I finally got my hands on a T56, out of a 96 Z28, complete set,
I do have to get a new crossmember, and get a master cylinder, but other then that, it should work.

My question is, is there any difference of a Camaro T56, to a Corvette T56?
is the torque or hp different? (I know I didnt really word that right, but you know what I mean.)

Thanks,
Tim

 

should be the same hp/tq atings for both...the only difference i knowof is the C5 and C6 t56 is monted in the rear with the transaxle, and has an internal slave cylinder... but still the same hp/tq ratings, up to 450 ft/lbs... i do not know if you can use a C4 slave or master cylinder, but you may be able to use a C4 flywheel, not the ones with the ZF trans...

 

take a look at this, should answer your question


http://www.rsgear.com/articles/2002_07.pdf

 

Thanks, that helps alot

A friend that has a Corvette T56, said it looks the same as his, but he put in a lot of different parts, but I was wondering if the tq or hp were different.

Thanks once again,

Tim