: 91/89/85/82 Z28s, 88 TA, 88/88 SC
Engine: SBC and LS variations
Re: Help please!!
with your MAF plugged in what is the airflow reading on your tech1? if incorrect this could certainly be an issue and need to deduce is it a sensor issue or truly high airflow at idle due to vacuum leak, throttle set wrong, etc
is your TPS signal reading correctly and throttle set correctly
is your TPS signal reading correctly and throttle set correctly
Thread
Thread Starter
Forum
Replies
Last Post
irocznut
Tech / General Engine
4
May 21, 2004 11:46 AM