Got the new tranny and ready to put it in...any tips/what tools will I need.

Subscribe
Oct 31, 2005 | 01:12 PM
  #1  
alright I get the new trans and im having a couple people over to help me put it in this saturday. he said it would be a big help if i had directions ready, tools ready, car in the air, etc. so are there any tips that I could use? also a complete list of tools I will need would be awesome to get me started so I dont have to keep scrambling through everything for the right size. i have the haynes manual and a gm manual for an 87 bird (i have an 86 z). if youve done this swap and noticed anything helpful that would be awesome. i hope i can pull this off.

just for the info...i got a gm goodwrench rebuilt 15k miles ago, 2400 stall (stock size, restalled by a custom shop), and a big *** trans cooler altogether for 250 and i picked it up yesterday. good deal?

thanks a lot guys.

also, the tranny is from a 90 so i know i will need a new like speedo gear or something? is there anything else i would need and any helpful info about this. thanks again.
Reply 0
Nov 2, 2005 | 08:30 PM
  #2  
nobody has any tips or anything?
Reply 0
Subscribe