http://flickr.com/photos/18390448@N0...n/photostream/
here is the link to pics and prices. all prices are + shipping

 

ttt no one wants the headers on here?

 

how much for torque arm.

 

Does the heater control leak? How do you get it out? Mine is stuck back there. I have the console around it off but don't know where to remove the lines as mine leaks. If you can tell me how to get mine out and I don't just have a loose connection I'm interested. Also, do you have a fog light switch?

PM me if so.

 

would does fit on a stock Y pipe?..what are the measurements please...

 

torque arm is part of a trade Monday. no fog light switch for the heater control there is 4 self tap head bolts that take it loose then 2 small bolts that hold the vacuum hose holder on.

 

how much for the headers and does it have a y pipe or will a stock one fit. Shipped to 24333

 

prices are under the pics $75 and shipping these are long tubes. so you could either get a custom y made but the norm is true dual exhaust. Monday all this stuff goes to Ebay if it isn't spoken for.

 

I'll take the lighter and the heater control. Paypal OK?

 

i'll take the headers whats shipping to pa 18235 email me boosted94ex@aim.com

 

yeah paypal is fine let me get shipping for you guys. the lighter and heater control shouldn't be and more than $5 or whatever priority mail is now. the headers I will measure and weigh tomorrow some time.

 

OK, let me know on the lighter and heater control and I'll PayPal ya (will need your PayPal email address. My email is jv9999atyahoo.com

 

if the headers dont sell. what is the part number for them? and how much shipped to 68123?

 

the heater control and lighter shipping is $5.65 with delivery confirmation

the headers I didn't get a chance to check as I don't have them boxed yet I would say $25 through UPS I am only charging actual shipping on this stuff.

once this stuff is paid for I am going to delete the pics so that way it might make it a little easier.

 

Still need an email address so I can PayPal you.

 

I e-mailed you but to let everyone else that is interested in anything my paypal address is droptop406@sbcglobal.net on the headers no one has paid yet so first one to pay get them. I need to clear out some room. The headers I'll do $100 shipped anywhere in the 48 states. after you pay make sure to post on here so I don't get two or more payments. These are Hedman long tubes the part # is 68460

 

did the headers fit the car well?or do you have to fab alot?

 

do you still have 700r4 manual? is it for early or late 80's?

 

headers fit perfect didn't have to fab anything, i saw one was 83 and one was 85 not sure on the other two. they are definitely helpful.

 

Payment for headers sent.

 

how much for the chrome irocs

 

if you are talking about the rims. Those are the set on my car now that I am polishing. I am looking for the 02 Camaro SS 10 spoke rims. I would trade even up for those otherwise after I get them all the way finished. I was thinking $450 with good tires on them. The tires are kind of old but look like they would be good to use. (they have been stored inside most of the time)

 

ttt

 

Just wondering if you shipped the lighter and heater control yet?

 

yeah sorry about that I didn't get a chance to get them out until this morning. I am pm'ing the tracking info on them now.

 

here is a new link with all that I have left.



http://flickr.com/photos/18390448@N0...th/2846325904/

 

nevermind saw that it was a serp belt set-up

the vbelt setup, does it have everything that you will need to swap a serp belt setup to v belt? if not, what else will be needed?

 

I am pretty sure it is everything all that stuff has been sitting in the attic for a while but I don't remember anything missing. I might and I stress might have all the bolts too it too. I will have to check. I am not sure if you can use the serp setup power steering pump so you may need the one that I have. $85 shipped for all the brackets pulleys and the power steering pump.

 

the pulleys and brackets-are they v-belt or serp belt set-up?

 

It's all the v belt stuff from an 87 Iroc.

 

header are sold right?

 

yep already sold and sent sorry feel free to check out the rest of the stuff I got though.

 

what all does it come with? like what are the pulleys for that you have?

 

there are a couple people interested in that stuff so first one to pay gets them. It comes with the bracketry for all of it and all the pulleys other than the alternator pulley. I also have an alternator with the pulley on it but it needs checked out at carquest or someplace else that rebuilds them.