im changing my intake to a stealth ram and now i am selling my pride and joy.

SDPC vortec manifold, ported... i went through in 2 spots.. one is right beforei think is 5,7 goes into the head... that was welded up and seals perfectly the other was where the runners go onto the manifold and that was too thin to weld.... it was epoxyied instead and also seals perfectly... i ran this setup like this for the summer and some of the fall with no vacume leaks whatsoever.
i want $350

SLP newer style 89-92 runners [ newer cast of the slps] Fully siamesed, there is no inner wall to these runners at all. [this took forever to do] they are also highly polished.. they arent perfect and there are a few dings in some hard to see spots but once they are on the car they look amazing becuase the imperfections are hidden.... [ i have easily over 100 hours of porting a polishing these runnners alone] I have had countless compliments on the way they look. $370

everything was ported using the Mr Gasket 146 1 3/4" port gaskets and i cut them to match the siameseing
these are hard to get i have a full set i had for backups just incase $30

stock 89 plenum.. siamesed to match runners.. polished on sides and top.. not bottom [never see it] Very nice polish job... almost a perfect mirror reflection. $150

corvette TPI plenum extension polished SOLD

stock fuel rails with brand new accel AFPR that i paid $180 for at the local speed shop... $ 60

mildly ported 85 to 88 plenum SOLD

Stock fuel rails no reg SOLD

89 to 92 runners need dents remouved.. buy the ***** on ebay SOLD

Accel 30 lb injectors i bought new several years ago.. only ran them for a month.... all work great no problems just too big for me

black GTA cupholder $20

SLP throttle body airfoil $25

we can work a package deal if you want.. i will combine ship.. i can get more pics.. if you dont like the price give me an offer { pm me] I had no problems with any of this stuff and the ported intake was way way way way better than the stock one.. tons of torque.... not to mention it looked amazing... i had people drooling over my engine bay... save youself the time on polishing and porting and buy my setup..

Lee

 

pics

 

sorry all with dial up

 

heres a pic in the car

 

I'll take that polished plenum extension!
pm me your paypal addy.

 

bfx@primus.ca is my paypal

 

is that going to be $25 shipped?

 

no.. i need address. Pm me

 

ok,pm sent.

 

how much for the accel injectors?

what motor combo was ran with the 30# setup?

i might need them for my 327 setup

 

$100 for the injectors... i had them in my 355 to big for stock tpi cam thats why i changed.

 

So you want a total of $40 for the stock upper plenum and the dented stock runners?? And what about the stock fuel rails in the pic with the fpr missing? I am in Welland, so would be more interested in picking things up if we can come together in a price? I will be in Toronto on Feb 14th for the International Auto show.

Thanks

 

yep
the rails without the reg are 15

you could have plenum,runners, and rails for 55 bucks

 

stock pleum rails runners and the extension sold

new price

$500 for the polished and ported runners and plenum

 

that cup holder, is that the kinda that are on the doors?


only one?

 

yes it is.. i had a GTA a year ago and i broke the other off so i remouved it and now here it is.

 

Can ya do $20 shipped for the cup holder to: Woodstock, GA 30189

 

what do you want for it. shipped to 33604?

 

FunIROC .... that would be like giving it to you for free... no.. i want the full $20 for this shipping not included... these are not all that common.

??? pm, sent

 

Ok, how much would it be shipped then.

Thanks

 

heres the pic

 

BTW i forgot to mention that i have all of the SLP allen head bolts for the runners... they come with.

i found some other stuff...

3" inlet 9 " long 5" wide K&N fliter like new ran for less than a month never saw water
$50

89 TPI 350 Iron heads $250

89 TPI exhaust manifolds with air $80

1.6 Harland sharp roller rockers bought new for almost $400 ran for less than 100kms $250

 

still have lots of stuff
If you want lots we can make a deal... ive still got alot of good stuff for someone doing a tpi buildup.
pm me

 

PM sent RE: AFPR shipped to NY

 

are the $250 89 tpi heads super super low miles or are they upgraded?

 

they are stock 180 000 miles... am i off base on the price here... i know for a fact these are the best iron gm heads next to vortecs of course.

 

If you can get $250 for them then there not over priced..,,, not knocking your prices just thought maybe they were built up...GL with the sale....free bump

 

new prices
heads are $200
vortec base $300FIRM

 

new price on intake

$500 for plenum and runners and bolts and gaskets

things i am interested in trading for are 3" electric exhaust cutout, underdrive pulleys, LCA relocation brackets, or adjustable torque arm