codes
Thread Starter
Member
Joined: Sep 2005
Posts: 170
Likes: 0
From: ft lauderdale
Car: 86 camaro z28
Engine: 5.7 carb
Transmission: 700r4
codes
i pulled codes12, 33, 34, 43. can anyone tell me what this codes mean.
thanks. i was told also my computer is bad on my car.
thanks. i was told also my computer is bad on my car.
Senior Member
Joined: Oct 2004
Posts: 575
Likes: 1
From: Smithfield, NC
Car: 1987 Camaro SC
Engine: 2.8L MPFI (rebuilt)
Transmission: 700R4 swapped to T5
Axle/Gears: 3.42 open
A little more info would help, like year and engine of your car.
12 is just to let you know you are in diagnostic mode
33 & 34 are both for your MAF sensor, one is for reading high the other for reading low(or MAP if a speed density system)
43 is Electronic Spark Control: open or short or defective esc module or defective knock sensor or defective ecm
12 is just to let you know you are in diagnostic mode
33 & 34 are both for your MAF sensor, one is for reading high the other for reading low(or MAP if a speed density system)
43 is Electronic Spark Control: open or short or defective esc module or defective knock sensor or defective ecm
Thread Starter
Member
Joined: Sep 2005
Posts: 170
Likes: 0
From: ft lauderdale
Car: 86 camaro z28
Engine: 5.7 carb
Transmission: 700r4
i have a 3.1 firebird auto,
when my engine is cold my car runs alot better and i can spin my tires holding the brake, when hot i lose alot of power, and holding the brake i cant spin the tires.
i got a brand new map, its runs little better . where is this Electronic Spark Control.
i have a knock sensor also. but i dont know where it is on my engine, and how hard is it to change and what tools i need to replace it
and the ecm is the computer right
when my engine is cold my car runs alot better and i can spin my tires holding the brake, when hot i lose alot of power, and holding the brake i cant spin the tires.
i got a brand new map, its runs little better . where is this Electronic Spark Control.
i have a knock sensor also. but i dont know where it is on my engine, and how hard is it to change and what tools i need to replace it
and the ecm is the computer right
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post




