Whole bunch of parts - LSx iroc-z partout.
Thread Starter
Supreme Member
iTrader: (1)
Joined: Jun 2006
Posts: 1,067
Likes: 0
From: Guelph, Ontario
Car: 89 IROC/05 RX8
Engine: LS1/LS1
Transmission: T56/T56
Axle/Gears: 3.42 GM/3.55 8.8
Whole bunch of parts - LSx iroc-z partout.
Hey everyone, here's my boatload of parts, all prices are obo, and add shipping.
4L65e Automatic Trans - Freshly rebuilt, mint - Pending
Custom LSx Swap headers - $250 (no Y)
Plug & play thirdgen Wiring harness, w/ DBW pedal, pedal harness, TAC module and throttle body - $500
Air intake for LSx swap, fits LS6 85mm maf, elbow w/ filter - $60
Rad hoses & moded rad for swap - $100
Thirdgen stock K-member w/ mounts welded to it for LS1 clamshells to slip into, notched for extra pan clearance, and fully welded seams - $75
Stock Transmission crossmember with mod for 4L60e/65e to fit - $30
F-body power steering lines for LS1 Swap w/ f-body accessores - $40
F-body Oil pan w/ pickup/windage - Pending
LS1 Rear differential w/o brakes - Pending
LS1 12" Rear disc brakes - Hawks pads, brembo rotors, new calipers, includes backing plates, e-brake parts etc - Pending
LS1 Aluminum Driveshaft - Sold
5.3L Iron block - 20k miles, bare block - $200
LS1 intake - $50
5.3L Pistons w/ rods - 20k miles, coated skirts, mint - $100
LS1 front brakes - New pads, rotors, new bearings, flex lines etc, Flynbye bracket - $550
LS1 Plastic fuel tank w/ conversion fuel lines - $125
Lowering springs $75
iroc-z sway bars $75
H4 Conversion lamps (high and low, High projector) Sold
Clear side markers - Sold
Iroc Grill - $40
Magnaflow catback, stainless, for thirdgen or LT1 4th gen - Sold
All interior peices - Gray
Suede fibreglass headliner/extension/speaker covers - $300
4th gen seats - Dark grey, mint shape no tears - $200
3rd gen power seats - Grey tweed - $100
LT1 4th gen camaro dash/ 6spd console - $200 (HVAC is modified to fit a thirdgen)
Monsoon stereo system - 10 speaker, includes amp, setup to be wired to a thirdgen - $150
T-tops - offer
Doors - Bright red, fresh paint, no rust at all - $150/pair
Fenders - Bright red, fresh paint, 0 rust - offer?
hood - iroc-z hood, prestine, fresh red paint - offer?
Front end - Red, no cracks or damage - offer?
GFX - Pretine, red paint - Offer?
rear bumper - Red, no cracks or damage, red perfect paint - offer?
spoiler - Mint, fresh red paint, no damage or cracks - offers?
hatch - Rust free, no damage, fresh red paint - offers?
RUST FREE SHELL - Mint body, no damage, rust free, t-tops, bright red - $500
Second Shell option - Complete Body, front end, hood, gfx, bumpers, fenders, doors, t-tops hatch, spoiler etc - $1000
All parts are + shipping, if your in the chicago/detroit area, i can get parts there (big or small) for dirt cheap. Can send large parts on a skid via fedex ground.
Pictures avaliable. Car is being completely parted out, only thing im keeping is the engine.
