Third Generation F-Body Message Boards
0 2020/06/14 22:06:28
Or FiveStar Bodies.
Or FiveStar Bodies.
0 2020/06/14 22:06:18
0 2020/06/14 22:05:28
You can go to Norris Racing
You can go to Norris Racing
0 2020/06/14 22:05:24
0 2020/06/14 22:03:57
0 2020/06/14 22:03:53
You can go to Norris Racing
You can go to Norris Racing
0 2020/06/14 22:02:10
0 2020/06/14 22:02:06
Lower panel under column made. Almost ready to blow it all apart and paint. Then put it all back together again.
Lower panel under column made. Almost ready to blow it all apart and paint. Then put it all back together again.
0 2020/05/31 17:35:43
0 2020/05/31 15:48:38
0 2020/05/25 17:26:36
0 2020/05/25 17:26:20
Dash is slowly coming together
Dash is slowly coming together
0 2020/05/24 20:57:48
Dash is starting to take shape
Dash is starting to take shape
0 2020/05/16 20:17:56
0 2020/05/16 20:17:35
0 2020/05/03 17:03:32
0 2020/05/03 16:41:45
0 2020/05/03 16:41:35
Mending plates around windows all welded in. Will do some finishing work later. Just trying to get all the welding done.
Mending plates around windows all welded in. Will do some finishing work later. Just trying to get all the welding done.
0 2020/05/03 16:41:26
Upper window net mounting tubes are in.
Upper window net mounting tubes are in.
0 2020/05/03 16:41:17
New tabs made and welded for the ECM to sit on
New tabs made and welded for the ECM to sit on
0 2020/05/03 16:38:45
0 2020/05/03 16:38:37
Windshield strap tabs are all welded in place
Windshield strap tabs are all welded in place
0 2020/05/03 16:38:28
Windshield support mounting tabs made and mocked up.
Windshield support mounting tabs made and mocked up.
0 2020/05/02 19:19:21
Plates are fitting good.
Plates are fitting good.
0 2020/05/02 19:19:12
Fitting pretty good
Fitting pretty good
0 2020/04/25 17:48:47
Starting templates for window opening mending plates
Starting templates for window opening mending plates
0 2020/04/25 11:17:04
0 2020/04/25 11:15:37
Got all my interior bars done
Got all my interior bars done
0 2020/04/25 11:14:15
0 2020/02/16 17:24:46
Got the lower door bars stitched to the rocker pinch weld.
Got the lower door bars stitched to the rocker pinch weld.
0 2020/02/15 17:01:37
And got the upper dash bar welded up.
And got the upper dash bar welded up.
0 2020/02/15 17:01:28
0 2020/02/15 17:01:21
Im giving these a try on my car. If you know anyone doing a lift kit on the new 2018 and up jeep JL wrangler, they have these grey rubbery plastic isolater's on the factory springs. Its kinda the same thing as cutting the hose, but its already split and made the right size. Theyre working so far on my car. Not sure how long theyll last, but i didnt spend any money on them and thought id give em a try.
Im giving these a try on my car. If you know anyone doing a lift kit on the new 2018 and up jeep JL wrangler, they have these grey rubbery plastic isolater's on the factory springs. Its kinda the same thing as cutting the hose, but its already split and made the right size. Theyre working so far on my car. Not sure how long theyll last, but i didnt spend any money on them and thought id give em a try.
0 2020/02/14 21:21:28
Good to have the car on the ground again. Started welding some bars in.
Good to have the car on the ground again. Started welding some bars in.
0 2020/02/01 18:43:54
Put new fittings on rear for fluid cooler lines and repositioned the sway bar so the sway bar wont hit the fittings
Put new fittings on rear for fluid cooler lines and repositioned the sway bar so the sway bar wont hit the fittings
0 2020/02/01 13:33:09
0 2020/02/01 13:33:00
Just a few more bars to fit and then i start welding. Yes i know its gotten way out of hand and more cage than i need. But what the hell.
Just a few more bars to fit and then i start welding. Yes i know its gotten way out of hand and more cage than i need. But what the hell.
0 2020/01/19 17:12:48
Diagonal door bars fitted.
Diagonal door bars fitted.
0 2020/01/12 16:18:51
0 2020/01/12 16:18:41