L98 owners: What rpm does tranny shift at?
L98 owners: What rpm does tranny shift at?
Hey all L98 owners, what rpm does your tranny shift at WOT from 1-2. Mine hits about 4500 then shifts into 2. How bout you guys? Do I need to adjust my TV cable?
well, i don't have a L98, but on my LB9 (305) at WOT it will shift at 5500 and my redline starts at 5000 so, 4500 sounds really low on a 350.
------------------
1991 Z28 305 TPI.
Mods: Hypertech Airfoil, gutted airboxes, K&Ns,polished 91' rims (they turned pink!), and all rear end bushings & tranny mout are energy suspension poly ones now
MORE TO COME: Any suggestions on what to do next? I really want to try and make the 305 run 13s (i've mostly been doing basic repair to the car, but now most of its done i have money to mod!)e-mail me@ abraham_39@hotmail.com
------------------
1991 Z28 305 TPI.
Mods: Hypertech Airfoil, gutted airboxes, K&Ns,polished 91' rims (they turned pink!), and all rear end bushings & tranny mout are energy suspension poly ones now

MORE TO COME: Any suggestions on what to do next? I really want to try and make the 305 run 13s (i've mostly been doing basic repair to the car, but now most of its done i have money to mod!)e-mail me@ abraham_39@hotmail.com
1-2 happens at about 5000 rpm.
2-3 goes to around 5200 rpm.
This is after I replaced the Ignition Contorl Module. Can't wait till the tracks open again!
------------------
89 IROC 350 Auto
Custom DUAL Exhaust
Edelbrock Performer 6085 Aluminum Heads
ZZ9 Cam
TPIS Level 5 Chip
14.01 @ 97.0mph with 2.77's gears and a bad ignition control module!
And Free mods.
2-3 goes to around 5200 rpm.
This is after I replaced the Ignition Contorl Module. Can't wait till the tracks open again!
------------------
89 IROC 350 Auto
Custom DUAL Exhaust
Edelbrock Performer 6085 Aluminum Heads
ZZ9 Cam
TPIS Level 5 Chip
14.01 @ 97.0mph with 2.77's gears and a bad ignition control module!
And Free mods.
1-2 at 5500 2-3 at 5000 and 3-4 at 4500
thats after i had the tranny done with new governor,different springs, corvette servo, corvette converter(good mod),blah blah blah, the tranny is great i was running 14.5 before tranny and convertor
------------------
89 iroc 5.7 can't go fast enough
thats after i had the tranny done with new governor,different springs, corvette servo, corvette converter(good mod),blah blah blah, the tranny is great i was running 14.5 before tranny and convertor
------------------
89 iroc 5.7 can't go fast enough
MY TRANNY SHIFTS JUST SHY OF 6,000 AND I HAVE RUN IT THAT WAY FOR ALMOST A YEAR.. I HAVE EVEN HAD IT TO 6300 RPMS.. IT DIDNT EVEN RATTLE. I WAS SURPRISED. AND YES YOU NEED TO ADJUST YOUR TV CABLE.. HOPE I COULD HELP..
------------------
1990 IROC-Z L98 350 TPI
AFPR 49PSI, GUTTED AIR BOXES, K&N, RAM AIR, PORTED PLENUM, B&M SHIFTER, 3.23 LIMITED SLIP, DUAL CATS, STOCK SUPER TURBO EXHAUST, COOPER COBRA XST's
MUSTANGS...ONLY 4 LUGS....HAHA THAT IS HILARIOUS.
------------------
1990 IROC-Z L98 350 TPI
AFPR 49PSI, GUTTED AIR BOXES, K&N, RAM AIR, PORTED PLENUM, B&M SHIFTER, 3.23 LIMITED SLIP, DUAL CATS, STOCK SUPER TURBO EXHAUST, COOPER COBRA XST's
MUSTANGS...ONLY 4 LUGS....HAHA THAT IS HILARIOUS.
Thread
Thread Starter
Forum
Replies
Last Post
someone972
Transmissions and Drivetrain
6
Aug 30, 2015 12:52 AM
Thornburg
Transmissions and Drivetrain
10
Aug 25, 2015 01:46 AM






