Third Generation F-Body Message Boards
0 2021/08/15 21:06:27
0 2021/08/15 21:06:25
0 2021/08/15 21:06:23
Got the new shocks and struts in. Front struts took a little grinder massage to the spindles to get them to fit. But theyre in.
Got the new shocks and struts in. Front struts took a little grinder massage to the spindles to get them to fit. But theyre in.
0 2021/08/14 14:39:59
0 2021/08/09 21:16:58
Driver side took a little extra time figuring out how to work around the extra large cavity in the back used for fuel filler neck access. But got it done.
Driver side took a little extra time figuring out how to work around the extra large cavity in the back used for fuel filler neck access. But got it done.
0 2021/07/31 15:34:40
Finally got around to new rear inner fender well panels.
Finally got around to new rear inner fender well panels.
0 2021/07/31 15:34:27
0 2021/07/25 17:42:08
Coming together little by little. Cant wait for the new shocks to come in. Couple more week till then.
Coming together little by little. Cant wait for the new shocks to come in. Couple more week till then.
0 2021/07/25 17:41:40
Dash top painted and in. Only had gloss black on hand. Might go back and paint it flat black
Dash top painted and in. Only had gloss black on hand. Might go back and paint it flat black
0 2021/07/25 17:39:03
0 2021/07/25 17:38:06
0 2021/07/25 17:37:21
One side defroster vent opening done
One side defroster vent opening done
0 2021/07/23 19:51:27
Almost done with the dash.
Almost done with the dash.
0 2021/07/17 16:45:55
0 2021/07/17 16:45:48
Then my awesome neighbor (Tom's race car fabrication) let me borrow the use of his brake and bead roller. Now i need to make the cuts for the windshield defroster vents. Then paint and install.
Then my awesome neighbor (Tom's race car fabrication) let me borrow the use of his brake and bead roller. Now i need to make the cuts for the windshield defroster vents. Then paint and install.
0 2021/07/09 21:56:26
Finally got around to making the top panels for my dash. Cut and flanged and fit.
Finally got around to making the top panels for my dash. Cut and flanged and fit.
0 2021/07/09 21:56:11
0 2021/07/05 10:47:09
0 2021/07/05 10:41:56
0 2021/06/19 14:19:20
Need to get the acetone and take off that over spray.
Need to get the acetone and take off that over spray.
0 2021/06/19 14:19:11
Got the adjustable track bar kit in. Ran into small problems with having a 9" ford rear. Have to modify the support rod mounting bracket and special order a custom u-bolt to fit the 9". Also the weld in support wont fit with the weight jacks so ill have to make one. Other than that, very easy install and cant wait to test and tune with it.
Got the adjustable track bar kit in. Ran into small problems with having a 9" ford rear. Have to modify the support rod mounting bracket and special order a custom u-bolt to fit the 9". Also the weld in support wont fit with the weight jacks so ill have to make one. Other than that, very easy install and cant wait to test and tune with it.
0 2021/06/19 14:19:03
0 2021/06/19 14:18:56
Got the back finished up, welded and painted
Got the back finished up, welded and painted
0 2021/06/14 19:44:21
Got the rear jacking point finished welded and painted. Just measured up for new shocks as the car is now about an inch lower than stock shocks bottomed out.
Got the rear jacking point finished welded and painted. Just measured up for new shocks as the car is now about an inch lower than stock shocks bottomed out.
0 2021/06/14 19:44:15
Got my race car gas pedal with the toe lift bar modified and in. Coming right along.
Got my race car gas pedal with the toe lift bar modified and in. Coming right along.
0 2021/05/30 20:33:50
Got the seats in and down tight and belts fitted
Got the seats in and down tight and belts fitted
0 2021/05/30 20:33:20
Got the dynaliner pad in the roof reliefs. and put my new dome light in.
Got the dynaliner pad in the roof reliefs. and put my new dome light in.
0 2021/05/30 20:32:53
Got the cluster in
Got the cluster in
0 2021/05/02 14:19:06
Got the dash together and the master power switch hooked up and mounted.
Got the dash together and the master power switch hooked up and mounted.
0 2021/05/02 14:18:40
Got the passenger seat in and the seat back supports in.
Got the passenger seat in and the seat back supports in.
0 2021/04/17 18:12:30
0 2021/04/04 21:29:21
0 2021/02/21 17:38:32
0 2021/02/21 17:35:21
Battery and battery box in and mounted. And cables run to main power shut off and onto the solenoid.
Battery and battery box in and mounted. And cables run to main power shut off and onto the solenoid.
0 2021/02/21 17:35:08
0 2021/02/21 08:39:24
I found another point of view for you. As you stated its not as bad on the backside of the fender. So this shot its not as extreme looking. I think an inch less backspace would be best. Not just for the stickout. But the scrub radius as well to keep from too many mods to the inner fenders and fenders.
I found another point of view for you. As you stated its not as bad on the backside of the fender. So this shot its not as extreme looking. I think an inch less backspace would be best. Not just for the stickout. But the scrub radius as well to keep from too many mods to the inner fenders and fenders.
0 2021/02/20 17:37:19
Got the new battery tray mounted as well.
Got the new battery tray mounted as well.
0 2021/02/20 17:24:56
Got the AC controls mounted
Got the AC controls mounted
0 2021/02/20 17:24:45
Sorry for how crude my drawing is. So the red is the outline of the stock battery tray. The green line is following the new inner fender seam. The right side would be the frame. The left you can see i cut it and pushed the inner fender away from the tire about 3" to keep the tire from rubbing. But now the battery wont really fit here anymore. As i recall i cut the fender itself into the parking light to get it to clear as well. Sorry no photos of that.
Sorry for how crude my drawing is. So the red is the outline of the stock battery tray. The green line is following the new inner fender seam. The right side would be the frame. The left you can see i cut it and pushed the inner fender away from the tire about 3" to keep the tire from rubbing. But now the battery wont really fit here anymore. As i recall i cut the fender itself into the parking light to get it to clear as well. Sorry no photos of that.
0 2021/02/20 17:15:44