creeps forward
Thread Starter
Senior Member
Joined: Oct 2008
Posts: 800
Likes: 0
From: Temple City, CA
Car: 1990 Camaro RS
Engine: V8 305 TBI
Transmission: W/C T5
Axle/Gears: 3.08
creeps forward
I have a '90 RS 305 TBI T5.
The synchros are worn on many of the gears. But another problem is with the clutch I believe.
When it's cold the clutch operates perfectly, however when it heats up to operating temperature the clutch starts slipping I think.
I'll be at a stop and #1 it will be hard to put it into gear and #2 it will start to creep forward slightly. This only happens when it heats up. What could it be? Clutch cylinder fluid?
Thanks to anyone that can help.
The synchros are worn on many of the gears. But another problem is with the clutch I believe.
When it's cold the clutch operates perfectly, however when it heats up to operating temperature the clutch starts slipping I think.
I'll be at a stop and #1 it will be hard to put it into gear and #2 it will start to creep forward slightly. This only happens when it heats up. What could it be? Clutch cylinder fluid?
Thanks to anyone that can help.
Member
iTrader: (2)
Joined: Sep 2007
Posts: 180
Likes: 0
From: mesa, arizona
Car: 84 Trans Am
Engine: 383
Transmission: Tremec TKO
Axle/Gears: 10 bolt 3.73 lsd
Re: creeps forward
Sounds like the pilot bushing is starting to drag on the input shaft after it heats up. That would be a cause for those symptoms that you have.
Thread
Thread Starter
Forum
Replies
Last Post
