Embarassed to ask.
Thread Starter
Member

Joined: Aug 2004
Posts: 178
Likes: 0
From: Gray, GA
Car: 1986 Trans Am
Engine: 6.0L LQ4
Transmission: 4L60E
Axle/Gears: 2.73
Embarassed to ask.
I was looking at the installation instructions for a B&M Console Megashifter to fit my car and still look good. I have NO IDEA what kind of Transmission is in my car. Is it a TH-350 or am I wrong?
I know it seems like a dumb question but any help would be appreciated. Also if anyone has done this before could you tell me how easy it would be to put one in and whether it looks good in the car.
Thanks in advance guys
I know it seems like a dumb question but any help would be appreciated. Also if anyone has done this before could you tell me how easy it would be to put one in and whether it looks good in the car.
Thanks in advance guys
If it was factory equipped w/ an auto trans, it left with a TH700-R4.
On an almost 20 year old car, anything goes...could have been swapped by a previous owner.
You can ID the trans type by crawling under and looking at the pan shape.
On an almost 20 year old car, anything goes...could have been swapped by a previous owner.
You can ID the trans type by crawling under and looking at the pan shape.
Thread Starter
Member

Joined: Aug 2004
Posts: 178
Likes: 0
From: Gray, GA
Car: 1986 Trans Am
Engine: 6.0L LQ4
Transmission: 4L60E
Axle/Gears: 2.73
According to the previous owner it is completely stock and was only owned by one other person, which was the previous owners brother.
Senior Member
Joined: Dec 2003
Posts: 647
Likes: 0
From: Oklahoma
Car: 1991 Trans AM GTA
Engine: 5.7L TPI
Transmission: 700R4
Originally posted by Floor guy
Based on your sig I would say it is a 700-r4
Based on your sig I would say it is a 700-r4
Thread
Thread Starter
Forum
Replies
Last Post
yellowiroc
Tech / General Engine
13
Dec 14, 2000 09:11 AM




no no no after I found out through this post I then put that in my sig. so now it looks dumb!! 