let me know what parts you are looking for. if i reply, then i have something if not then you know that i wont be able to help you out. i will reply within 1 to 2 days at the most. i check my emails daily.

give me your zip and an email address if you want pics so that if and when i reply it will cut down on a few emails.

 

im lookin for the side ground effects. specifically the 90 and up ground effects. if you have them how much do you want for them?

 

need the '92 front gfx in good shape

 

I own a red 91 and 92 GTA that I am currently trying to find restoration parts for. I own a 82-92 Camaro parts manual as well as a 82-92 Firebird parts book so I have done a lot of research to verify parts. For small items like bolts and screws, I am willing to pay a lot more than what they are worth if you have the correct items. Here is a listing of parts that I need for these cars:

1. factory bolt that secures the tire inflator to the spare tire - 1987 - 1992 Camaro's and Firebirds with N64 RPO code (aluminum spare) - must be in good condition

2. factory bolt that secures the jack to the car in hatch - 1987 - 1992 Camaro's and Firebirds - must be in good condition

3. factory wingnut that secures the spare to to the car in the hatch - 1982 - 1992 Camaro's and Firebirds - must be in good condition
Here is a picture of the setup for my 91 GTA (I am missing the above 3 pieces for my 92 GTA):



4. 2 factory 4 x 6s - 1990-92 Camaro's and Firebirds - must be in good shape and sound fine

5. 2 factory 6 x 9s with - 1990-92 Camaro's and Firebirds with U62 RPO code - must be in good shape and sound fine

6. 4 bolts that hold radio in radio pod - 1990 - 92 Camaro's and Firebirds

7. mint beige driver side door sill plastic - 1992 Camaro's and Firebirds only (one year only color)

8. 2 factory screws for driver side kick panel - 1991-92 Camaro's and Firebirds

9. factory clamps for lower & upper radiator hoses in good condition - 1987 - 1992 TPI/TBI Camaro's and Firebirds



10. plastic clip on driver side of plenum for throttle cables in good shape - 1985 - 1992 TPI Camaro's and Firebirds

Let me know. Thanks.

Andy

 

do you have a passkey box and igniton key with vat in it? for the 89

 

I need a head light rod & **** and the cig lighter housing and a third brake light for a 92.

 

Need a newer style hatch pull down motor from a 91-92 Camaro. Also rad.& condenser lower rubber gromets that sit in the rad support. Zip is 07424.

Thanks Frank

 

Need the hood latch support for my 91 Z. The piece the latch bolts to then the bottom of this piece bolts on down by the radiator. How much with shipping to 45431? Thanks

 

Do you have a MINT condition 90-92 automatic shiftplate?

 

i need the hatch pull down assembly for a 89. does yours work?

 

Looking for black t-top/convertible sun visors in good to excellent shape.

Looking for a 90-92 (yellow letters) shift plate in good to mint shape.

Looking for 90-92 16" 5-star wheels in good shape. If you have any pics please email them to at camaroguy@hardwayracing.com Thanks.

 

I have done business with nksp89irocz, and seen his parts. he will tell you just what it is. GREAT GUY GOOD PARTS

 

Do you have a rear bumper support? the metal peice that bolts to the frame rails, need a rust free one.

price plus shipping to 74006

Thanks,
Richard.

 

Got any t-tops?

 

im still waiting for a response

 

How about left and right side door moldings. The black plastic piece that attaches to the top of the door panel and acts as a seal on the inside of the window. Price for left and right shipped to 98277.

 

+1 on that. Needed a bracket from him, shipped in Sat, and I got it today, Mon. Thanks

 

do you have a set of fog lights, with mounting brackets?

 

I have a 92 RS and the hood lifts are shot they cost 15 each new, wht kind of deal can you give me on them?
----------I live in NC how much for shipping?

 

wanted 91 or 92 camaro front chin spoiler.

jonesrandc@shaw.ca

Vancouver BC, Canada, V5A 2Y1

hope to hear from you soon

thanks

 

You8 got a high Rise spoiler from 91-92 Z28?

 

Do you have the rear bumper support? Mine was rusted and thrown away by previous owners. I have the bumper cover, I just need the part that bolts to the body to support the cover. Chris

 

would you BY any chance have 2 88-90 front iroc rims

 

If he doesn't, i have two, 15" though.

 

sorry, i don't have any front rims or rear either. thanks.

 

sorry i have the 16" but thanks for the offer