V-6 crank kit
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
Wow... I believe you can, but hell, I sure wouldn't want to be the poor slob that helps you. Just thinking about that makes me cringe. Typically, the easier the job, the better you'll do; rent out an engine hoist and pull that baby out before working on it. What's wrong with the crank?
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
nope, the crossmember is in the way. you can't even get the oil pan off without lifting the motor....sorry
Supreme Member
Joined: Jan 2001
Posts: 7,604
Likes: 1
From: ****SoCal, USA****
And seriously,
Junk the engine, find a good running later model engine (2.8/3.1/3.4) and swap all the stuff.
It can be done, YET the MAJORITY OF US HERE
will offer sound advice of not doing the job the way you are thinking
NO MATTER what the end solution will be (better engine or more power).
Rethink your current solution.
Junk the engine, find a good running later model engine (2.8/3.1/3.4) and swap all the stuff.
It can be done, YET the MAJORITY OF US HERE
will offer sound advice of not doing the job the way you are thinking
NO MATTER what the end solution will be (better engine or more power).
Rethink your current solution.
Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Sponsored Vendors
0
Sep 2, 2015 01:35 PM
