First let me say that I absolutely hate having to do this. However after finally getting everything ready to put my car together I find out that my wife can no longer work so guess what the first thing to go is. Anyway enough with the sob story. I tried to sell it as a complete package and had no offers so I figured I would just part it. If it says new next to it is still in the boxes and has not even been installed. All prices are plus shipping.



I have a 1987 camaro project. The camaro body is an LT v6 body. The body is super clean just needs paint and the interior is in excellent condition. the interior is black. It does need a new headliner and the dash pad is cracked. It has manual windows and locks. It does have the power hatch. It also comes with a set of 1992 Z28 rims,145 mph speedometer, 1992 Z28 taillights, grant leather steering wheel and a 3" cowl pin-on hood. I will take $650 for it.

I have a 350 4-bolt main block bored .40 over, line bored,decked, new freeze plugs and new cam bearings. The #1 cylinder had a small crack in it and I had it sleeved. This is still at the machine shop and I will be picking it up this week. I have $500 in receipts for this block and crank. I will take $400 for it.

Keith Black Hypereutectic pistons and
Stage 3 rods from Jasper Performance $150
New ARP Head Bolts $45
Holley 750 double pumper $100
comp cams 295H cam $50
New comp cams lifters $45
New comp cams .100 magnum pushrods $75
New Jegs gear drive $85
World Products Sportsman II heads 2.02 / 1.6 64cc Comp Cams double valve springs installed $600
New Scorpion Split ratio aluminum roller rockers 1.5/1.6 $175
New fabricated and polished tall aluminum valve covers $75
New Aluminum breathers for valve covers $25
New max air air cleaner $75
Msd 6al box with 6000 rpm pill $125
New MSD billet distributor $185
New MSD blaster 2 coil with New MSD Coil bracket $35
New direct fit Aluminum Radiator $150
New Eibach Performance Springs $150
Complete WC T5 5spd swap $550
New Pro 5.0 shifter $150
New NOS powershot 125hp for carb $250
Stainless radiator hose $25
New 2 single chamber Flowmaster race series mufflers $125 for the set
1992 Z28 rear spoiler $100
New Hooker Competition Series Shorty Headers $125
I can take pics upon request.

 

where are you located?

 

I am located near Knoxville TN.

 

sorry to hear you have to part it out, i'd never wish that on anyone.

im interested in the following:

Msd 6al box with 6000 rpm pill $125 - i assume its not new, how long has it been used and in what (pic?)
New direct fit Aluminum Radiator $150 -brand?
New Eibach Performance Springs $150 which ones? or are the called "perfomance spings" be eibach?
Stainless radiator hose $25 - again used? (pic?)

thanks, alex

 

Can you give me some information on the pushrods? What length are they? Because there are two standard pushrods...one for the one piece motor with roller lifters and one with flat-tappet lifters.

 

The pushrods were bought for a hydralic cam here is the info from Jegs.
Comp Cams 7693-16 - Small Block Chevy SB-Chevy 5/16 .100 Small Block Chevy Item# 249-7693-16 Only $93.99

 

Here is the only info I have on the radiator. This is a brand new high performance
2 row all aluminum radiator

"this radiator provides 20% to 30%
more cooling capacity
than a 3 or 4 rows standard radiator"Good for Both Automatic & Manual Transmission
----------
Here is the Eibach info.
Eibach #369-3801.140
Pro-Kit Lowering Springs
1982-92 Camaro/Firebird V8 (1" drop)
I bought the MSD Box from another forum member. I do not know how long he used it but it looks like it is in really good shape.
I will get you some pics tonight if you pm me youor email address.

 

Holley DP 750 - Do you have model or part#
MSD Dist - Part#

 

Here is the info for the distributor. I will have to get the carb numbers tonight when I get home.

MSD 85551 - Chevy Pro-Billet Distributor Chevy V8 Chevy Item# 121-85551 Only $253.99

 

I had forgotten to list my headers. They are now in the ad.

 

interested in msd dist. and double pumper... does the holley have manual secondarys? also, shipping to 46221 on those?

 

Also interested in the Eibach Springs, but are they the Pro Kit or the Sportlines?
Thanks

 

Do you still have the tranny? if so are you willing to ship to 11040?

