4 sale fuel parts, ecm's, rockers & CAI
Thread Starter
Member
iTrader: (1)
Joined: Apr 2001
Posts: 402
Likes: 2
From: Davenport,IA
Car: 90 Camaro
Engine: 418 LS3 whipple charged
Transmission: Magnum T56 w/ Street Twin
Axle/Gears: 3.27 9 bolt
4 sale - fuel parts, ecm's & CAI
1 set of TPI polished fuel rails with accel adj pressure regulator
1 new billet fuel filter made by peterson, it is very similar to a aeromotive fuel filter, AN-6 inlet and outlets
2-730 ecm's
1-749 ecm
I also have a set of stamped steel crane 1.6 rocker arms the were only used for about 5000 miles. $25 SOLD
Complete Cold Air Induction This is a custom CAI that I built for my camaro, it uses 3 of the stock sized camaro filters. All of the filters are K&N and I will include an extra 1. $200
I live in Davenport so if anyone wants to see the parts let me know
1 new billet fuel filter made by peterson, it is very similar to a aeromotive fuel filter, AN-6 inlet and outlets
2-730 ecm's
1-749 ecm
I also have a set of stamped steel crane 1.6 rocker arms the were only used for about 5000 miles. $25 SOLD
Complete Cold Air Induction This is a custom CAI that I built for my camaro, it uses 3 of the stock sized camaro filters. All of the filters are K&N and I will include an extra 1. $200
I live in Davenport so if anyone wants to see the parts let me know
Last edited by 355SS; Dec 29, 2006 at 02:53 PM.
Supreme Member
iTrader: (1)
Joined: Feb 2003
Posts: 1,122
Likes: 1
From: THE QUADS
Car: FBODYS
Engine: ALWAYS 8'S
Transmission: ALWAYS MENTAL
Axle/Gears: RUSTY AND BRAND NEW
Bump!
Coolant temp sensor worked great and so did the new alternator. SES is out now and I am happy as ____ ! Once again thank you for your help and the perfect condition parts.
Excellent person to deal with!
Coolant temp sensor worked great and so did the new alternator. SES is out now and I am happy as ____ ! Once again thank you for your help and the perfect condition parts.
Excellent person to deal with!
Supreme Member
iTrader: (2)
Joined: Jul 2003
Posts: 3,205
Likes: 0
From: Dallas, TX area
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
Any more detailed info on the CAI? Tube diameter, close ups of the box and how plumbed, etc.?
Thread Starter
Member
iTrader: (1)
Joined: Apr 2001
Posts: 402
Likes: 2
From: Davenport,IA
Car: 90 Camaro
Engine: 418 LS3 whipple charged
Transmission: Magnum T56 w/ Street Twin
Axle/Gears: 3.27 9 bolt
OD is 3.5" here is another picture from a different angle.
Last edited by 355SS; Dec 29, 2006 at 02:53 PM.
Trending Topics
Thread Starter
Member
iTrader: (1)
Joined: Apr 2001
Posts: 402
Likes: 2
From: Davenport,IA
Car: 90 Camaro
Engine: 418 LS3 whipple charged
Transmission: Magnum T56 w/ Street Twin
Axle/Gears: 3.27 9 bolt
I don't have any pics of the actual rockers at this time but here is a pic from the crane website, they are the ones on top. They come with the lock nuts and pivot *****. Here is the discription on Crane's website:
Die-Formed Steel
Stock design with better material and heat treat. Many supplied with long slot or extra long slot to provide more travel for increased valve lift. Economically priced for budget engine rebuild.
Die-Formed Steel
Stock design with better material and heat treat. Many supplied with long slot or extra long slot to provide more travel for increased valve lift. Economically priced for budget engine rebuild.
Last edited by 355SS; Dec 29, 2006 at 02:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
Mar 8, 2019 12:21 PM