Hooker Headers, TPI intake, new 383 pistons, more!
Thread Starter
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Hooker Headers, TPI intake, new 383 pistons, more!
I have a lot of parts from my 89 Camaro IROC-Z for sale. I have pictures of everything. Parts must go, I have to make room for the rear end so feel free to make offers.
Hooker 2055 headers and y-pipe with AIR tubes, JetHot coated $425 ($779 new from JetHot)
TPI intake manifold and associated parts:
-Throttle body
-Adjustable fuel pressure regulator
-Fuel lines
-Water Neck and thermostat
Brand new Mahle PowerPak pistons, SBC125030F05, for 383 stroker with 6" rods, $615 from Summit, asking $495
19lb/hr injectors
Various climate control parts including condenser, evaporator assembly with switches, wiring, blower motor, resistor, controls (All climate control has been removed from the car)
All cruise control related items
Windshield washer reservoir and pump
Stock crankshaft, pistons, rods (104k miles- L98 motor)
AutoMeter Phantom Air/Fuel indicator gauge, 2 1/16"- $25
Starter- $10
Water pump- $10
Plastic gauge bezel trim piece
Valve covers- good shape- $25
Stock lifter guide plates
Stock rocker arms
Chrome water neck with bolt head covers- never used- $8
Stainless upper radiator hose kit with adapters- never used- $40
Two (2) Accel coils
AIR Pump and hoses
Stock 153-tooth flexplate
Brand new Hypertech 176/166 fan switch- never used- $35
OEM Fan switch and thermostat- never used
Parts located in Palos Hills, IL
Hooker 2055 headers and y-pipe with AIR tubes, JetHot coated $425 ($779 new from JetHot)
TPI intake manifold and associated parts:
-Throttle body
-Adjustable fuel pressure regulator
-Fuel lines
-Water Neck and thermostat
Brand new Mahle PowerPak pistons, SBC125030F05, for 383 stroker with 6" rods, $615 from Summit, asking $495
19lb/hr injectors
Various climate control parts including condenser, evaporator assembly with switches, wiring, blower motor, resistor, controls (All climate control has been removed from the car)
All cruise control related items
Windshield washer reservoir and pump
Stock crankshaft, pistons, rods (104k miles- L98 motor)
AutoMeter Phantom Air/Fuel indicator gauge, 2 1/16"- $25
Starter- $10
Water pump- $10
Plastic gauge bezel trim piece
Valve covers- good shape- $25
Stock lifter guide plates
Stock rocker arms
Chrome water neck with bolt head covers- never used- $8
Stainless upper radiator hose kit with adapters- never used- $40
Two (2) Accel coils
AIR Pump and hoses
Stock 153-tooth flexplate
Brand new Hypertech 176/166 fan switch- never used- $35
OEM Fan switch and thermostat- never used
Parts located in Palos Hills, IL
Thread Starter
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Re: Hooker Headers, TPI intake, new 383 pistons, more!
The throttle body is stock, I sold my 52mm Holley with the LT1 intake already.
Junior Member
Joined: May 2004
Posts: 65
Likes: 0
From: Tyler, TX
Car: 92 Heritage T-Top
Engine: 350
Transmission: 5-Speed
Re: Hooker Headers, TPI intake, new 383 pistons, more!
How complete is the intake, I.E. does it have sensors, runners, etc. and is it speed density?
How much for the intake, injectors, and headers shipped to 75707
How much for the intake, injectors, and headers shipped to 75707
Thread Starter
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Re: Hooker Headers, TPI intake, new 383 pistons, more!
Attached is a picture of the intake, not pictured is the fuel rail. It is a MAF setup from my 89 IROC. No sensors are included though I think I have an extra IAC and IAT sensor around here somewhere.
The shipping for the headers will be around $55, I haven't weighed the intake but I'd guess around $20-$25.
The shipping for the headers will be around $55, I haven't weighed the intake but I'd guess around $20-$25.
Supreme Member
iTrader: (20)
Joined: Aug 2007
Posts: 1,111
Likes: 1
From: chicago
Car: 87 GTA
Engine: 385 sbc
Transmission: 700r4
Axle/Gears: 2.73 posi
Re: Hooker Headers, TPI intake, new 383 pistons, more!
Just installed my trans last weekend with that stall converter I bought from ya, makes a huge difference on my 305tpi. Hes a good guy to deal with... Later.
Junior Member
Joined: Jan 2007
Posts: 18
Likes: 0
From: Colo.
Car: 91 Formula ex-1/4 mi. car
Engine: LS1/LS6 SLP maf K&N cai 3" exh
Transmission: built 700R4 w/ 10" HUGHES 3300stall
Axle/Gears: MOSER AXLES, 3.73 w/ posi
Re: Hooker Headers, TPI intake, new 383 pistons, more!
HEY,
IS THE STAINLESS HOSE KIT SILL UP FOR GRABS? & IF SO HOW LONG IS IT & IS IT THE "COOL HOSE" FROM SUMMIT? CAN YOU SEND PIX OF THE HOSE & H2O NECK?
IF ITS 36" OR LONGER ILL TAKE IT!
IS THE STAINLESS HOSE KIT SILL UP FOR GRABS? & IF SO HOW LONG IS IT & IS IT THE "COOL HOSE" FROM SUMMIT? CAN YOU SEND PIX OF THE HOSE & H2O NECK?
IF ITS 36" OR LONGER ILL TAKE IT!
