TH350 Driveshaft.
Thread Starter
Junior Member
Joined: Feb 2023
Posts: 1
Likes: 0
TH350 Driveshaft.
I'm getting this 1992 Chevy Camaro RS with a 350/th350 just being recently installed. The driveshaft is gonna be too short so i was wondering what length drive shaft I would need. When the guy installing it measure it
Was
"From the nut in the yoke to the tail shaft seal is 49 inches"
I'll also include a pic of the th350 for reference. Could I just get a driveshaft out of a 1982 Camaro that had the th200c in it? I read in multiple places this would work but I just some reassurance. I would get a shaft made but i'm a teenager and on a budget.
Thanks!
Was
"From the nut in the yoke to the tail shaft seal is 49 inches"
I'll also include a pic of the th350 for reference. Could I just get a driveshaft out of a 1982 Camaro that had the th200c in it? I read in multiple places this would work but I just some reassurance. I would get a shaft made but i'm a teenager and on a budget.
Thanks!
Joined: Jul 2000
Posts: 6,522
Likes: 92
From: Aridzona
Car: `86 SS / `87 SS
Engine: L69 w/ TPI on top / 305 4bbl
Transmission: `95 T56 \ `88 200-4R
Re: TH350 Driveshaft.
The 6" extension housing TH350 should take a TH200 driveshaft. This is yours.
A 9" extension housing TH350 should take a 700-R4 driveshaft.
A 9" extension housing TH350 should take a 700-R4 driveshaft.
Thread
Thread Starter
Forum
Replies
Last Post
anesthes
Transmissions and Drivetrain
20
Apr 9, 2015 07:12 AM
xeroxed
Transmissions and Drivetrain
6
Mar 5, 2004 12:53 PM