9bolt.com
Thread Starter
Junior Member
Joined: Jul 2014
Posts: 23
Likes: 0
Car: 84 Berlinetta
Engine: 305 / 350
Transmission: 700r4
Axle/Gears: 9 bolt 3.45 posi
9bolt.com
Been looking for some 9 bolt friction cones and naturally searched found 9bolt a while back, but now as I get closer to my nine bolt swap I can't seem to find there site anywhere. It just comes up as saying it can't load the page. Are they still in business?
Moderator

Joined: Jul 1999
Posts: 17,262
Likes: 168
From: 51°N 114°W, 3500'
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: 9bolt.com
Probably not.
Just about all 9 bolt parts need to come from Australia. You might have better luck finding a parts vendor from Australia to get anything for it. Since the 9 bolt was only offered for a few years in third gens and only in a few models, there isn't a huge demand for parts in North America.
Just about all 9 bolt parts need to come from Australia. You might have better luck finding a parts vendor from Australia to get anything for it. Since the 9 bolt was only offered for a few years in third gens and only in a few models, there isn't a huge demand for parts in North America.
Thread Starter
Junior Member
Joined: Jul 2014
Posts: 23
Likes: 0
Car: 84 Berlinetta
Engine: 305 / 350
Transmission: 700r4
Axle/Gears: 9 bolt 3.45 posi
Re: 9bolt.com
do you know where i might start looking for parts other than google? i found everything short of the posi cones and carriers
Moderator

Joined: Jul 1999
Posts: 17,262
Likes: 168
From: 51°N 114°W, 3500'
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: 9bolt.com
Good luck finding repair kits for a worn out cone posi. You might have to contact Borg Warner or Eaton.
Although it's not listed as for a third gen, this should be the same BW diff. The GTO is an IRS 7.75" BW diff. You'll have to do your own research but I can't see why this wouldn't fit the third gen solid axle BW diff.
Brand new helical posi for a 7.75" Borg Warner 9 bolt.
http://www.justdifferentials.com/TT9.../tt912a642.htm
http://www.hiredgunoffroad.com/7.75-...-TRUETRAC-POSI
https://totalmetalinnovations.com/in...50c0ae96124475
http://www.rwkhaussupply.com/magento...28-spline.html
Although it's not listed as for a third gen, this should be the same BW diff. The GTO is an IRS 7.75" BW diff. You'll have to do your own research but I can't see why this wouldn't fit the third gen solid axle BW diff.
Brand new helical posi for a 7.75" Borg Warner 9 bolt.
http://www.justdifferentials.com/TT9.../tt912a642.htm
http://www.hiredgunoffroad.com/7.75-...-TRUETRAC-POSI
https://totalmetalinnovations.com/in...50c0ae96124475
http://www.rwkhaussupply.com/magento...28-spline.html
Supreme Member
iTrader: (2)
Joined: Jan 2002
Posts: 9,962
Likes: 5
From: Moorestown, NJ
Car: 88 Camaro SC
Engine: SFI'd 350
Transmission: TKO 500
Axle/Gears: 9-bolt w/ 3.23's
Re: 9bolt.com
Damn, bought a gearset from them not more than two months ago. Hope they really haven't plowed under.
Trending Topics
Junior Member
Joined: Feb 2011
Posts: 4
Likes: 2
From: McHenry, Illlinois
Car: 1988 Firebird Formula
Engine: LS 6.0
Transmission: th400
Axle/Gears: ford 9in 4.11
Re: 9bolt.com
I have cones id be willing to sell, I purchased them from 9bolt about a month ago. finally got to taking the carrier out and i have broken spider gears so im buying a different rear end and im going to sell the cones. they are literally brand new. only took them out of the packaging. message me on here or you can call or text on my cell 815-529-8212.
Supreme Member
iTrader: (2)
Joined: Sep 2009
Posts: 1,591
Likes: 5
From: WI.
Car: 1987 iroc
Engine: 383 TPIS intake, Dyno Don headers
Transmission: 700R4 w/Pro-built Auto/transgo 2-3
Axle/Gears: 3.27/3.70 borg warner 9 bolt
Thread
Thread Starter
Forum
Replies
Last Post
Justin89Formy
Aftermarket Vendor Review
6
Feb 22, 2009 05:30 PM






