UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!!
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!!
I've changed direction with my project so I don't need these parts anymore. All suspension pieces are NEW and NEVER installed...
UMI BLACK Panhard Rod (on car adjustable) - $100.00 **Sale Pending
Hotchkis Rear Sway Bar (1" hollow) - $175
Eibach Sportline springs *rear only* (lowers rear approx. 1.3") - $100
Holley 650 Double Pump Mechanical Carb (fresh rebuild never installed) - $375
TPI intake manifold - $50
TPI plenum (has some machining on the ports done) - $50
Stock TPI runners - $30
Stock TPI Throttle Body - $20
HEI distributor (fresh rebuild NEVER installed since 50,000 Volts) - $60
700R4 transmission and stock stall converter w/roughly 140k mi on both (shifted flawlessly when removed) - $100
stock 305 w/roughly 140k mi on it (ran fine when removed and doesn't come with a/c, steering pump, alternator and misc exterior bolt-ons) - $150
Polished Aluminum intake for carb (sbc 305/350) - $50
**Prices do NOT include shipping**
that's all for now but there's more to come. Will get pics up soon...
Thanks for looking!
UMI BLACK Panhard Rod (on car adjustable) - $100.00 **Sale Pending
Hotchkis Rear Sway Bar (1" hollow) - $175
Eibach Sportline springs *rear only* (lowers rear approx. 1.3") - $100
Holley 650 Double Pump Mechanical Carb (fresh rebuild never installed) - $375
TPI intake manifold - $50
TPI plenum (has some machining on the ports done) - $50
Stock TPI runners - $30
Stock TPI Throttle Body - $20
HEI distributor (fresh rebuild NEVER installed since 50,000 Volts) - $60
700R4 transmission and stock stall converter w/roughly 140k mi on both (shifted flawlessly when removed) - $100
stock 305 w/roughly 140k mi on it (ran fine when removed and doesn't come with a/c, steering pump, alternator and misc exterior bolt-ons) - $150
Polished Aluminum intake for carb (sbc 305/350) - $50
**Prices do NOT include shipping**
that's all for now but there's more to come. Will get pics up soon...
Thanks for looking!
Last edited by JDS86TA; Jun 17, 2009 at 08:51 PM.
Joined: Dec 2002
Posts: 331
Likes: 3
From: Peterborough, Ontario
Car: 1989 Camaro RS
Engine: 1990 - 5.7
Transmission: Tremec 3550
Axle/Gears: 9 Bolt - 3:45
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
pm sent for the panhard bar.
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
PMs replied to
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
TTT
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
PMs replied to...
***Pending sale on the Panhard Rod***
***Pending sale on the Panhard Rod***
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
PMs Replied to....
Panhard rod SOLD
Pending saleon polished intake for carb (sbc 305/350)
----------
List of what still remains...
Hotchkis Rear Sway Bar (1" hollow) - $175
Eibach Sportline springs *rear only* (lowers rear approx. 1.3") - $100
Holley 650 Double Pump Mechanical Carb (fresh rebuild never installed) - $375
TPI intake manifold - $50
TPI plenum (has some machining on the ports done) - $50
Stock TPI runners - $30
Stock TPI Throttle Body - $20
HEI distributor (fresh rebuild NEVER installed since 50,000 Volts) - $60
700R4 transmission and stock stall converter w/roughly 140k mi on both (shifted flawlessly when removed) - $100
stock 305 w/roughly 140k mi on it (ran fine when removed and doesn't come with a/c, steering pump, alternator and misc exterior bolt-ons) - $150
Polished Aluminum intake for carb (sbc 305/350) - $50 ***SALE PENDING
Panhard rod SOLD
Pending saleon polished intake for carb (sbc 305/350)
----------
List of what still remains...
Hotchkis Rear Sway Bar (1" hollow) - $175
Eibach Sportline springs *rear only* (lowers rear approx. 1.3") - $100
Holley 650 Double Pump Mechanical Carb (fresh rebuild never installed) - $375
TPI intake manifold - $50
TPI plenum (has some machining on the ports done) - $50
Stock TPI runners - $30
Stock TPI Throttle Body - $20
HEI distributor (fresh rebuild NEVER installed since 50,000 Volts) - $60
700R4 transmission and stock stall converter w/roughly 140k mi on both (shifted flawlessly when removed) - $100
stock 305 w/roughly 140k mi on it (ran fine when removed and doesn't come with a/c, steering pump, alternator and misc exterior bolt-ons) - $150
Polished Aluminum intake for carb (sbc 305/350) - $50 ***SALE PENDING
Last edited by JDS86TA; Jun 17, 2009 at 08:51 PM. Reason: Automerged Doublepost
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
TTT
Trending Topics
Joined: Dec 2002
Posts: 331
Likes: 3
From: Peterborough, Ontario
Car: 1989 Camaro RS
Engine: 1990 - 5.7
Transmission: Tremec 3550
Axle/Gears: 9 Bolt - 3:45
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
bump for a great seller!
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
Thanks Scamo-2.8!!! Hope the Panhard Rod is to your liking!
----------
List of what still remains...
Hotchkis Rear Sway Bar (1" hollow) - $175
Eibach Sportline springs *rear only* (lowers rear approx. 1.3") - $100
Holley 650 Double Pump Mechanical Carb (fresh rebuild never installed) - $375
TPI intake manifold - $50
TPI plenum (has some machining on the ports done) - $50
Stock TPI runners - $30
Stock TPI Throttle Body - $20
HEI distributor (fresh rebuild NEVER installed since 50,000 Volts) - $60
700R4 transmission and stock stall converter w/roughly 140k mi on both (shifted flawlessly when removed) - $100
stock 305 w/roughly 140k mi on it (ran fine when removed and doesn't come with a/c, steering pump, alternator and misc exterior bolt-ons) - $150
Polished Aluminum intake for carb (sbc 305/350) - $50 ***SALE PENDING
----------
List of what still remains...
