Do I need a lockup kit if IM going from 305 tbi to 350 carb? What else?
Do I need a lockup kit if IM going from 305 tbi to 350 carb? What else?
I really want to rebuild one of the 350 4 bolt engines Ive been packratting.
I want to make it a carb'd car and no way connected to a computer.
Im assuming I can take the computer and all emissions out then
Also, will I need one of those torque converter lockup kits for the 4th gear? Ive got a 700r4
Anything else Ill have to do for the transmission to work?
I want to make it a carb'd car and no way connected to a computer.
Im assuming I can take the computer and all emissions out then
Also, will I need one of those torque converter lockup kits for the 4th gear? Ive got a 700r4
Anything else Ill have to do for the transmission to work?
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: Do I need a lockup kit if IM going from 305 tbi to 350 carb? What else?
You'll need to provide some way to lock the TCC up without a computer. Other than that the only thing the transmission needs is the correct TV cable geometry on the carb.
Re: Do I need a lockup kit if IM going from 305 tbi to 350 carb? What else?
That brings me to another question. Is there some sort of kit that they sell that is easy to install the for tv cable bracketry?
Re: Do I need a lockup kit if IM going from 305 tbi to 350 carb? What else?
I guess this would be correct for lockup kit and tv geometry?
http://www.compperformancegroupstore...ct_Code=376600
http://www.compperformancegroupstore...ct_Code=376710
http://www.compperformancegroupstore...ct_Code=376600
http://www.compperformancegroupstore...ct_Code=376710
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: Do I need a lockup kit if IM going from 305 tbi to 350 carb? What else?
Those should work fine, as long as you have an Edelbrock carb, of course.
Thread
Thread Starter
Forum
Replies
Last Post