4L65e Automatic Trans - Freshly rebuilt, mint - Pending
Custom LSx Swap headers - $250 (no Y)
Plug & play thirdgen Wiring harness, w/ DBW pedal, pedal harness, TAC module and throttle body - $500
Air intake for LSx swap, fits LS6 85mm maf, elbow w/ filter - $60
Rad hoses & moded rad for swap - $100
Thirdgen stock K-member w/ mounts welded to it for LS1 clamshells to slip into, notched for extra pan clearance, and fully welded seams - $75
Stock Transmission crossmember with mod for 4L60e/65e to fit - $30
F-body power steering lines for LS1 Swap w/ f-body accessores - $40
F-body Oil pan w/ pickup/windage - Pending
LS1 Rear differential w/o brakes - Pending
LS1 12" Rear disc brakes - Hawks pads, brembo rotors, new calipers, includes backing plates, e-brake parts etc - Pending
LS1 Aluminum Driveshaft - Sold
5.3L Iron block - 20k miles, bare block - $200
LS1 intake - $50
5.3L Pistons w/ rods - 20k miles, coated skirts, mint - $100
LS1 front brakes - New pads, rotors, new bearings, flex lines etc, Flynbye bracket - $550
LS1 Plastic fuel tank w/ conversion fuel lines - $125
Lowering springs $75
iroc-z sway bars $75
H4 Conversion lamps (high and low, High projector) Sold
Clear side markers - Sold
Iroc Grill - $40
Magnaflow catback, stainless, for thirdgen or LT1 4th gen - Sold
All interior peices - Gray
Suede fibreglass headliner/extension/speaker covers - $300
4th gen seats - Dark grey, mint shape no tears - $200
3rd gen power seats - Grey tweed - $100
LT1 4th gen camaro dash/ 6spd console - $200 (HVAC is modified to fit a thirdgen)
Monsoon stereo system - 10 speaker, includes amp, setup to be wired to a thirdgen - $150
T-tops - offer
Doors - Bright red, fresh paint, no rust at all - $150/pair
Fenders - Bright red, fresh paint, 0 rust - offer?
hood - iroc-z hood, prestine, fresh red paint - offer?
Front end - Red, no cracks or damage - offer?
GFX - Pretine, red paint - Offer?
rear bumper - Red, no cracks or damage, red perfect paint - offer?
spoiler - Mint, fresh red paint, no damage or cracks - offers?
hatch - Rust free, no damage, fresh red paint - offers?
RUST FREE SHELL - Mint body, no damage, rust free, t-tops, bright red - $500
Second Shell option - Complete Body, front end, hood, gfx, bumpers, fenders, doors, t-tops hatch, spoiler etc - $1000
All parts are + shipping, if your in the chicago/detroit area, i can get parts there (big or small) for dirt cheap. Can send large parts on a skid via fedex ground.
Pictures avaliable. Car is being completely parted out, only thing im keeping is the engine.
Last edited by SheldonZ28; Feb 4, 2009 at 08:38 AM.
Member
iTrader: (6)
Joined: Jan 2008
Posts: 474
Likes: 1
From: Pittsburgh, PA
Car: 1986 Trans Am, 1985 Trans Am
Engine: 400 SBC, H.O. 305
Transmission: TH400, 700R4
Axle/Gears: 10 Bolt/3.73s, 10 Bolt/3.73s
Re: Whole bunch of parts - LSx iroc-z partout.
Pics of 4th Gen seats?
Supreme Member
iTrader: (7)
Joined: Jun 2008
Posts: 1,468
Likes: 0
From: Minnesota
Car: 89 IROC-Z
Engine: 370 LSX, LS3 Top End
Transmission: Built T-56
Axle/Gears: 9" Aluminum Center 3.89's
Re: Whole bunch of parts - LSx iroc-z partout.
1. What kind of springs and how much drop?
2. Seat pics and are the rears included?
3. I need matching t-tops....Price IDK
4. I need passenger front fender
Hell if you were close enough id buy the whole car!
2. Seat pics and are the rears included?
3. I need matching t-tops....Price IDK
4. I need passenger front fender
Hell if you were close enough id buy the whole car!
Joined: Sep 2005
Posts: 235
Likes: 0
From: Elgin, IL
Car: 92 z28, 07 Silverado
Engine: LS1, 5.3
Transmission: T56
Axle/Gears: 3.73, 3.23
Re: Whole bunch of parts - LSx iroc-z partout.
Im still waiting for the pics for the lsx headers and y pipe. Are they the hawks longtubes or were they another custom job? Would also like pics of those headlights. All to bobbyss23@aol.com. Thanks
Thread Starter
Supreme Member
iTrader: (1)
Joined: Jun 2006
Posts: 1,067
Likes: 0
From: Guelph, Ontario
Car: 89 IROC/05 RX8
Engine: LS1/LS1
Transmission: T56/T56
Axle/Gears: 3.42 GM/3.55 8.8
Re: Whole bunch of parts - LSx iroc-z partout.
