UR50SLO

iTrader: (1)

I forgot to mention that I got a tubular K member,Tubular controll arms and the coil-over conversion kit from PA Performance. It's already installed. Took 85lbs off the front and gave me even more room.

The car did start life as a 2.8L with auto.
That's what the sticker in the left corner of the bumper reads still. 2.8L MPFI Lol.

Drew

iTrader: (58)

Hehe I love coupes. Aside from the wheels/tires and clean paint it's quite the sleeper too... I like it!

Being a mod isn't all fun and games... Been there, done that. It's a constant job, you always have to be aware of whats going on in the forum and lock, delete, warn, ban, as necessary. You can't ever please everyone. I don't really miss being a moderator on this forum.

KBcobra

how much did the engine cost? if you dont mind im really interested in doing the same swap in my camaro

UR50SLO

iTrader: (1)

The Buick engine swap can be done relitively inexpensive if you do the work yourself and buy a complete "good" running engine/trans.
Your best to research these two sites:
www.turbobuick.com
www.turbobuicks.com
In the "Hybrid" section. Alot of good info already posted and good fellas that
like to help like I do.
I'm now doing alot more custom turbo installs on 97+ Camaro/FB's with the factory 3.8L The engine is more than stout in stock forum to handle 15-20psi tuned right.
Finishing one right now in my shop. Headers that I made go out to powder coat today. HPTuners supports 97+ V6 Camaro engines. It's the right way to program a turbo car.
Be glad to help if you go this route~
~Scott

grimmcs

iTrader: (1)

I saw your car in anather thread a while back and was in awe then.....Awsome build

Street Lethal

iTrader: (16)

Scott, where do you run? We had a pretty good turn out last Friday night w/some of the guys from TurboBuicks.com over by e-town, do you run in the same area as the MAGNA members (cecil, Atco, e-town etc.)? If so, we're prolly headed back there this Friday night....

-Rob

UR50SLO

iTrader: (1)

I'm all the way in Indiana... Close to South Bend. (top center of state)
Still snow on ground here.
Hope to have the short block here in a few weeks.
Heads have problems.. (old Champion castings) Hope Tom down at Champion can repair them or I might be screwd. New ones are 2500.00 and can't get a set for awhile due to casting shortage.
I'm going to keep optimistic.
~Scott

bl85c

iTrader: (2)

Sweet. Let us know when you dip into the 9's.

91chevywt

my 4.3 v6 truck can take a 305 powered truck, and a 318 powered 01 dodge 1500. i know theyre not thirdgens but thought i'd share lol since my v6 can beat a weak v8. gets good gas mileage for a gas truck too

Fast355

iTrader: (2)

I can't count how many stock TBI 4.3 trucks my stock Q-Jet fed 305 in my Van ran away from.

Dale

iTrader: (12)

I think my old 3.4 camaro could take my 350TPI camaro.

I know my L67 GP will take a dodge ram 318. I'm sure he was

My L67 will take my 350TPI as well.

WS6LOVE

depends on what v6 and what v8. i know that my father's 96 t/a scares the hell outta me. ive been in my own v8's and others, but LT1's and newer generation engines are just stupid fast.

dad's making about 400hp with 30mph

myvmax1

I know my grocery getter (92 RS 3.1) put a few sneaky beatings on some cars of greater displacement. I also know, that more than one of those was due to driving skill, and had my opponent been of comparable gray matter(BRAIN) I would have been beaten. Now days she is a slow cruiser, I leave the but kickin to the 91.


Max,

firebird1992

I have put the smack down on many a v8 everyone knows i have a v6 i have the sign on the hood under the firebird icon and on the sides but waht they don't see is the 12 pounds of bottled kick *** in the back and the magic button that powers it on the dash lol i made many a v8 eat my dust and sometime eat a blown head gasket or two lol

GRANDZINGA

I can tell you for sure that my lightly modded (without NOS) '92 3.1 5speed Firebird will easily smoke my '75 3spd auto Firebird with a stock 455 V8 off the line! The huge 455 with Auto Trans takes too long to catch up.

