I'm parting out all of my 305/t5 parts to get ready for my 5.3l LSx swap. Pretty much anything on the engine is fair game. Here's a list of things off the top of my head, I might add more later. Prices do not include shipping.

-305 short block (minus cam), was rebuilt not too long ago. Use it as a boat anchor : $100 (pickup only)
-416 heads with new valve stem seals, pocket porting: $100
-Comp 1.5 roller tip rockers: $75
-Comp XE262H-10 cam (sounds good in a 305): $50
-Edelbrock Performer intake: $25
-Edelbrock 1406 600 cfm electric choke: $175
-Summit 110gph fuel pump with -6 braided lines/AN fittings: $75
-Summit HEI distributor (SUM-850001R): $50
-Summit 8mm plug wires, 90* boot (SUM-868836): $15
-Polished 100 amp v-belt alternator with bracket/turnbuckle: $60
-Power steering pump for v-belts: $25
-V-belt water pump/crank pullies: $20
-Hedman Elite 68478 headers, coated but have a little rust still: $150
-GMPP 15lbs. flywheel 153 tooth, 2 piece rear main seal: $100
-Hays street/strip clutch and pressure plate: $175
-Pro 5.0 shifter with stock and short stick: $150
-WC T5, can get tag number to verify: $250
-T5 bellhousing: $50
-Powermaster XS ministarter with heat shield: $125
-LT1 T56 hydraulics, also work with T5. Bought new from GM: $120
-Fabricated valve covers, never used: $100
-Summit SFI 29.1 flexplate, 2 piece rear main seal: $25
-Any parts you want off of an open 3.08 drum rear
-Box of random T5 parts, would be useful if you need a rebuild: $25
-Front turn signals for '82-'84 bumper: $10
-Side turn signals (fits all models as far as I know): $10
-Non-grid style tail lights: $15

I'm sure I've got other things. I'll have a look around and see what I've got. I'm open to offers on almost everything. I can get pictures if needed. All parts are in good shape unless otherwise noted; most engine/trans parts have less than 150 miles on them.

 

can you pm me a pic of that alternator if you've got one? how much shipped to Toronto, Ontario M2M 1J6? do you take paypal?

also, is the flywheel new? may be interested in that as well.

 

Flywheel isn't new, but it only has about 100-150 miles on it. I can get a picture of the alternator tomorrow, and a picture of the flywheel if you're still interested.

 

Yeah, more so interested in the alternator actually. I put a new flywheel on but it was some baseline replacement one. dont know how heavy it is but I might just stick with it. not made of money lol. anyways, send me a pic of the alternator.

 

I've got some pictures of the stuff I took off today. I'll have more pictures tomorrow.

 

Which Performer intake is it (p/n)?

 

Can you post pic of shortblock? Also what specs on the rebuild? Thanks

 

If the deal falls through on the 350 im sposed to get, i'll be interested in these:
-Comp 1.5 roller tip rockers: $75
-Comp XE262H-10 cam (sounds good in a 305): $50
BTW have any pics?

 

89IROCZ28 -
I'm pretty sure it's part# 2101.

carzwitballz -
I'll be sending you a PM with some pics.

95Cam86Roc -
I can definitely get pics of the rocker arms tomorrow, maybe the cam too if I have time to pull it out.

 

hey, what condition is that clutch setup in? and would you take $175 shipped? Thanks

 

Thanks for the p/n on the intake. Unfortunately, I need one w/ EGR.

Bump for a great buy.

 

Clutch should be in good condition, it only has about 100-150 street miles on it. I'll be pulling it off today and will have pictures tonight. We could possibly meet in Chester if you want to save on shipping.

 

Just wondering if the flywheel and fuel pump are still available and if so the the shipping to connecticut, 06516. thanks.

 

More pictures

 

Even more pictures

 

hey do you happen to have a y pipe and the mid pipe?

 

Yup I've got the Y for the headers. If by mid pipe you mean the I pipe, then no I'm not selling that. I'll PM you some pictures of the Y pipe later today.

Headers are sold. Deal pending on the alternator and distributor.

 

Is the cam & rockers still Available? If so how much shipped to 42262

 

As of right now the cam and rockers are still available.

Here are the rocker arms, cam is still in the engine so no pictures of it.

 

when you get a chance could you let me know how much w/shipping for the both?

 

Bump

Deals pending on the alternator, distributor, flywheel, fuel pump, clutch, and trans.

 

Flywheel and fuel pump are sold

 

PM SENT

 

List updated, lots of good parts still available

 

Another PM sent!

 

Hi Phillip
I'm interested by your "box of ramdom T5 parts. I am in Québec actually. I would like know if you can give me little more information about parts in this "box". Here is my zip code: G5V 1W4. Could you please check what is the cost for shipping.

Thanks in advance. Best regards.

 

Tell me about those heads. Would they be good for a .040 350, with a stock cam? Are they ready to be used, any smoke? Send me pics please, thanks.

Also want the performer intake. A pic would be nice. Thanks

 

sent you a PM!

 

sent you a PM!

 

Hmm?

 

PM sent. Sorry for the delay.

Got some pics of the valve covers, heads, intake, and cam.

 

 

I replied to your pm about the heads. Im also interested in the Intake. Will it accept a stock Rochester 4bbl?

Thanks.

 

I'm not 100% sure, but I think you'd have to use an adapter plate for a Rochester to fit on this intake. I think Rochesters are spread bore and this intake is a square bore.

Possible deals pending on intake, distributor, bellhousing, heads, trans, clutch, box of t5 parts, and tail lights.

 

List updated again.

 

Phillip,
Are there any noticable increases with this cam and rockers. Doesnt seem like its much more than stock?
thanks

 

Carcraft used this cam in a 305 build they did. With a Performer intake, 750cfm carb, and this cam they made 269.8hp@5100rpm/291.1lbs-ft@3600rpm. With Vortec heads they made almost 325hp

Carcraft magazine builds 325 horsepower 305

 

Bump. Whatever isn't sold by the 30th is going on ebay. I would much rather sell to board members though, so let's do some business