Im still waiting for the pics for the lsx headers and y pipe. Are they the hawks longtubes or were they another custom job? Would also like pics of those headlights. All to bobbyss23@aol.com. Thanks
89irocz - Shipping can be arranged
Trending Topics
Member
iTrader: (32)
Joined: Oct 2003
Posts: 448
Likes: 2
From: Indiana
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: Whole bunch of parts - LSx iroc-z partout.
Member
iTrader: (2)
Joined: May 2007
Posts: 127
Likes: 0
From: CT
Car: '88 Iroc-Z z28 Camaro
Engine: Carb 355
Transmission: t5 5-speed
Axle/Gears: 4.11
Re: Whole bunch of parts - LSx iroc-z partout.
Hey can u send me pics of the dash? Its a 4th gen in a third gen rite?
Thread Starter
Supreme Member
iTrader: (1)
Joined: Jun 2006
Posts: 1,067
Likes: 0
From: Guelph, Ontario
Car: 89 IROC/05 RX8
Engine: LS1/LS1
Transmission: T56/T56
Axle/Gears: 3.42 GM/3.55 8.8
Re: Whole bunch of parts - LSx iroc-z partout.
Includes the cut dash pad, cluster w/ plug, all bezels, metal supports, modfied HVAC, Vaccum pigtale etc.
Brian89: Sure was, i ran it for a season with my 305TPI, then it was behind my LS1/4L65e. Sounds absolutly beautiful, big polished 3.5" tips, looks gorgeous. Not a speck of corrosion anywhere on it.
----------
Oh, and the tape on the 4th gen dash in my previous picture was holding the pad down for the velcro's i had just put on to stay stuck, it wasnt there perminently.
Last edited by SheldonZ28; Jan 1, 2009 at 07:54 PM. Reason: Automerged Doublepost
Junior Member
Joined: Jun 2008
Posts: 21
Likes: 0
From: Danville IA
Car: 03 Cobra
Engine: 4.6 DOHC
Transmission: T56
Axle/Gears: 4:10
Re: Whole bunch of parts - LSx iroc-z partout.
Interested in shell.....I want the dash hvac unit and so forth. What all comes with the shell. I'm in the process of doing one of these builds myself.
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: Whole bunch of parts - LSx iroc-z partout.
whats the deal with the springs? what brand, spring rate and how much of a drop are they?
Thread Starter
Supreme Member
iTrader: (1)
Joined: Jun 2006
Posts: 1,067
Likes: 0
From: Guelph, Ontario
Car: 89 IROC/05 RX8
Engine: LS1/LS1
Transmission: T56/T56
Axle/Gears: 3.42 GM/3.55 8.8
Thread Starter
Supreme Member
iTrader: (1)
Joined: Jun 2006
Posts: 1,067
Likes: 0
From: Guelph, Ontario
Car: 89 IROC/05 RX8
Engine: LS1/LS1
Transmission: T56/T56
Axle/Gears: 3.42 GM/3.55 8.8
Re: Whole bunch of parts - LSx iroc-z partout.
Further note,
ALL PRICES ARE OBO
ALL PRICES ARE OBO
Junior Member
Joined: Sep 2008
Posts: 38
Likes: 0
From: Shelton, CT
Car: 1987 Iroc-Z
Engine: 5.7L SB
Transmission: TKO 500
Axle/Gears: 10 bolt 373's and a Detroit Locker
Re: Whole bunch of parts - LSx iroc-z partout.
If you car is the one in the sig which I believe it is lol are the wheels for sale?
Thread Starter
Supreme Member
iTrader: (1)
Joined: Jun 2006
Posts: 1,067
Likes: 0
From: Guelph, Ontario
Car: 89 IROC/05 RX8
Engine: LS1/LS1
Transmission: T56/T56
Axle/Gears: 3.42 GM/3.55 8.8
Re: Whole bunch of parts - LSx iroc-z partout.
PM's sent, those are my old iroc wheels, sold them a long time ago.
