SGI-5 Dakota Digital--Seems to be some questions--I have more
Thread Starter
Member
iTrader: (1)
Joined: Nov 2005
Posts: 130
Likes: 0
From: VA
Car: 1986 Z28
Engine: 305ci
Transmission: 700R4
SGI-5 Dakota Digital--Seems to be some questions--I have more
I received the SGI-5 today. I have read through most of it. I have a few questions about the installation.
1. Where is the best location for this part? I was thinking in the center console under the armrest.
2. The cutting of the wires, is that behind the speedo or under the car, or near the ECM on the pasenger side.
I am familiar with my car, I just need a starting point. How can I tell the wires that are under the dash or in the center console? I do not want to cut the wrong wires.
I know to twist the wires and I am going to use a good wire with good shielding.
The car is a 1992 Chevrolet Camaro RS - Automatic - Throttle Body Injection.
1. Where is the best location for this part? I was thinking in the center console under the armrest.
2. The cutting of the wires, is that behind the speedo or under the car, or near the ECM on the pasenger side.
I am familiar with my car, I just need a starting point. How can I tell the wires that are under the dash or in the center console? I do not want to cut the wrong wires.
I know to twist the wires and I am going to use a good wire with good shielding.
The car is a 1992 Chevrolet Camaro RS - Automatic - Throttle Body Injection.
Thread
Thread Starter
Forum
Replies
Last Post
gixxer92
Engine Swap
33
Apr 12, 2022 12:09 AM
VortecZ
Transmissions and Drivetrain
2
Jan 16, 2002 11:25 AM
