I have a couple things left from my gta that im trying to get rid off, for the exterior i have

An aftermarket fiberglass aerowing thats primed black and needs to be painted for 300

A bright red gta hood with grill inserts which has minor scraches from sitting around for for 75 but shipping might be difficult so i prefer pickup

4 Faulken ziex 245/50zr16 tires of which 2 are really good at 2 are just ok for 20 a tire

An aftermarket front bumper cover thats also primed black and ready to paint that has a scrape on the bottom edge for 75

Rear bumper cover painted bright red thats in good shape for 50

2 gold honeycomb rims that are the shallow dish and not deep in good condition for 50 a rim

complete ground effects kit in good condition except for the underside of the front pass side which was ripped on the bottom but sewed with metal stiches but you cant see when on the car for 50

3 wheel caps that are black with silver bird for 20

Set of headlights with working lights and motors for 30 a peice

If you wanna check shipping im using ups unless its the hood the it needs to be freight

 

t

 

h

 

PM sent.

 

Interested in Hood ... PM sent

 

I will take the headlights and motors(if they are good) for 60. lemme know how you want payment.

Thanks bojevans@hotmail.com

 

HELLO?

 

I need a rear rim. I would pay $65 shipped to Detroit. If you still have those rims.

 

Do you have any pics of the hood?

 

bump

 

What part of PA?
If it's close to Pittsburgh I could pick up.

 

If the rear wing is the same as a 1989 GTA than I am interested. Where are you located??

 

very interested in wing, dibs after GNTTA, the wing will fit an 1988 GTA correct?

 

If the "shallow dish" wheels mean they are fronts, Im interested. shipping to 48101

 

People generally refer to the dish on the outside of the rims which would make them the rears I am guessing.

 

If my memory serves me correctly, the shallow are fronts and rears are deep(due to off set)
what would they be shipped to 48101?

 

89ROCDROPTOP, yes offset is the reason for the difference, but in reverse of what you are thinking. You would think that the deeper dish would be on the rear, so just to be sure I went out and looked at a set as they are marked on the backside as front or rear. Looking at the dish from the outside of the rim, the deeper dish is marked front. Fronts can be installed on the rear, but rears cannot be installed on the front because the inside of the rim will rub. This is why everyone wants 2 sets of fronts so that the offsets will match visually.

 

VERY interested in the HOOD, SPOILER, AND HEADLIGHTS and possibly the bumper cover...!!! Sending you a PM!!!

J.

 

how many wheels are left?

 

If you still have the headlights and motors/ e-mail me. Columbus,Ohio.