700r4 wont shift into 2nd or 4th
06-16-2008, 01:08 PM
#1
Junior Member
Thread Starter
Join Date: May 2008
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
700r4 wont shift into 2nd or 4th
I have just finished putting my 85 700r4 back into my car after a fresh rebuild and i dont have 2nd or 4th gear but i do have reverse and all the othe gears. could this be the servo?
I replaced all the seals on the servo before reinstalling it and would just like someone elses opinion before i go tearing into it. Any help is appreciated
.
I replaced all the seals on the servo before reinstalling it and would just like someone elses opinion before i go tearing into it. Any help is appreciated
. 
06-16-2008, 07:36 PM
#3
Junior Member
Thread Starter
Join Date: May 2008
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Re: 700r4 wont shift into 2nd or 4th
No,the first time i test drove it after rebuild it just completly skips 2nd so you have to rev it to get it to shift to 3rd then no 4th.
06-16-2008, 08:30 PM
#4
Supreme Member
Join Date: Jul 1999
Location: Calimesa, California, U.S.
Posts: 3,458
Likes: 0
Received 39 Likes
on
27 Posts
Re: 700r4 wont shift into 2nd or 4th
There is a good chance that the band is not on the anchor pin. The pan would have to be dropped to see if this is the case. This can possibly could be fixed from the bottom.
06-19-2008, 02:47 PM
#5
Junior Member
Thread Starter
Join Date: May 2008
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Re: 700r4 wont shift into 2nd or 4th
Ok i droped the pan and it looks as if the pin is seated correctly. The pin looks to be in its bore all the way and i cant really see it on the band but i pushed it with my fingers and it feels like its on it. Any other ideas on what this problem could be.
Thread
Thread Starter
Forum
Replies
Last Post
TheTraut88
Engine/Drivetrain/Suspension Parts for Sale
1
09-07-2015 05:22 PM
rudolphschenker
Transmissions and Drivetrain
1
09-04-2015 02:41 AM
