Well I still gotta get a new one, just dumb. Ill be careful for months, then not watch what Im doing and let the end dangly into a glass of water or pop and there it goes..........

 

llol it ok i keep u posted

 

Just glad all it does is fry the cable and not the USB hub or port in the computer.

You know I have spill proof keyboards. They work well except when it comes to milk. You can't unplug them fast enough for some reason.

 

firebird1992

On your hatch search did ya see any body kits?

Would like to find just a rear kit to bludge out the rear fenders.
Like this but for a Bird.

 

now thats hot it makes the car look more wider it like a vette prototype or a remake of the back to the future car man I'm taking this to my friend right now the only thing stopping me is money that mold cast cost almost 600 dollars

 

https://www.thirdgen.org/forums/body...ody-parts.html

http://www.showcars-bodyparts.com/fi...earfenders.jpg

 

OOO sweet jesus its its wha heaven would be like ....http://www.showcars-bodyparts.com/camaro8292.html ooo my part that i need and was never able to find 0.o omg gumby i would marry u if i was already in a relationship lolol (joking) but i can't believe this ...... GM didn't even have most of these part thanks ooo and as an UPDATE: the mold is done but my v6 finally died on me -.- with a 175 shot this sucks and now it will not start i tired everthing about to part the car out the rods and engine is fine it seems to be a spark problem i got no spark -.- o well got to see if i can get a oter one.

 

184 in 4th gear in a mustang huh. not possible. If you calculate the gear ratio for the trans/rear end ratio and tire size. Even using the most favorable figures the car would have to have about 15,000 RPM. And since no 4.6 could ever do that I think you may have meant 134?

It bothers me when people make stuff up to posture themselves.

 

maybe he had the 4cyl turbo version and honda rev that to 15000 rpm lololol hahah but no that was wrong well i got my V6 ranning again lol this v6 just can't die

 

right after i swapped the auto for the 5-speed in my 86 i took it out on a shake down run with my cousin in his neon on a slight grade his car shut off at 125 and i was pulling away befor his shut off but those days are gone cause i think i need a new cam and my motors torn appart

 

them days are never to far behind

 

some measurments

http://ViragoTech.com/notch/

 

oooo sweet just in time man ur the best we get about to the the mold poured in carbon fiber -.- lot of money but less weight

 

Dunno how helpful they will be, thought it would work out better.
CF being lighter then glass you'll probably want to do some spring or shock work. I got a god 2in raise in the rear with mine. You may get allot more.

Though if it works out you could probably sell a few of them, in CF or glass.
I love teasing folks with it, they all love it, then I say you can't find them anymore hehehehe

 

i got a new speed for you guys it not fast but its up there... in my 87 camaro v6 2.8l i hit 105 the other day. dont know the rpms tho sorry. but i had to slow down car started to shake really bad and scared the **** out of me and o yea the car has 214k on the motor and is still running fine its a 5 speed too.

 

You need new rims, and avoid used rims. Get new, even the cheapest chrome or plain steel ones you can get in the size you want.

Once you have done that, you will do it with ever car you ever own.
The ride and safety is worth it. If ya got monster loot to drop $5000 on rims, thats fine too.

My Bird has the cheapest ones I could find, chrome sawblades in stock size that I painted black. On my Buick I got luck and a trailer and big truck place has factory stock steel rims for $67 each. [Hate chrome, chrome rust. powder or paint.]Course I also run new tires.

You will thank me later as once ya experience it, you do it for ever car you own from now on. Then do it for others. Good family gifts where everyone chips in for like one person b-day and get them new tires. LIke getting a hair cut feeling with a girl with big *****, a low cut shirt and apparentaly can't feel her rubbing them all up against you good [A shampoo and conditoin hair cut.]

 

yay im saving up to put outlaws 2 on my camaro its 65$ each rim brand new.

 

well i cant say top speed yet but how about

0-83mph in 8.3 seconds
0-105mph in 13 flat

 

wow this thread had a little life lift in it i see we everyone i have a new problem -.- high oil pressure after my last oil change i use the same oil and filter idon't know what happen and today i just got back form vacation started the car up and took it for a drive after it warmed up and the oil gauge went be on the last high line i don't know what that is in PSI but still and i was going 35-40mph wtf going on

 

I have a '87 berlinetta with the 2.8 I have a little taller tires, my speedo tops out at 85mph. On my way up to Epping, NH dragway on 495N, I raced a newer V6 mustang. While the motor was in OD it was @ about 2500rpm, idk how fast I was going but the speedo was back @ 5-10mph. But at 70mph it only turns 1500rpm, but dosnt get out of its own way, just to make a pass i need to put it into 3rd.

 

So you mean that the needle was at the highest line? Your oil pressure sender might be bad. Mine would go the extreme...changed the sender and it fixed it.

 

second, oil pressures fine, its just the reading. mine hits the roof whenever the cars moving, allways reads when i first start it though so i can give it a quick check.....

