I have the t56 in my car and i was having some issues such as my pressure plate squealing when i push the clutch down too far, and also my clutch doesn't engage until my pedal is almost all the way up. I looked around on here and found out it is the 3rd gen pedals doing it because they have more movement then the 4th gen pedals do. Now if I swap to the 4th gen pedals which I plan on doing do i have to undo my clutch line, then rebleed them so my master cyl can be adjusted to the pedal or after installation do i just pump the clutch pedal to re-adjust them?

 

No bleeding, pumping, re-adjusting, or any of that required; just unhook and rehook.