Wheels done... what a PITA
Thread Starter
Supreme Member
Joined: Aug 2004
Posts: 4,168
Likes: 3
From: Marietta, GA
Car: '91 Firebird Convertible
Engine: 305 TBI (LO3)
Transmission: 700r4, Vette Servo
Axle/Gears: 3.27 9 Bolt, PBR disks
Wheels done... what a PITA
Well, I got the new wheels and tires from a TGO member in Newark (Thanks PHAT89TA!) and rode them for a while in the silver. After discussing it with some body shops and members on this forum, I decided to take on the project of going back to the original color scheme of red/gold. This required the following materials:
Not pictured were 11 of the other Blue Boar Ales, a whole roll of masking tape, and the pain in my back jacking up the car with the stock jack and pulling all four wheels.
Anyway, I found a couple helpful threads and gents on the "Detailing" forum who had done this in the past so I took their advice.
Primer:
Spray (multiple, thin coats):
Clear coat. Reinstall. Lather, rinse, repeat 4 times. Took 2 weeks mainly because I wanted even application and uniform drying.
BEFORE:
AFTER:
I'm done for a little while now. One thing I found out is that my spare tire is for crap now. I need a replacement. Is the junkyard my best bet for this? Oh, I also found a leak in my passenger's side rear drum. Brake fluid leaking when the e-brake remains engaged overnight. The list of fixits is never cached.
Not pictured were 11 of the other Blue Boar Ales, a whole roll of masking tape, and the pain in my back jacking up the car with the stock jack and pulling all four wheels.
Anyway, I found a couple helpful threads and gents on the "Detailing" forum who had done this in the past so I took their advice.
Primer:
Spray (multiple, thin coats):
Clear coat. Reinstall. Lather, rinse, repeat 4 times. Took 2 weeks mainly because I wanted even application and uniform drying.
BEFORE:
AFTER:
I'm done for a little while now. One thing I found out is that my spare tire is for crap now. I need a replacement. Is the junkyard my best bet for this? Oh, I also found a leak in my passenger's side rear drum. Brake fluid leaking when the e-brake remains engaged overnight. The list of fixits is never cached.
Supreme Member
Joined: Jun 2001
Posts: 1,509
Likes: 0
From: Newark, Ca, USA
Car: 02 ws-6
Engine: 5.7 liter
Transmission: t56
Looking good mike. I Bought some trans am rims from the junk yard for 100 bucks and slap those on my car. Those rims are painted silver so i need to strip the paint and get the wheels polished. Bty my car is on sale now. Im gonna get my 4th gen in a couple of days
. My friend jason is selling those 15 inch rims and tires that were on my car temporary. i believe they were on my car at the time u came over my house. The tires are 225/60/15 and have 85% thread on them. Rims are not bent and the tires are fully balanced. He's asking around 200 bucks but i think he would neg.
. My friend jason is selling those 15 inch rims and tires that were on my car temporary. i believe they were on my car at the time u came over my house. The tires are 225/60/15 and have 85% thread on them. Rims are not bent and the tires are fully balanced. He's asking around 200 bucks but i think he would neg. Last edited by PHAT89TA; Sep 1, 2005 at 09:31 AM.
Supreme Member
iTrader: (2)
Joined: Jan 2005
Posts: 3,058
Likes: 0
From: 707
Car: '92 Z03
Engine: LSX
Transmission: M12
Lookin' good Caddy!
I've got a spare in good condition + all the accesiories. It was removed from my Black Beast in favor of a 1LE aluminum spare.
PM me if you want it.
I've got a spare in good condition + all the accesiories. It was removed from my Black Beast in favor of a 1LE aluminum spare.
PM me if you want it.