 

Fastest in my car was about 122 when I hit the speed limiter. I have a 1992 3.1V6 automatic. I was doing about 80 when I came to a straight section of road that is about 1 1/2 miles long. It hit the speed limiter 3 times before I let out of it. Each time it would cut the fuel or retard the timing or something until It got back down to 115, then it would give me full power again. When it hit that speed limiter, the car would really check up, and it felt just like you had let out of it completely.

That was a really dumb thing to do, though. I was 18 and felt like I was 10 feet tall and bullet proof. That is the sort of stuff that gets your license taken away, or worse, gets you pushing up dasies!

I know that they have speed limiters on some models not because of the abilities of the car, but because of the ratings of the tires that they put on them. Even some of the early 3rd gen (meant to say 4th gen) Z28s had 108 MPH speed limiters. Those cars also came with tires that were only rated for 108 MPH, not Z speed tires.

 

mmm good to be young and bullet proof lol just joking i just feel people must live there life to the the limit then kick it up a bit and also you have 125mph (well i do) or for so lucky people 150mph on the dash so it must be there for a reason and the oil fixed it self i think maybe it the NOS or something i had a leak a week ago in the intake -.- that was fun trying to drive 25 on the street and the engine roaring lol well keep it up guys carare made to go you just the limiter on how fast and hard they go so get out! lolol

 

its been a lil over a year sence i totaled my 88 2.8 but i had the iroc speedo in it was an auto car swaped for the five speed. na i hit 135 flat open plain going to arizona on the way back i had a full bottel squezing a 100 and it didnt take long from 120mph to wrap that speedo out they do have potential just you gata have the pockets to do it well do it right

 

when i still had my 3.1 v6 car it took few min but i got the needle pegged judgeing by some where around 130 pretty much stock with a tpi dual snorkle intake there was diffently no limiter on that car like the tbi cars have 112 and BAM bounce and think you broke something till you do it again and notice its a limiter lol

 

I buried my needle on the 85 mph speedo. I was around 95-100 and could still feel it pulling in 5th.

 

well tell me this project..i can hit 50 in 1st gear and only at 5 grand no where near redline what gears would i have in my 88 bird..i have no clue what they are..its a t5 tranny..and has a 160 speedo in it on a 2.8 ..help me out with this

 

20 bucks says u have a v8 tack installed and its reading about 2k rpms to low

 

I have had mine past the 120 on the speedo on some occassions . I am running stock everything except tires are BFG TAs in 225-60-15 . The car is 5-speed , 2.8 , and it has 190,000 + on it and runs great and has plenty of power for a 2.8 .

 

I got my 4-cylinder cavalier up to 108. and i have beaten the crap out of it, 150XXX miles. it takes for ever, i was sure i was going to get caught lol. must have taken at least 5-10 miles and i started out going 85 lol.

 

ive pinned my 125 speedo at about 4grand in 4th just about every day home from work ... may have something to do with my idle being messed up now

 

nice to know this thread is still alive and i have a new up date 139mph 3.1v6 took the carp plastic intake off topped the 150ph Nitrous nossles on got my firends gps to get the speed and 3 miles later with the car wanting to take off i hit 139 it was fun but now the rear-end makes noise at different speed mmm same **** different day lolol

 

..

nope the tach is dead on..had someone in the car call out the nums while i did the digital timing light they matched up....


there is one more thing..2.8 had flat tappet lifters right...when i took my heads off the other day to clean them i took the lifters out too..they were roller lifters..someone has done some work on this motor i'm the 4th owner..the 2nd owner was a speed freak i found out

 

if u could never get that top end b4 then there might b an issue with your tranny.90mph is third gear.anything over that is forth.if your getting 98mph and then loosing power third gear is dragging ut b4 finally going into 4th and giving you that final push,you might wnna watch pushing it if its been doing this for a while because it can kill your tranny

 

Had mine at about 130 I think. That was over in Germany. I usually averaged anywhere between 100-120.

Found out at around 90 in the rain the wind forces it's way under the blades and all they do is spread the water instead of wiping it away.

Periods and commas are great.

 

Yeah, thats what I get going uphill pretty much. Drives real smooth going fast. I'm gonna get a vid tomorrow of my speedo. 3.1L auto stock 92' firebird.

 

92' firebird v6 auto 3.1l stock
Was in (Drive) the whole time. Needs a tune-up. Coulda gone ALOT faster but slid out in the next gear. Also had the hatch compleatly off and t-tops off
Vid : http://www.youtube.com/watch?v=BeWpY...e=channel_page

 

hah yeah i got my license almost 3 years ago... damn i was a stupid kid then lol. my first car was a 1993 saturn sl1. piece of junk that was. anyways, i thought it would be a good idea to learn how to drift in my neighborhood (a cowtown with a lot of turns in certain areas). i actually did pretty good. i knew the area so when i got to a certain spot (it was a really sharp triple s turn that you cant see anything past the turn) i slowed to slower the speed limit. wound up hitting wet leaves (it rained 2 days before) and my traction control went off and my breaks wouldnt work (known problem for that car). wound up drifting by accident the whole 3 turns, until i slid off the road and hit the mailbox (made out of a TELEPHONE POLE) of the local illegal arms and meth dealer. someone called the cops and told them i was trying to flee the scene even though my car was stuck under a telephone pole. the cops came and slid on the leaves too (they were doing like 5mph) and gave me a speeding ticket. of all times to get a speeding ticket that day.... i was doing like 65 before and i was doing 15 when i crashed and the speed limit was 25.