89-bird

I have a '89 firebird that has beat a mustang gt . I took it off the line then when i hit third it started going pass me so i dropped back to second and wheel hopped and passed the stang and won. Max speed from stoplight to stoplight was around 95-100 mph and distance was a little over a quarter mile. I was running a rear lift with tires that were i think 12in wide and 30 or so inches high and my timeing was really advanced . And yes it is a stock 2.8.

entrig00

iTrader: (1)

Hey Drew. I sat here reading and reading over and over. I have have a 3.1 RS Stick shift Camaro, I love it and enjoy what I have for a stock car. During the take off I seem to be ahead and next thing you know they pass me lol. Drew you just gave me ideas for my Baby...thank you for the info and knowledge !!!

auto-x1990RS

i've done it before. my buddy has an old '86 Firebird with a 305 TBI, i've held dead even with him to 80mph. granted, his car wasn't running perfectly, it needed a tune up. after 80mph, he'd slowly start inching away.

oh and btw, whoever said that a 3.1 3rd gen was 3700lbs needs to put the crack pipe down. mine weighed in at 3321lbs with me in it, and i'm 202lbs.

bl85c

iTrader: (2)

Well I can say that some LO3 cars are an easy target, but my car's not stock either. The motor is though!

d00012

It's all V6s and I4s here. Only V8s you see here are the Corvettes. And I don't think my little V6 can beat an LS7.

tpivette89

so true. my LT4 Vette would make my 2.8 firebird look like it was standing still

project89

iTrader: (1)

atleast i can honestly say my car can beat a v8 lol

d00012

Well aren't we special? Haha, just kidding. I'll be happy if my camaro has half of the horses yours does.

auto-x1990RS

best kill for me had to be 3 Fox's in a row. auto-x really evens the playing field

project89

iTrader: (1)

dam things to big for my sig though

auto-x1990RS

hold on, your little animation is too big??? how is it bigger than this???

project89

iTrader: (1)

files size wise its to big 414k

auto-x1990RS

ah, k. don't mind me, i'm just retarded sometimes

crytical point

Ok I know a modified V6 can go fast but I have a LO3 5speed 3.08 and its not as slow off the line as the auto's, well maybe if you consider 3k clutch dumps and a peg leg burn out till it finally hooks.

If anyone thinks im trying to flame but I have a firebird with a 3.4 and I have had several 60v6 cars and I know what they are capable of. I am just sticking up for the LO3 as being the "slight" upgrade to a v6.

bl85c

iTrader: (2)

Yea, and I can only pick on heavily optioned, undergeared (2.73) L03's with my slightly upgraded v6- and only for so long. It's all over after the first 60 feet. But I can still say I jumped 'em off the line.

robertfrank

iTrader: (27)

Wow, there's alot of L03 bashing in here. I PROMISE you there's not a single NON TURBO'D V6 in here that I wouldn't destroy. But I'm a bit far from "stock". Hell my V8 car weighs less than most the V6er's in here. It's all in how well the car is taken care of. I know when my car was stock, luckily the engine at the time only had 15,000 on it when I got it. so it was FAR from tired. I was CRUSHING my friends 3.1 stick car, (and many other R.I.C.E.R.S) spinning all the way through first gear. ( Peg leg can kiss my a$$).

86transam.man

iTrader: (3)

WOW your car is amazing I love the look. That is a god of Third Gens.

LB9Iroc87

my daily driver/ tinker car is a 1999 Buick Regal LS with a GS supercharger on it, pulley, de screened MAF, and a sweet little cold air will put the 5.0's and 4.6's to shame, well most of em. Not a third gen but it is a V6

TTA850

UR50SLO all I can say is wow, nicely done. I love the engine compartment

Mine has a bunch of old stock junk under the hood but there wasnt much out there back when I was building it 8-10 years ago. It's gone 10.50 at 128mph on racegas at 27psi and 3640lbs and 11.06 @ 120mph on Shell 93 at 18psi and the current 3510lbs. One of these days I'll get to pulling the engine and replacing the stock crank and rods with a forged setup so I can feel better about twisting it some, right now I shift at 5K and tune it to keep the motor below 6K through the lights.

