Killr TA

Since i am tired of seeing a million new posts about the Holley Stealth Ram when the questions have already been answered a million times, here you go (moderator may want to make this one sticky)

if i am wrong on any of these, let me know and i will change them

P/N's:

7540 or 7540P for Manifold upper and lower (P is for polished version)

534-185/186 for fuel rails

Dyno numbers:

http://www.chevytalk.org/forums/Foru...ML/000534.html

Hood fitment:

https://www.thirdgen.org/techbb2/sho...hlight=stealth
(scroll most of the way down)
that post answers many questions

gasket mateched to a fel-pro 1205 already, for more info on going to a different gasket, go here:

https://www.thirdgen.org/techbb2/sho...hreadid=101299


that covers a lot of things, but i will do more later

Guido

Thanks for taking the time to collect all this. Helpful to say the least.

Guest

Guys, this means intake base, and intake plenum. Both. There are NO RUNNERS! You cannot reuse your old TPI intake base, runners, or plenum.

BTW Killr TA, thanks for this post. Saves me the time of doing it myself.