Doug's 1 3/4" headers with 3" collector, with great fitment, identicle to hooker super comps. Will include Percy's reusable header gaskets as well as header bolts. Normal installation scratches, no dents, some rust starting to show on the bottom but overall still a lot of coating left.

http://www.jegs.com/i/Doug%26%23039%...D3321/10002/-1






3" dual setup with dynomax bullets and edelbrock 304 stainless mufflers with turndowns before the axle. System should clear any Spohn aftermarket crossmember/torque arm setup as that what it was built around. Amazingly my car with prokit never scraped only the header collectors which is the lowest part of this exhaust.






$375 Shipped for the Longtubes, $400 for the rest of the exhaust, NOT including shipping. These mufflers alone cost $160. Will have to work something out with the seller if you want the whole setup. Willing to split.

 

pm sent..

 

im kinda interested. ill pm you later. what eles are you selling ?

 

PMs sent/replied.

 

Pics of these headers installed? Any fitment issues with the steering and/or brake lines? You have an aftermarket K-member and oil pan so it's hard to judge how low these headers will hang on a stock k-member'd 3rdgen.

 

is taht a fuel cell in the rear shot. what kind is it and anyother pics of it in the car.

 

If you dont mind me asking what oil pan is that?

 

Well let me first say Headers are sold, the duals are still available.

No fitment issues with steering linkage. Brake lines i just moved some with my hands(picture was before i moved the lines). Headers hang the same as hooker super comps. You lose some ground clearance wasn't that big of a deal to me. They are tight everywhere else. Spark plug clearance is great i was able to use normal plugs with 90degree boots.







Stock gas tank sumped.

Trans-Dapt 7qt oil pan.

 

How much would you want for the Dual setup? You can PM me the price if you want.

 

i was wondering i havent seen any stock tanks sumped to see if it actually droped below the body line. im thinking thats the route im going to take. im going to buy a new tank then have the sump put in. and have it lined. for e85., thanks man.

 

headers came in thanks..

 

Duals are still for sale, not really wanting to ship. If anyone is interested in the bullets or mufflers i can cut them out and ship them.

Thanks.

 

Hey man how much for just the bullets. Mines not loud enough LOL. Shoot me a IM later

 

pm sent!

 

Bullets sold. Mufflers still for sale.

 

What parts of the duel exhaust do you still have?

 

hit me up Steve, I am interested in the mufflers. IM or email t.bracci@yahoo.com

 

Still have these mufflers, they are ready to be shipped. When cutting off part of the hanger it pulled up a little piece of weld. I'll go $175 shipped on them.

 

Question about your old setup, I have Hooker LTs and a spohn tranny crossmember, both already installed, I was wondering if you had to modifiy the frame at all where you bent it around the tranny crossmember in the 5th picture from the top? I plan on building an exhaust system soon for my car and am still debating on how to do it.
Did the dynomax bullets and edelbrock mufflers with turndowns quiet the car down at all? I am also debating about turndowns vs side exit as I have a sumped tank also.