project89

iTrader: (1)

saw ur car out at e-town yesterday very nice man

TTA850

Thanks, sorry if I wasnt more personable yesterday but was trying to concentrate on making sure it was tuned right, it hadnt been to the track in a while and I wanted to make sure it would get me home lol

Street Lethal

iTrader: (16)

Yeah, that's the first thing I said to Paul when we seen you leave the track yesterday to go home, we thought you were driving home on a full slick at first lol. Posted a video of your car in the F/S thread, might as well attach here so others can check it out as well. BTW nice pics, let me know if you need an A/C delete box w/blower motor and wiring harness. Bought one a month ago, but I'm not going to use it....

http://videos.streetfire.net/video/T...LC2_642131.htm

http://videos.streetfire.net/video/T...LC2_642132.htm

TTA850

Thanks for the video's do you think you can amail me them when you get a chance TTA850@optonline.net Thanks in advance

After Sat I was thinking about putting heat back in but right now have so many things projects in the works I just dont have the time. Let me know how much your looking for though

Steve

Friguy

I believe you on that one, my brother had a 4 door G6 with 20 inch Rims. which was a 4cil,I raced him with my 2.8l and he beat me.I was like damn!!

Street Lethal

iTrader: (16)

Sorry for the late response, I'll send them over tonight....

-Rob

UR50SLO

iTrader: (1)

That's where I was... worried about busting my crank and taking out a good running stock block.
Well.. it turned out great last year and ran a full second better than I thought it would.
I ended up going 10.32@133mph on 93oct pump gas at 17-18psi.
On a 6lb foot brake launch. (1.51 60')
I'm changing a few things here this spring to get 9.90's on 93oct.
Honestly I only wanted 10.90's on 93 but my first shake down pass went 10.71@131mph.

I had 3:50 gears in it last year and at the 1000ft mark I was letting up since my shift light was on at 6000rpm.
So... I got 3:25's here ready to go in for duty.
Glass hood and I put a steering rack in last fall.(but after final time at StantonMI.)
I remember your bird from the GMHTP article.

I can duplicate the IC pipes again if your interested!
Take care,
Scott

Lestrey08

i beat my mom's "77 Camaro by about half a car lol 305 bored over by .30 and eldebrock 4bbl carb. with my pretty stock 2.8 only thing not stock is cheapy off brand exhaust prevous owner had put in i wanna complte magna flow

F-Body Demon

iTrader: (1)

Dont want to hurt your feelings but I had a 85 Trans Am with a Q-Jet and I got beat by a HHR LT with two blonde chicks inside laughing thier rear ends off. I caved and bought a GTA 350 after that, and im still not happy. My 350 is just barely faster than a stock mustang with a 6, and im not even on the radar of a new Camaro.

But I love the V-6 Boards, you guys are pushed to make more from less (literally). I honestly think some of the best ideas for the thirdgens come from you guys. Keep up the good work!

Street Lethal

iTrader: (16)

V6F1R3BRD

i think i could beat a v-8 if they spun for about 30 seconds then blew the motor half way down the track....

ya.. just maybe lol

RPOZ28

Scott,I could stare at those engine pics allllllll day long!!!.....NICE car!!....BILL

UR50SLO

iTrader: (1)

Thanks! Still a work in progress.

Buddy get's deals on stereo stuff so He got me a touch screen dvd single sub and amp. Watching movies when driving is cool! Sounds like a theater in there!

I'm entered in Hot Rod's "Drag Week" 5 tracks in 5 days.. no trailers/support cars. 800-1200mi. Just hope to not have a .30ct part take me out.

Here is some pic's with the low cowl hood.
~Scott.

ktmracerx009

iwas able to beat a v8 mustang with my 2.8 camaro thanks to some turns

92camarorv6

so woud u run my 3.4 v6 is juat stock hope the fact that im runing with cobras dont scare u

robertfrank

iTrader: (27)

Nope, bring it. I don't have any problem BEATING them. not running with them. If you can get down here I will happily send you home crying,lol