having problems with 460LE
Thread Starter
Junior Member
Joined: May 2002
Posts: 49
Likes: 0
From: abq, NM
having problems with 460LE
I rebuilt a 460LE and right when I start driving it starts to slip from 2nd two 3rd all the other gears are fine. I took it apart and put it togther again and it did the same thing. Anybody tried to rebuild a 460LE and have these problems.
Thanx
Thanx
Supreme Member
Joined: Feb 2001
Posts: 1,730
Likes: 0
From: Webster, N.Y.
Slips through 2nd? Let's see: Torn Teflon seal on the 2nd Servo Piston, worn out 2nd Accumulator Piston/seals, loose Accumulator Housing, warped Reverse Drum, improper pressure response, sticking Accumulator Valve in VB, VB Gasket problem, etc.
Senior Member
Joined: Aug 2002
Posts: 543
Likes: 0
From: Savannah, GA
OK, lets start this thread off on the right foot.
A: What was originally wrong w/ the tranny that prompted the "rebuild".
B: List everything that the rebuild consisted of: (i.e. replaced all clutches w/ Allomatics, replaced all seals, installed shift kit, etc...)
A: What was originally wrong w/ the tranny that prompted the "rebuild".
B: List everything that the rebuild consisted of: (i.e. replaced all clutches w/ Allomatics, replaced all seals, installed shift kit, etc...)
Thread
Thread Starter
Forum
Replies
Last Post
