Hey Everybody! I just became a member and am psyched to see all the 3rdgen guys out there!! May Chevy Live Forever!!!! :rockon:
Anyways, on to my question. I looked for a topic regarding my question around this forum and couldn't find one so forgive me if this is already posted somewhere.
I'm going to be swapping in a 350 motor from an older truck, after a custom re-build of course, (hehe) and was wondering if a T-56 would bolt right up or if it will only bolt up to certain motors such as the LS1. I haven't had a chance to look so I don't have any clue as to how close the holes are or anything and I didn't want to pick up a trans if it won't work. Any help would be greatly appreciated!!! Thanx!

 

Search for T56.

Search for T-56.

Your question has been answered here.

The nice thing is that if you search and read the stuff which doesn't directly answer your question, you'll find answers to questions you haven't asked yet.

And here is one thread I came across when using search words old 350 t56.

-matthew

https://www.thirdgen.org/techbb2/sho...ht=old+350+t56

 

Thanx, I had a feeling it had already been answered and I already tried reading about 12-15 different posts about the swap that weren't a direct answer to my question, and I did learn a lot.

 

You need a lt1 t-56.

 

Thanx for the info dankhound!