Hotchkis Rear Sway Bar (1" hollow) - $175
Eibach Sportline springs *rear only* (lowers rear approx. 1.3") - $100
Holley 650 Double Pump Mechanical Carb (fresh rebuild never installed) - $375
TPI intake manifold - $50
TPI plenum (has some machining on the ports done) - $50
Stock TPI runners - $30
Stock TPI Throttle Body - $20
HEI distributor (fresh rebuild NEVER installed since 50,000 Volts) - $60
700R4 transmission and stock stall converter w/roughly 140k mi on both (shifted flawlessly when removed) - $100
stock 305 w/roughly 140k mi on it (ran fine when removed and doesn't come with a/c, steering pump, alternator and misc exterior bolt-ons) - $150
Polished Aluminum intake for carb (sbc 305/350) - $50 ***SALE PENDING
Last edited by JDS86TA; Jun 17, 2009 at 08:53 PM. Reason: Automerged Doublepost
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
PMs Replied to....
Panhard rod SOLD
Polished intake for carb (sbc 305/350) SOLD
----------
List of what still remains...
Hotchkis Rear Sway Bar (1" hollow) - $175
Eibach Sportline springs *rear only* (lowers rear approx. 1.3") - $100
Holley 650 Double Pump Mechanical Carb (fresh rebuild never installed) - $375
TPI intake manifold - $50
TPI plenum (has some machining on the ports done) - $50
Stock TPI runners - $30
Stock TPI Throttle Body - $20
HEI distributor (fresh rebuild NEVER installed since 50,000 Volts) - $60
700R4 transmission and stock stall converter w/roughly 140k mi on both (shifted flawlessly when removed) - $100
stock 305 w/roughly 140k mi on it (ran fine when removed and doesn't come with a/c, steering pump, alternator and misc exterior bolt-ons) - $150
Panhard rod SOLD
Polished intake for carb (sbc 305/350) SOLD
----------
List of what still remains...
Hotchkis Rear Sway Bar (1" hollow) - $175
Eibach Sportline springs *rear only* (lowers rear approx. 1.3") - $100
Holley 650 Double Pump Mechanical Carb (fresh rebuild never installed) - $375
TPI intake manifold - $50
TPI plenum (has some machining on the ports done) - $50
Stock TPI runners - $30
Stock TPI Throttle Body - $20
HEI distributor (fresh rebuild NEVER installed since 50,000 Volts) - $60
700R4 transmission and stock stall converter w/roughly 140k mi on both (shifted flawlessly when removed) - $100
stock 305 w/roughly 140k mi on it (ran fine when removed and doesn't come with a/c, steering pump, alternator and misc exterior bolt-ons) - $150
Last edited by JDS86TA; Jun 17, 2009 at 08:53 PM.
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
TTT
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
PM replied to....
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
Reviving this thread... all items listed as not sold above are still available. I've been busy and haven't had time to monitor this. There's some good TPI parts up for grabs... Let's deal!
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
Here's some pictures of the holley carb for those of you running carb'd setups that might be interested in an awesome carb. Asking $375 which is discounted from what I paid, but we can deal.
Last edited by JDS86TA; Jun 17, 2009 at 08:55 PM.
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
Some more pics for you carb guys... I promise you won't be disappointed with this carb. I only didn't use it because I decided to go fuel injected after I bought this.
Oh, and this does have a milled choke horn for more even air flow and the 4 corner idler system. It also has center hung float bowls... this carb will PERFORM!! It's perfect for the street OR the strip... don't let this one get away!
Oh, and this does have a milled choke horn for more even air flow and the 4 corner idler system. It also has center hung float bowls... this carb will PERFORM!! It's perfect for the street OR the strip... don't let this one get away!
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
TTT... Is no one interested in any of this? Prices are negotiable... let's talk!
Last edited by JDS86TA; Jun 18, 2009 at 11:29 AM.
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
TTT
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
TTT
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
TTT
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
TTT any interest at all? Make some offers....
Member
iTrader: (1)
Joined: Sep 2003
Posts: 144
Likes: 0
From: Chatsworth, Ga
Car: 1965 Chevelle SS
Engine: 355
Transmission: TH350
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
$40 shipped to 30705(North Ga) for the distributor?
It is a small cap TPI style distributor(two plugs), right?
It is a small cap TPI style distributor(two plugs), right?
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
Thanks for the offer cmexlr8 but that distributor isn't a small cap TPI distributor and doesn't have the two plugs for an external coil. Guess I should have clarified that in the posting... sorry!
-----------------------------------------------------------------------
*Note to any other seekers distributor is NOT small cap TPI distributor with 2 plug connection for the external coil.
-----------------------------------------------------------------------
*Note to any other seekers distributor is NOT small cap TPI distributor with 2 plug connection for the external coil.
Last edited by JDS86TA; Jul 9, 2009 at 12:21 AM.
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2006
Posts: 1
Likes: 0
From: SWMO
Car: 86 TA
Engine: SB2.2 400c.i. 700-800 estimated hp
Transmission: Built 700R4... for now
Axle/Gears: Triang. 4 link Ford 9" w/4.10's
Re: UMIPerformance Panhard Rod- Holley 650 DP Carb - Hotchkis Rear Sway Bar and MORE!
TTT... I need some cash for a build project any offers for these parts? I'll entertain reasonable offers...
Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
NW Indiana and South Chicago Suburb
14
Jan 31, 2025 05:10 PM
1992rs/ss
Engine/Drivetrain/Suspension Parts for Sale
16
Jan 28, 2016 09:58 PM
