i have a 86 Z with the T-5 and i need to know what you call the part or clip that connects the clutch pedal to the clutch cable (has anyone had to replace this?) when i got the car it was broke and the owner before me used a zip-tie to hold the two together, i didnt know that when i bought the car also has anyone used the poly tranny mount ? is this a good part or not needless to say mine is broken and i get a huge clunk when i start to go i need to get this fixed really fast

thanks

clutch cable????....in an '86??? it should be a hydrolic clutch, with a master cylender attached to the pedel (via a rod) and a slave cylender attached to the trans, they did away with the mechanical linkage in 84, and they never used a cable, they used a Z-bar setup in 82 and 83, also go with the polly, the trans mount is notorious for breaking in it's stock form, I've had a polly one since 98, and it's stood up to a 500 hp engine since then, no probs.

it is a hyd. system but when you look down there you see the pedal and a cable going outside the car. thats all i can see so what holds the pedal to the "cable" going outside of the car

thanks