TH350 Tailshaft
Thread Starter
Junior Member
Joined: Jun 2009
Posts: 57
Likes: 0
From: Yuma Az
Car: 86 Camaro
Engine: 350
Transmission: th350 w/2500 stall
Axle/Gears: 3.73
TH350 Tailshaft
Hi All. Can I replace a 6" tail shaft with a 9" tail shaft on a TH350? Is this a simple project, or should it go to a shop? Many thanks.
Joined: Jan 2002
Posts: 3,449
Likes: 7
From: LONDON, KY
Car: Camaro
Engine: Carbed L98
Transmission: TH350
Axle/Gears: 3.73
Re: TH350 Tailshaft
No, You have to go to the longer output shaft. This requires a full tear down.
You can use the 6" tail shaft trans, but you need the older driveshaft or have one made.
You can use the 6" tail shaft trans, but you need the older driveshaft or have one made.
Thread
Thread Starter
Forum
Replies
Last Post