 

interested in headers.whats part #..I have paypal if you take it...I am very serious..P.S..I'm in jackson TN...where are you at?pix would be great...and do you have a Y pipe for them?

 

Yes the double pumper carb is manual secondaries not vaccum.
----------
the Eibach Springs are the Pro Kit.

 

Are the spring new? Can you send pics? You have a PM. I would like to be next in line for the springs.

 

Are the valve covers perimeter or centerbolt? when you say wc complete swap, could you run down the parts list, please?

Thank you!

 

Please click one of the Quick Reply icons in the posts above to activate Quick Reply.

 

Sent pm's and I think I answered all questions. If not let me know.

 

r the headers still for sale

 

Headers are still for sale

Transmission swap sale pending!

 

send pics of headers to drags33@verizon.net thanks

 

I'm still interested in the carb. Just need to know the numbers as requested in the PM.

 

i need coil asap.. will you ship to 29745 york sc?

 

oh, i also would like to know if you will sale the wheels and speedo..and the hood?? let me know..
thanks

 

I will get you a shipping quote tomorrow. I hate to start parting the car because it is in really good shape. If I don't sale it by the middle of next week I will consider parting it and you will be first on the parts you asked about.

 

What about the springs? You said they were boxed up?

 

All Msd parts are sold.
I have a sale pending on the t5 swap.
I also have a sale pending on the spiings. Someone asked about them being boxed up. I was just stating that they are still in the original box and ready to ship. These are the pro kit springs.
Also I ran the numbers on the crab and it is actually a 650 double pumper not a 750.

 

Well what are the numbers. 4777-? or ?

 

are the valve covers centerbolt or perimeter bolt? pics please?

 

Ok guys this stuff has to go. The MSD parts are gone and the tranny and springs are pending.

 

Spoiler worked out great... we mock fitted it to the camaro of my friends and it looks Bad @$$...
All we have to do now is paint it..

Nice to meet you as well...

I meant to ask you about the Grant Steering wheel... what style is it and how much do you want for it..?

Thanks...

 

I have it bolted on to the roller. If I don't sell the roller I will part it out. I will sell you the Grant wheel and the adapter for $65. I paid $105 just for the wheel.

 

Roller is sold! I have had alot of questions don't be afraid to make a realistic offer if you see something that you need.

 

PM sent

 

one more pm sent...you get the money for the headers yet?I sent it last week..let me know bro?

 

pm'ed ya back.

 

I still have some parts left.
New! Nos Powershot 125hp kit for carb setup. $275 shipped to the lower 48
New! 2 Single Chamber Flowmasters $120 Shipped
New! Jeg's Timing Gear Set $85 Shipped
New! Mallory 4 port fuel regulator $70 shipped.

I will check and see what else I have left but I know I still have these items.

 

Im interested in the Keith Black Hypereutectic pistons and
Stage 3 rods from Jasper Performance $150

Would they fit my 350 block bored .60over (its a truck block so its ok)?

 

Sorry they will not fit they are .40 over.

 

what ur location ?

 

you get those headers shipped to me yet?surly you got the money by now...get back with me...Thank You

 

I still haven't received any money for the headers. I will ship them as soon as it arrives. I have received payment for the transmission setup and the springs. Both of those will ship out to their buyers tomorrow.
----------
Did you send it regular mail or priority mail?

 

pics of carb to skynoverya55@aol.com with model number please. thanks!

Also would you happen to have the c100 harness from the firewall forward??

 

I just dropped in the mail..we dont live far from each other.I didn't figure it would take this long.......I'll send you a pm with some info...Thanks

 

What part of TN are you in?

 

West TN...Jackson.....Between memphis and nashville

 

Matt,
Anyword on the springs being shipped?
Thanks
Willie

 

i doubt you will get them. just like i got screwed with my transmission

 

I paid for some headers weeks ago via Money order and he stated he recieved the MO in a pm.I will have to see if the MO has been cashed then try to take action from there I have gotten weak response for him this is the last pm I recieved

Re: headers

--------------------------------------------------------------------------------

Sorry for the delay. I crashed my bike and have been laid up for a few days. I will try to get them shipped out today. Again I apologize for the delay.


If true its cool but I see that I'm not the only delay in shipping....I need a refund or some answers....Thanks and Happy Day..Dave