Trending Topics
Junior Member
Joined: Jan 2007
Posts: 18
Likes: 0
From: Colo.
Car: 91 Formula ex-1/4 mi. car
Engine: LS1/LS6 SLP maf K&N cai 3" exh
Transmission: built 700R4 w/ 10" HUGHES 3300stall
Axle/Gears: MOSER AXLES, 3.73 w/ posi
Re: Hooker Headers, TPI intake, new 383 pistons, more!
HEY, I DONT KNOW IF MY LAST REPLY GOT POSTED OR NOT BUT
DO YOU STILL HAVE THE S.S. HOSE KIT? IF SO CAN YOU SEND ME SOME PIX OF THAT & THE H2O NECK? WHATS THE LENGTH OF THE HOSE?
DO YOU STILL HAVE THE S.S. HOSE KIT? IF SO CAN YOU SEND ME SOME PIX OF THAT & THE H2O NECK? WHATS THE LENGTH OF THE HOSE?
Thread Starter
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Re: Hooker Headers, TPI intake, new 383 pistons, more!
I will check the length tomorrow but I believe it is 30", here is a pic:
Last edited by MetalliCamaroRS; Feb 28, 2008 at 08:05 PM.
Supreme Member
iTrader: (3)
Joined: May 2005
Posts: 1,942
Likes: 0
From: Southern IL
Car: 88 GTA "Cocaine"
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: 3.27
Re: Hooker Headers, TPI intake, new 383 pistons, more!
pm sent
if deal goes well I might just get that tpi setup
if deal goes well I might just get that tpi setup
Joined: Dec 2004
Posts: 1,132
Likes: 24
From: Midwest
Car: '82 Recaro T/A, '71 Trans Am
Engine: 305CFI/455HO
Transmission: TH700R4/M22
Axle/Gears: 3.23/3.42
Re: Hooker Headers, TPI intake, new 383 pistons, more!
Do you have the black plastic vacuum lines that go from the charcoal canister to the throttle body?
Member
Joined: Jan 2006
Posts: 199
Likes: 0
From: Poland, Europe
Car: Firebird 88
Engine: 406
Transmission: th400
Axle/Gears: 3.50
Re: Hooker Headers, TPI intake, new 383 pistons, more!
Hookers are sold? If not any pictures to bialooki@wp.pl ..?
Thread Starter
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Re: Hooker Headers, TPI intake, new 383 pistons, more!
Hookers are sold? If not any pictures to bialooki@wp.pl ..?
Senior Member
iTrader: (1)
Joined: Apr 2006
Posts: 562
Likes: 0
From: south Louisiana
Car: 1985 Z28
Engine: 85 L98
Transmission: 700r4
Axle/Gears: stock 10 bolt-3.73 eaten posi
Re: Hooker Headers, TPI intake, new 383 pistons, more!
any pics on the headers? and is that $425 firm?
Member
iTrader: (1)
Joined: Jan 2005
Posts: 317
Likes: 0
From: willow grove, PA
Car: 1992 Camaro vert
Engine: 355
Transmission: 700r4
Axle/Gears: 10 bolt... not blow up yet
Re: Hooker Headers, TPI intake, new 383 pistons, more!
interested in the headers, would ya take 400 shipped?
Thread Starter
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Re: Hooker Headers, TPI intake, new 383 pistons, more!
Generally shipping on the headers is about $60 to the US.
Anyone who wants pics, provide an email address, I have plenty.
Anyone who wants pics, provide an email address, I have plenty.
Senior Member
iTrader: (2)
Joined: Feb 2004
Posts: 697
Likes: 1
From: Kalamazoo
Car: 89 iroc
Engine: 355 TPI FINALLY
Transmission: 700r4/ SHIFT KIT
Axle/Gears: 3.42
Re: Hooker Headers, TPI intake, new 383 pistons, more!
need the cruise control cable please
ship to 49017 michigan
ship to 49017 michigan
Thread Starter
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Re: Hooker Headers, TPI intake, new 383 pistons, more!
Water neck, radiator hose kit and fan switch sold.
Senior Member
iTrader: (5)
Joined: Nov 2007
Posts: 529
Likes: 0
From: Rapid City, SD
Car: '83 z/28
Engine: 305
Transmission: T5
Axle/Gears: Stock?
Re: Hooker Headers, TPI intake, new 383 pistons, more!
Thread Starter
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Re: Hooker Headers, TPI intake, new 383 pistons, more!
The regulator is already on the fuel rail, I'd rather keep it on there since I don't have the old regulator. You'd need a tamperproof torx socket to install it, as that is the bolts it has. If you're really interested how does $30 shipped sound? Here is a pic:
Thread Starter
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Re: Hooker Headers, TPI intake, new 383 pistons, more!
Headers, washer fluid reservoir and washer pump sold.
Thread Starter
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Re: Hooker Headers, TPI intake, new 383 pistons, more!
$425 shipped to the US for the pistons anyone?
Member
iTrader: (8)
Joined: Mar 2007
Posts: 343
Likes: 1
From: Shreveport Louisianna Barksdale AFB
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: Hooker Headers, TPI intake, new 383 pistons, more!
Stock water pump? Drilled out for alt bracket and power steering bracket?
Thread Starter
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Re: Hooker Headers, TPI intake, new 383 pistons, more!
Yes, it is stock. If you'd like to provide an email address I will send you a picture of it.
Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
NW Indiana and South Chicago Suburb
14
Jan 31, 2025 05:10 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM
