Third Generation F-Body Message Boards
0 2021/04/06 18:22:59
Sanding dash and masking speaker block out plates.
Sanding dash and masking speaker block out plates.
0 2021/04/13 18:26:02
Will be running Vintage Air windshield defroster and floor heat. 3 season show car.
Will be running Vintage Air windshield defroster and floor heat. 3 season show car.
0 2021/04/13 18:26:38
Inserted MDF into dash to build up vent delete area.
Inserted MDF into dash to build up vent delete area.
0 2021/04/13 18:27:08
Another shot of vent depression delete.
Another shot of vent depression delete.
0 2021/04/13 18:38:03
Window defrost vents closed too. Plan to have windows open most of the time. You can see the defroster vents temporarily hot glued in place.
Window defrost vents closed too. Plan to have windows open most of the time. You can see the defroster vents temporarily hot glued in place.
0 2021/04/13 18:38:22
Under side with healthy application of short strand filler to lock everything in place.
Under side with healthy application of short strand filler to lock everything in place.
0 2021/04/13 18:38:36
Felt installed and stapled down. Lools fairly decent just like that, haha.
Felt installed and stapled down. Lools fairly decent just like that, haha.
0 2021/04/24 03:08:34
0 2021/04/24 03:08:47
Here you can see some of the dozens of staples keepimg the felt on. It is also held on with spray on adhesive.
Here you can see some of the dozens of staples keepimg the felt on. It is also held on with spray on adhesive.
0 2021/04/24 03:09:49
Here is what the dash pad looks like after a soaking of fiberglass resin.
Here is what the dash pad looks like after a soaking of fiberglass resin.
0 2021/04/24 03:12:20
0 2021/05/10 18:52:19
Resin applied to felt
Resin applied to felt
0 2021/05/18 18:18:33
Fiberglass cloth applied over another helping of resin, then more resin on the cloth. Pic is after initial sanding of final resin.
Fiberglass cloth applied over another helping of resin, then more resin on the cloth. Pic is after initial sanding of final resin.
0 2021/05/18 18:19:38
First few applications of filler to get the realy low spots of the glass smoothed out.
First few applications of filler to get the realy low spots of the glass smoothed out.
0 2021/05/18 18:21:51
Showing inside Rundo application
Showing inside Rundo application
0 2021/05/18 18:25:19
Just about dry
Just about dry
0 2021/05/18 18:25:28
"Rundo" applied. Mixture of filler and resin. Something like 60% filler. Applied with a brush.
"Rundo" applied. Mixture of filler and resin. Something like 60% filler. Applied with a brush.
0 2021/05/18 18:25:36
0 2021/05/20 15:56:23
0 2021/05/20 15:56:43
0 2021/06/23 05:10:59
0 2021/06/23 05:11:23
0 2021/06/23 05:11:29
2 coats of really high build primer.
2 coats of really high build primer.
0 2021/06/23 05:13:33
Guide coat
Guide coat
0 2021/06/23 05:13:38
0 2021/06/23 05:13:44
2 coats of very high build primer
2 coats of very high build primer
0 2021/06/23 05:15:25
Guide coat
Guide coat
0 2021/06/23 05:15:32
0 2021/06/23 05:15:37
All the touch ups needed
All the touch ups needed
0 2021/06/23 05:18:29
Guide coat sanding
Guide coat sanding
0 2021/06/23 05:18:34
Tacked off and ready for final primer, normal high build
Tacked off and ready for final primer, normal high build
0 2021/06/23 05:18:39
0 2021/06/23 05:21:39
0 2021/06/23 05:21:44
Filler panel for center vents
Filler panel for center vents
0 2021/06/23 05:21:48
Brackets
Brackets
0 2021/06/23 05:27:30
DS didn't fit. In my opinion donor car they used to design them was messed up. My car, to the best of my knowlgde is straight and crash free. PS and DS dims match for mounting studs. Corbeau has a different dim for front DS spacing. This is wrong. After a call to them, concluded that drilling out mount hole for 2 holes by 1/16" will do it. It worked.
DS didn't fit. In my opinion donor car they used to design them was messed up. My car, to the best of my knowlgde is straight and crash free. PS and DS dims match for mounting studs. Corbeau has a different dim for front DS spacing. This is wrong. After a call to them, concluded that drilling out mount hole for 2 holes by 1/16" will do it. It worked.
0 2021/06/23 05:27:35
Corbeau seats! Getting close to test fit time so I can design the center console and door panels.
Corbeau seats! Getting close to test fit time so I can design the center console and door panels.
0 2021/06/23 05:27:41
0 2021/06/23 06:09:51
Small dent on bottom of tach and mounting stadoffs cut off the fuel pressure gauge to fit into a-pillar pod.
Small dent on bottom of tach and mounting stadoffs cut off the fuel pressure gauge to fit into a-pillar pod.
0 2021/06/27 16:46:26