did i mention that all this happened 2 hours after i got my license?



oh yeah and the most i got my 2.8l to go was 115mph on the highway. least thats what my gps said i was doing (speedo only goes to 85), and it usually underrates my speed

 

here is one for you guys,
Clocked by a center hill cop in FL @ 137mph,
top of redline in 3rd, i backed off to shift into 4th and it was only at 4000rpm. car has potential to hit almost 150 in 4th with the throttle valve and plunger for WOT 4th gear shifts. 2.8 w 700r4, not sure the gears in the rear. alloy 16's with 225/60 r16's. swapped the stock intake for a specter cone filter, and bosch platinum plugs. timing gears were replaced with single tooth gears @ 10* timing and a thrush welded muffler with brand new pipe and cat hollowed out. run on plus fuel from shell and lucas oil stabilizer.

the 2.8 with 700r4 is fast top end, raced a 02 civic on I-75 on my way back from tampa(civic is electronically governed to cut out at 120mph), well he disappeared in a hurry from my rear veiw, he was on my a$$ till 120, but couldn't pass. Ive walked off on bmws and porsches @ 80mph roll on.

I go to ITT Tech in tampa and it normally takes an hour to get there from where i live @80-90mph, WOT all the way home, engine screaming, speedo needle bent from hitting the trip reset button, made it home in just under 30 min. all this with over 200,000 miles. then again i do regular maintenance( oil change every 3,000, clean the plugs and check everything at the same time) lucas fuel additive every couple tanks, and the occasional seafoam in the brake booster line; makes a hell of alot of smoke but damned if the car isnt pepped up noticeably.

I love the platform of the 3rd gen f-bodys, they handle like a dream. They outperform Ferrari's and Porsche's in handling, due to their low center of gravity. I LOVE MY RS!!!!!

My plan is to outrun a hayabusa, and please dont tell me its not possible, because it is. I have the plans, now i just need the money
I hate being unemployed.

 

I live in Tampa...I'd love to see this killer 2.8 you've got.

 

Well it sure is quick for a 2.8, but definately not killer. the 700r4 is a top end tranny, i would compare it to the powerband on a dirt bike, once it gets over a certain rpm, you can feel it put you in the seat. of course i dunno if the previous owner had done anything to it, but when the timing kept jumping i took a look, it had the twin tooth gears and the chain was streched to hell, i put the single tooth gears in and it was much better.

 

No, the 700r4 is most definitely a short tranny. The 3.06 1st gear has a huge gap between 2nd gear which is 1.63:1. They won't shift to OD at wot without modification, so at 1:1 your final drive determines max speed assuming you have the power to push it.

I say BS on 150mph with a mostly stock 2.8L V6. L98's barely did that with 100hp more. Even 137mph is questionable. The 3.1L v6's barely ran better than 130.

With optimal gearing it would take a thirdgen roughly 140hp to simply push the body through the air, not including rolling resistance and other parasitic losses.

 

LOL

 

http://c3.ac-images.myspacecdn.com/i...a940b15e62.jpg

i pulled 110 with it. 3.1 V6. Shook pretty bad around 70 to 85 mph.

thank god no cops out that day.

 

lol your gonna out run a busa.... man even with a turbo on my 3.4 a busa is gonna walk all over me...and sure as hell gonna kill whatever you do to your 2.8, or any other motor your gonna put in there. yes i know how fast they are ive rode one, and i own a 04 R1. hell ill drive there to see that..what are the plans i have to know

 

Bad drive shaft... and hitting the vehicle velocity limiter...

RBob.

 

Well, I haven't gone super fast in a Camaro or Firebird...yet, lol

4 years back or so, I topped out my first car, my 96 Chevy Lumina 3.1. The governor kicked in around 108 mph or so, but I felt that it had a little bit more in it that was being held back. This was out in the middle of nowhere of course, where it was safer to attempt than a busy section of highway. The car cruised along quite nicely at about 100, but it was getting some pretty crappy gas mileage, LOL.

Probably gonna be more careful w/my Firebird though, since it's a bit more of a cop magnet, and the fact that a few years to mature has told me that it I should keep the majority of the aggressive driving on the track. That, and I like having cheap auto insurance

 

That's what I told the previous owner. He said its a u joint. both joints checked out fine before I pulled the 110 mph stunt.

I call on that one.

 

I'm not sure if you are calling on the previous owner or what I posted. Best thing to do is to get an aluminum shaft from a 1998 - 2002 V8 f-body. Or a new one for those MYs.

RBob.