-2 Front and 2 Rear GTA's All need refinishing, one is slightly differant. The lip is thinner on it then the others. No major rash, some small marks. SOLD

-LT1 cam, 100K roughly SOLD

-TH200 Driveshaft $40

-Moroso 6qt Pan Hi Vol. picup screen, was never ran in engine, ground a tiny bit off where it goes into the pump casue it wasnt even close to fitting into the melling pump, still fits snug now not loose $25

-882 1.94/1.5 heads, complete, were redone but sat for years should redo them, good heads to redo or experiment with $50

Parts are in lower DE. Looking to move them out.

 

Heres Pics:

http://s144.photobucket.com/albums/r...Picture004.jpg

http://s144.photobucket.com/albums/r...Picture003.jpg

http://s144.photobucket.com/albums/r...Picture002.jpg

http://s144.photobucket.com/albums/r...Picture001.jpg

http://s144.photobucket.com/albums/r...Picture006.jpg

http://s144.photobucket.com/albums/r...nt=Picture.jpg

http://s144.photobucket.com/albums/r...Picture007.jpg

http://s144.photobucket.com/albums/r...Picture008.jpg

http://s144.photobucket.com/albums/r...Picture009.jpg

Pic 001 is driveshaft, pics 002-006 are the wheels, pic is cam, pic 007-008 are heads, and pic 009 is pickup

 

pm sent

 

To The Top

 

Will you ship the driveshaft and was it out of a camaro? If so how much to ship to 28574.

 

-82 TH200 (For Short Tail Th350) Driveshaft $40

-82 TH350 (For Long Tail Th350) Driveshaft $40

-Moroso 6qt Pan Hi Vol. picup screen, was never ran in engine, ground a tiny bit off where it goes into the pump casue it wasnt even close to fitting into the melling pump, still fits snug now not loose $25

-Alpine Type S 6x9's $50

Updated List.

 

I can still use that TH-200 d/s. Is that complete from end to end?

 

Yeah