Need measurements
Thread Starter
Supreme Member
iTrader: (4)
Joined: Mar 2005
Posts: 1,090
Likes: 0
From: Home of most 3rd gens Van Nuys, CA
Car: 1987 IROC
Engine: Turbo 293ci 4.8l
Transmission: T56
Need measurements
alright i tried searching but couldnt find anything. well my buddy has a disc brake rear end but he doesnt remember if its from a 3rd or 4th gen. what are the measurements i need to determine? or is there a part number on the housing?
Supreme Member
Joined: Sep 2002
Posts: 9,192
Likes: 19
From: Cary, North Carolina
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
Re: Need measurements
From the 10bolt FAQ above in the stickies:
What Is the Width of My 10-Bolt?
Approx. 57" from backing plate to backing plate and 62" from axle flange to axle flange.
This is A 3rd Gen - the 4th gen will be slightly longer (at/about 4 inches longer)
What Is the Width of My 10-Bolt?
Approx. 57" from backing plate to backing plate and 62" from axle flange to axle flange.
This is A 3rd Gen - the 4th gen will be slightly longer (at/about 4 inches longer)
Thread Starter
Supreme Member
iTrader: (4)
Joined: Mar 2005
Posts: 1,090
Likes: 0
From: Home of most 3rd gens Van Nuys, CA
Car: 1987 IROC
Engine: Turbo 293ci 4.8l
Transmission: T56
Re: Need measurements
thanx i must have missed that part. i read through it but mostly saw about gearing.
Thread
Thread Starter
Forum
Replies
Last Post
Elephantismo
Electronics
14
Feb 13, 2019 12:51 AM