Did anyone else have problems getting the bolts out of the trailing arms and panhard bar? Man mine are stuck in there. I tried saoking them in deep creep and everything. I need help gettin this thing out. Also i broke my hard brake line that goes under the car to the front. Where can i get one of these?

tried a BFH? little heat? if you aren't worried about the bushings heat them up and let the cool a bit. should free them up. if you're worried about the bushings soaking them with some r134a would have about the same effect as heat, only in reverse.

ya theyre a blast me and a bud just got mine out. we used a lot of pb blaster and wrench extensions.. if you can get them moving at all just spin them with some pb (or your fav penetrating oil) and get it worked in there real good. then the bfh works wonders getting them out

you can get another line from www.classictube.com i'm ordering my lines from them, last part of my PBR swap

as for the bolts, i had a hell of a time myself. spin them with the wrench and blast em with a hammer. they will come out eventually. use lots of P oil also, lube is your friend.

alright i got the rear out and the new one in. I would reccomend PB blaster to anyone with this broblem and a BFH also works awesome!!