Rear end is pending sale
Rear end is pending sale
Member
iTrader: (8)
Joined: Mar 2007
Posts: 343
Likes: 1
From: Shreveport Louisianna Barksdale AFB
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: Whole bunch of parts - LSx iroc-z partout.
too bad your kinda far or id throw you an offer on the gfx possibly the seats too. And that dash looks good, how did you use the 4th gen cluster when you had the 305 in their?
Thread Starter
Supreme Member
iTrader: (1)
Joined: Jun 2006
Posts: 1,067
Likes: 0
From: Guelph, Ontario
Car: 89 IROC/05 RX8
Engine: LS1/LS1
Transmission: T56/T56
Axle/Gears: 3.42 GM/3.55 8.8
Re: Whole bunch of parts - LSx iroc-z partout.
4th gen cluster wired up to perfectly to the stock thirdgen wiring, and all gauges worked perfect. Speedo, i will include instructions & parts for making it work perfect
More price cuts!
Joined: Dec 2007
Posts: 69
Likes: 2
From: Orwigsburg, PA
Car: 94TA 87IrocZ
Engine: 350 305
Transmission: 4L60e 700r4
Axle/Gears: 3.73 3.23
Re: Whole bunch of parts - LSx iroc-z partout.
Whats the best you can do on the headers? When you say custom, do you mean homemade? Pics?
Senior Member
iTrader: (4)
Joined: May 2006
Posts: 704
Likes: 2
From: Beloeil, Quebec
Car: IROC-Z
Engine: LSx
Transmission: T56
Axle/Gears: Fabbed 9"
Re: Whole bunch of parts - LSx iroc-z partout.
Pics of power steering lines to spikeiroc@hotmail.com. Thanks
Member
iTrader: (5)
Joined: Apr 2004
Posts: 400
Likes: 0
From: Va beach
Car: 87 IROC,
Engine: 370 LSx With Boost
Transmission: 4L80E
Axle/Gears: S-60 with 3.50s
Re: Whole bunch of parts - LSx iroc-z partout.
I might be intersted in the wiring harness. Need pics if you can.
Joined: Feb 2007
Posts: 632
Likes: 6
From: college station, texas
Car: numerous
Engine: ls1, others
Transmission: t56, others
Axle/Gears: 3.23 7.6"
Re: Whole bunch of parts - LSx iroc-z partout.
pm sent,
also interested in the trans cross member and gas tank
also interested in the trans cross member and gas tank
Re: Whole bunch of parts - LSx iroc-z partout.
Thread Starter
Supreme Member
iTrader: (1)
Joined: Jun 2006
Posts: 1,067
Likes: 0
From: Guelph, Ontario
Car: 89 IROC/05 RX8
Engine: LS1/LS1
Transmission: T56/T56
Axle/Gears: 3.42 GM/3.55 8.8
Re: Whole bunch of parts - LSx iroc-z partout.
Guys, some parts avail.
Parts Sold:
Harness/PS lines
Headers/Y
Magnaflow catback
PM me if your still looking for certain parts, ive got almost 5 of every part ive got hahah
Parts Sold:
Harness/PS lines
Headers/Y
Magnaflow catback
PM me if your still looking for certain parts, ive got almost 5 of every part ive got hahah
Thread Starter
Supreme Member
iTrader: (1)
Joined: Jun 2006
Posts: 1,067
Likes: 0
From: Guelph, Ontario
Car: 89 IROC/05 RX8
Engine: LS1/LS1
Transmission: T56/T56
Axle/Gears: 3.42 GM/3.55 8.8
![Ca[maro]88's Avatar](https://www.thirdgen.org/forums/customavatars/avatar89811_8.gif){kind=avatar}
Senior Member
iTrader: (2)
Joined: Dec 2008
Posts: 990
Likes: 1
From: Peoria, IL
Car: 1988 Camaro Sport Coupe
Engine: 5.0 305 Carb'd
Transmission: 700R4
Axle/Gears: 3.23
Re: Whole bunch of parts - LSx iroc-z partout.
hey do you still have the dash?? if you do whats the price for it? if you got it pm me im interested.
Joined: Oct 2006
Posts: 3,041
Likes: 8
From: West of Toronto
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn
Re: Whole bunch of parts - LSx iroc-z partout.
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
Nov 14, 2015 12:02 AM