Ok many people have been waiting for this. Me and 2 other friends put this vid together in a few hours. I will let vid do the explaing about the car. Vid was taking with a digital camera and came out amazing dont think there could have been much more of an improvement with a vid camera. Thanks goes out to *******pimpin351 and gary. Car has 107,000 miles is a 1992 Firebird V6 with a 1991 formula hood and 1991 formula front bumper. swapped out the stock taillights for the grid taillights. Car has the 2.8L headers with high flow cat, 2 1/2 inch flowmaster 80 series.

http://www.youtube.com/watch?v=sWqjpkWhLMI

 

That sounds freakin' brilliant!

 

glad you were ok with me posting it here and not under exhaust cause the v8 boys might not have wanted to hear it.

 

Sounds slightly better than mine did N/A because of your headers. The turbo makes a big difference, but I haven't got a sound clip of that (keep blowing motors, lol).

Here's the cat back and I think this was with 1.6 rockers (the 1.7's sounded better, but the stock springs weren't verry happy with them)...

 

sounds good i wish i had gotten a video of my 2.8 before i pulled the motor. mine had headers, y pipe and one dynomax bullet.

 

Both cars sound pretty good. I'll have to get one of mine up once I get the car running again.

 

Both sound good. I cant wait until I get my engine done to see what it will sound like. I took this short video to show what I started with to compair it to what I end up with. All I have done is a Dynomax super turbo exhaust.
Link

 

As does yours, wait till you hear the turbo spool .

 

i also have the same setup as DaSkinnyGuy, except i deleted the cat and have stock manifolds. you got love how these cars start up though, sounds like a v8 but i'm still worryed about backpressure that i've lost.

 

Is it just me or do the cars with the dynomax muffler sound deeper. It may just be me since I have one.

 

I agree, I think they sound deeper and less "crackly".

 

I find that the flowmaster has more of a rumble to it but they all sound simulia in the vids. I know its an expensive exhaust but i want to know what a GMMG Chambered exhaust would sound like

 

Does anyone have an exhaust that isn't dynomax or flowmaster. I'd like to hear a magnaflow possibly.

 

I noticed mine is not a Dynomax while working on the car, it's actually some other brand I never heard of. Seems like I have been running into lots of mis-info lately about my car. I'll look at the name and let you know later.

 

I have a full 3" magnaflow setup, once i get me a camera with sound I'll post a clip here for ya

No headers though, I'm still workin on it Q.Q I have no idea where to start with mods, but my full tuneup is almost complete! =)

 

I have been thinking about doing a magnaflow setup for my car. All that I would need is a muffler.

 

I got the original exhaust

http://s60.photobucket.com/albums/h3...3-21-07021.flv

 

well if you like the sound of mine why not! i definately feel the performance, and god knows i hear it! =)

i have a 3.1L though, might make a difference.

 

mine sounds like that lol wonder why? lol ive been thinking about going magnaflow but that 80series sounds pretty good

 

mine use to be quiet when I bought it could not even hear it running and a few months ago the muffler started going bad and I some how managed to get new exhaust leaks.

 

hydolic144 was just over my house and i couldn't even tell his car was running besides the exhaust leaks...it was crazy.. mine has a lil rumble maybe i can make a "walk-around"/exhaust clip 2morrow

 

Do it, I would make a new one but my car is in the shop.

 

gotta try to barter the cam. from my lil sis lol. today i had to buy her gum to take some pics lol so it all depends

 

Nice G/L getting the camera.

 

I havn't heard your car. Post a clip please. I might get one up of mine.

 

i finally got that camera lol...i think its a new oem exhaust but i'll have to get under and look at it. it came w/ the car btw my MAF is a lil messed up but im fixing that(the first solid rev is the comp.)

http://myspacetv.com/index.cfm?fusea...deoid=13366153

 

Yea that sounds like stock exhaust brings backs those memories

 

haha thanks for clearing that up for me

 

wow it does sound like mine, but my maro has 8 more years and probably 100,000 more miles then yours . Got to love the old stock exhaust.

 

I'll try to have one up today. I'm takin photos now that the rims are done and what not i'll try to get a clip while im at it

 

lol we should just change the name of this thread and call it show a clip of ur v6 exhaust not that i have a problem i really do like this thread. I will also get a clip once i get a camera and my maro a little smoothed out.

 

EXHAUST CLIP:

http://smg.photobucket.com/albums/v6...t=eaca65fd.flv

My car:

http://img.photobucket.com/albums/v6...UFF/after1.jpg

http://img.photobucket.com/albums/v6...UFF/after2.jpg

http://img.photobucket.com/albums/v6...UFF/after3.jpg

http://img.photobucket.com/albums/v6...UFF/after4.jpg

http://img.photobucket.com/albums/v6...UFF/after5.jpg

Tell me what you think ^^

 

Check out my videos...www.McKinneyRacingProducts.com One video is of my V6 idling with old Hooker headers and nothing behind them!

 

trade you exhaust systems damn that actually sounds good. 3" that sounds way better than my 2.5". except i think 3" is bit over kill for our V6s.

 

haha its the only setup he had for magnaflow =P but thanks! i'll keep workin on it so it sounds even better haha

i was usin a picture camera too =/ not very good quality but it worked =P

 

that sounds pretty good dima....pics are nice too

 

Dima you convinced me. I am going with a magnaflow muffler now. There isn't nearly as much rasp with that over my dynomax. Whic muffler did you get BTW.

 

I'm not sure what one I got. I just asked for high-flow performance and he hooked it up with a muffler with 3" connectors =P it's not the bullet style or anything though just a normal muffler. if you can't find one i guess i could always call and ask haha

and thanks ^^

 

I assume that it is an oval muffler, do you know the dimensions? I think that I know which one it is.

 

What is there to "worry" about, other than the torque curve being moved a bit? I have stock manifolds with a fully welded 2.5" catless system through a Dynomax. Been that way for 10+ years, and I haven't seen any issues yet, but would like to aware of something that I may be missing...

 

You can sorta see it in the vid. The dimensions, however, I don't know, sorry But it shouldn't be too hard to find.

 

http://www.youtube.com/watch?v=0QwasPy-h_I

 

I should have said I want to know what the GMMG sounds like on a V6 ive heard the GMMG in person on an LT1 and an LS1.

 

well now you've heard it on an L98 too

 

lmao i just found this one it's a flowmaster check it out it's kinda funny

http://youtube.com/watch?v=IqQ2BNRJEJk

 

Heelareeus



I need to get my car's exhaust on here someday.

 

that kid is gonna kill himself with that car

 

it's just funny how he thinks he has the most bitchin car when it has those rims or what look to be LTD hubcaps lol.

 

Here's a clip of my car. I got headers, !cat, Dynomax cat-back. 2.25" y-pipe to 2.5" for the rest of the exhaust.

http://www.fquick.com/videos/2_8_idle/1901

 

Its not raspy like the flowmaster. What size is your tailpipes because in the vid they dont look 2.5" they look like stock size. And sound was effected by the wind.