What 3.73 install kit to order???
Thread Starter
Member
iTrader: (2)
Joined: Jun 2002
Posts: 168
Likes: 0
From: Labrador City, Newfoundland, Canada
Car: 1991 Z-28
Engine: 305 TPI
Transmission: 4L60
Axle/Gears: 3.73
What 3.73 install kit to order???
Have been looking for 2 days now....and the more info I see, the more confused i get!!
I have 1991 Z-28 stock rear, with 2.73 posi, so what I have figured out is that I need a 2-Series carrier that is10-Bolt Ring and Pinion with Install Kit.
I an getting lost with teeth and spline numbers, so quite simply, spend my money, what do I order on Jegs or Summit to have a complete install kit??
Thanks for the time, I just dont want to order the wrong stuff!!
I have 1991 Z-28 stock rear, with 2.73 posi, so what I have figured out is that I need a 2-Series carrier that is10-Bolt Ring and Pinion with Install Kit.
I an getting lost with teeth and spline numbers, so quite simply, spend my money, what do I order on Jegs or Summit to have a complete install kit??
Thanks for the time, I just dont want to order the wrong stuff!!
nothing from what you said, you have a ring and pinion, posi carreir and an install kit. what else do you think you need? you already have a 2 series carrier posi carrier so unless it's broke i wouldn't get another. if it is broke then get another like you have. what are you wanting to do, or what do you think you need to do?
edit: i'd get a solid spacer instead of a crush sleeve
edit: i'd get a solid spacer instead of a crush sleeve
Last edited by ede; Feb 7, 2006 at 02:58 PM.
Thread Starter
Member
iTrader: (2)
Joined: Jun 2002
Posts: 168
Likes: 0
From: Labrador City, Newfoundland, Canada
Car: 1991 Z-28
Engine: 305 TPI
Transmission: 4L60
Axle/Gears: 3.73
Well i was looking at this from Jegs, a GM 7.5'' 10-Bolt Ring and Pinion Packages 3.73 Ratio with 41-11 Teeth, 3.125'' Head Bearing 1.438'' Diameter, 27-Spline Pinion, 7.5'' Diameter Ring Gear. It also comes with a Richmond Gear complete installation kit, two quarts of Red Line 80W140 differential lube and a 4oz. bottle of Jeg's own limited slip additive. Each installation kit includes pinion and carrier bearings, pinion and carrier shims, pinion nut, crush sleeve, pinion seal, cover gasket, gasket sealer, ring gear bolts, thread locker sealant, marking compound and fits Fits 3.08 and numerically lower (2-Series) carrier.
It is item 555-60010K on jegs, just wanted to know if this the correct one to order, or is there a different one that I should get?
It is item 555-60010K on jegs, just wanted to know if this the correct one to order, or is there a different one that I should get?
Thread Starter
Member
iTrader: (2)
Joined: Jun 2002
Posts: 168
Likes: 0
From: Labrador City, Newfoundland, Canada
Car: 1991 Z-28
Engine: 305 TPI
Transmission: 4L60
Axle/Gears: 3.73
or is it just as simple as ordering on Jegs item 836-49-0007-1K , Richmond Ring & Pinion Packages GM 10-Bolt 3.73, 7.5" 2-Series, Richmond complete installation kit; 2 quart bottles of Richmond limited slip lube; a tube of Mr. Gasket sealer; a tube of thread locker; and one container of marking compound??
Trending Topics
Junior Member
Joined: Feb 2006
Posts: 74
Likes: 0
From: Berwick, Pa
Car: 92 RS Vert, 86 Iroc
Engine: Blown 350
Transmission: Slushbox
Originally posted by patricktroyz28
Thanks Bro! Whats your paypal, I could send ya a little something for your time!
Thanks Bro! Whats your paypal, I could send ya a little something for your time!
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
2
Dec 11, 2023 08:14 AM
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
15
Nov 10, 2015 06:17 AM
hectre13
Engine/Drivetrain/Suspension Parts for Sale
7
Aug 26, 2015 08:17 AM
NinjaNife
Tech / General Engine
27
Aug 23, 2015 11:49 AM




again!! 
