Rearend Swap
Thread Starter
Junior Member
Joined: Aug 2009
Posts: 40
Likes: 0
From: NW Ohio
Car: 1992 Heritage Edition Z28
Engine: 305 TPI
Transmission: Stock
Axle/Gears: Stock
Rearend Swap
I'm doing an LS1 sway and will have a complete rearend from a 98 transam, will a 4gen rearend bolt into an 89 thirdgen if not, what needs tobe done?
Supreme Member
Joined: Mar 2003
Posts: 4,771
Likes: 15
From: Florida
Car: 1987 Black IROC-Z (SOLD)
Re: Rearend Swap
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Rearend Swap
Welcome to TGO. A search on site will often provide the info you're seeking. The following FAQ should provide the info you need:
https://www.thirdgen.org/forums/tran...-10-bolts.html
JamesC
https://www.thirdgen.org/forums/tran...-10-bolts.html
JamesC
Supreme Member
Joined: Sep 2008
Posts: 3,777
Likes: 0
Re: Rearend Swap
I see that you are new here. Welcome. Here is some information that might help you. https://www.thirdgen.org/forums/tran...-10-bolts.html
The 4th gen rear end will bolt in, but it is a little wider.
The 4th gen rear end will bolt in, but it is a little wider.
Member
Joined: May 2008
Posts: 377
Likes: 0
From: MN
Car: 86 Z28
Engine: 350 TPI
Transmission: T56
Axle/Gears: 3.42 posi
Re: Rearend Swap
yes it can be done, here is a pic of the lt1 style i have in my car with the stock wheels, just can't have the car full of people on bumpy roads....
Thread
Thread Starter
Forum
Replies
Last Post
Hello, Michael
Engine Swap
8
Aug 20, 2015 03:19 PM