Supreme Member
iTrader: (2)
Joined: Jul 2003
Posts: 3,205
Likes: 0
From: Dallas, TX area
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
Definitely a great paint job, Caddy!!!! My Professional Grade Rustoleum wheels are still holding up fine (gloss black on mine), think I talked to you about doing this earlier. Been a little over 1 year on mine, close to 18 months I think. I've got two more to do this weekend, going to fronts on all four corners on my 'Bird. At least until I can see how good/bad it looks LOL
Trending Topics
Thread Starter
Supreme Member
Joined: Aug 2004
Posts: 4,168
Likes: 3
From: Marietta, GA
Car: '91 Firebird Convertible
Engine: 305 TBI (LO3)
Transmission: 700r4, Vette Servo
Axle/Gears: 3.27 9 Bolt, PBR disks
Originally posted by vernw
Definitely a great paint job, Caddy!!!! My Professional Grade Rustoleum wheels are still holding up fine (gloss black on mine), think I talked to you about doing this earlier. Been a little over 1 year on mine, close to 18 months I think. I've got two more to do this weekend, going to fronts on all four corners on my 'Bird. At least until I can see how good/bad it looks LOL
Definitely a great paint job, Caddy!!!! My Professional Grade Rustoleum wheels are still holding up fine (gloss black on mine), think I talked to you about doing this earlier. Been a little over 1 year on mine, close to 18 months I think. I've got two more to do this weekend, going to fronts on all four corners on my 'Bird. At least until I can see how good/bad it looks LOL
How do your wheels wash? Simple sponge and water work fine?
Vin... you have a PM.
Last edited by Cadillac; Aug 31, 2005 at 11:25 AM.
Supreme Member
iTrader: (2)
Joined: Jul 2003
Posts: 3,205
Likes: 0
From: Dallas, TX area
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
Yep, That's all it takes. Didn't even cleat coat mine.
Supreme Member
iTrader: (3)
Joined: May 2004
Posts: 2,233
Likes: 4
From: stockton, CA
Car: Camaro RS/SS
Engine: 5.7 LS1
Transmission: 4L60E Transgo shift kit, 3500 stall
Axle/Gears: 4th Gen Rear 3:42
Man cadillac, you did a hecka good job on those rims bro. WOW. They do look alot better with that gold color. you should open up a little shop and paint rims.
car is looking great, take baby steps and you'll be fine.
car is looking great, take baby steps and you'll be fine.Joined: May 2001
Posts: 5,244
Likes: 14
From: Sac, CA
Car: '89 GTA
Axle/Gears: 3.27/9-bolt
Well done Mike,
I like the silver rims by nature, but I guess they aren't a good fit on your car.
Like we spoke about at the gtg, the top/caps/emblems accent the gold rims nicely, so you made a good choice.
Is the bird emblem on the gas tank factory? I didn't notice that before.
Time to put a few bucks into some mods I think! Nothing crazy, just for some more pep!
I like the silver rims by nature, but I guess they aren't a good fit on your car.
Like we spoke about at the gtg, the top/caps/emblems accent the gold rims nicely, so you made a good choice.
Is the bird emblem on the gas tank factory? I didn't notice that before.
Time to put a few bucks into some mods I think! Nothing crazy, just for some more pep!
Thread Starter
Supreme Member
Joined: Aug 2004
Posts: 4,168
Likes: 3
From: Marietta, GA
Car: '91 Firebird Convertible
Engine: 305 TBI (LO3)
Transmission: 700r4, Vette Servo
Axle/Gears: 3.27 9 Bolt, PBR disks
Originally posted by OUTATIME GTA
Well done Mike,
I like the silver rims by nature, but I guess they aren't a good fit on your car.
Like we spoke about at the gtg, the top/caps/emblems accent the gold rims nicely, so you made a good choice.
Is the bird emblem on the gas tank factory? I didn't notice that before.
Time to put a few bucks into some mods I think! Nothing crazy, just for some more pep!
Well done Mike,
I like the silver rims by nature, but I guess they aren't a good fit on your car.
Like we spoke about at the gtg, the top/caps/emblems accent the gold rims nicely, so you made a good choice.
Is the bird emblem on the gas tank factory? I didn't notice that before.
Time to put a few bucks into some mods I think! Nothing crazy, just for some more pep!
~shrug~
As for some mods, I'd love a TPI but my tranny wouldn't handle it and with gas the way it is now, I am enjoying what the TBI offers on that front.
Thread
Thread Starter
Forum
Replies
Last Post
drptop70ss
Engine/Drivetrain/Suspension Wanted
3
Oct 4, 2015 09:44 PM
punkmaster98
Interior Parts for Sale
0
Sep 8, 2015 09:45 PM





