Transmissions and Drivetrain Need help with your trans? Problems with your axle?

Source for correct speedo gear?

Thread Tools
 
Search this Thread
 
Old Jun 16, 2016 | 12:53 PM
  #1  
seanof30306's Avatar
Thread Starter
Supreme Member
20 Year Member
iTrader: (4)
 
Joined: Jan 2003
Posts: 1,613
Likes: 10
From: Tulsa, OK
Car: 1989 Formula WS6
Engine: L03 305 TBI
Transmission: T-5
Axle/Gears: 10 Bolt; 3.42 Posi
Source for correct speedo gear?

So, my transmission is out being rebuilt.

While it's out, I'd like to correct the speedo. It was originally a 3:08 geared car. It's now has 3:42 gears.

Can anyone tell me which is the correct transmission gear, and what the best source for it is?
Reply
Old Jun 16, 2016 | 01:39 PM
  #2  
midias's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2004
Posts: 4,526
Likes: 238
From: Henrietta NY
Car: 1984 Trans Am L69
Engine: Sniper EFI Powered 355
Transmission: WC T5 w/ Steel Support Plate
Axle/Gears: 3.42 10 Bolt Posi
Re: Source for correct speedo gear?

All depends on if a cable or electric speedo gear and what rear tire you are running. But with a cable speedo and stock tires 215/60/15 drive gear should be purple 14071731 and driven should be 19 3987919. I get them off ebay or amazon. I made an excel sheet a while back for a mechanical speedo
Reply
Old Jun 16, 2016 | 01:54 PM
  #3  
seanof30306's Avatar
Thread Starter
Supreme Member
20 Year Member
iTrader: (4)
 
Joined: Jan 2003
Posts: 1,613
Likes: 10
From: Tulsa, OK
Car: 1989 Formula WS6
Engine: L03 305 TBI
Transmission: T-5
Axle/Gears: 10 Bolt; 3.42 Posi
Re: Source for correct speedo gear?

Originally Posted by midias
All depends on if a cable or electric speedo gear and what rear tire you are running. But with a cable speedo and stock tires 215/60/15 drive gear should be purple 14071731 and driven should be 19 3987919. I get them off ebay or amazon. I made an excel sheet a while back for a mechanical speedo

Thanks,

I'm pretty sure mine's a VSS. It's an '89.
Reply
Old Jun 16, 2016 | 03:26 PM
  #4  
Orr89RocZ's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (20)
 
Joined: Sep 2003
Posts: 25,895
Likes: 429
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: MWC 9” 3.00
Re: Source for correct speedo gear?

Hard to find vss speedo gears. I just went thru this exercise. Most gears are for cable driven setups

The vss gear is different. Gm apparently only made 15 and 17 tooth drives and 37 and 44 tooth driven.

15/37 is for the 2.73 gear cars. 15/44 works for 3.23's i believe. I did the 2.73 to 3.23 swap and used the 44 gear with 15 tooth even tho it should be 43 to be most accurate

My guess is 44/17 is for 3.08's. Closest you may get is 44/15 for 3.23's but your speedo will be reading fast for 3.42's

Have to do more research to see if more gears exist
Reply
Old Jun 16, 2016 | 03:32 PM
  #5  
seanof30306's Avatar
Thread Starter
Supreme Member
20 Year Member
iTrader: (4)
 
Joined: Jan 2003
Posts: 1,613
Likes: 10
From: Tulsa, OK
Car: 1989 Formula WS6
Engine: L03 305 TBI
Transmission: T-5
Axle/Gears: 10 Bolt; 3.42 Posi
Re: Source for correct speedo gear?

Originally Posted by Orr89RocZ
Hard to find vss speedo gears. I just went thru this exercise. Most gears are for cable driven setups

The vss gear is different. Gm apparently only made 15 and 17 tooth drives and 37 and 44 tooth driven.

15/37 is for the 2.73 gear cars. 15/44 works for 3.23's i believe. I did the 2.73 to 3.23 swap and used the 44 gear with 15 tooth even tho it should be 43 to be most accurate

My guess is 44/17 is for 3.08's. Closest you may get is 44/15 for 3.23's but your speedo will be reading fast for 3.42's

Have to do more research to see if more gears exist
Thanks for the help
Reply
Old Jun 16, 2016 | 05:21 PM
  #6  
MY87LT's Avatar
Supreme Member
15 Year Member
iTrader: (2)
 
Joined: Jun 2006
Posts: 1,699
Likes: 17
From: Southern California
Car: 1987 Camaro LT
Engine: LG4 w/ SLP headers & a 3" catback
Transmission: THM700R4 (Stock)
Axle/Gears: Stock 2.73 gears. No Posi
Re: Source for correct speedo gear?

Try these guys, they may help.

http://www.bowtieoverdrives.com/
Reply
Old Jun 16, 2016 | 07:58 PM
  #7  
jmd's Avatar
jmd
Supreme Member
25 Year Member
Liked
Loved
Community Favorite
iTrader: (4)
 
Joined: Jul 2000
Posts: 6,521
Likes: 91
From: Aridzona
Car: `86 SS / `87 SS
Engine: L69 w/ TPI on top / 305 4bbl
Transmission: `95 T56 \ `88 200-4R
Re: Source for correct speedo gear?

I looked in my stash.

Not what you need, but if someone running 3.90 or 4.10 gears needs them, I have NOS 14071731 and 14090595 (7t drive and 22t steel shaft / VSS driven) GM gears.
Reply
Old Jun 25, 2016 | 10:49 AM
  #8  
John in RI's Avatar
Supreme Member
25 Year Member
Community Favorite
iTrader: (170)
 
Joined: Aug 1999
Posts: 5,260
Likes: 460
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: Source for correct speedo gear?

89 electric speedo for a T5 and 3.42 gears =

7 tooth red DRIVE gear PN= 14071731
20 tooth Driven gear PN = 14090593
Sleeve/Sensor for this gear is PN 25007350

* a 19 tooth DRIVEN GEAR might be the "BEST" fit for 16" wheels,... but I can't find a WHITE 19 tooth electric DRIVEN gear for a T5.

See chart below,.... note "63" is for Berlinetta and Berlinetta used the same electric speedo sensor as the 86-89 Firebirds.



Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
m16a2r
Transmissions and Drivetrain
12
Jul 14, 2016 12:37 AM
MyNasty91
Fabrication
5
Jun 21, 2016 08:24 AM
ZZ42Fast
TPI
2
Jun 16, 2016 02:51 PM
Axel42
Transmissions and Drivetrain
0
Jun 14, 2016 03:24 PM
LarryD
Transmissions and Drivetrain
2
Jun 14, 2016 07:17 AM




All times are GMT -5. The time now is 09:25 PM.