SBC Parts - MSD, CompCam 268xfi World Heads Edelbrock Performer RPM Malory 4309 +More
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
SBC Parts - MSD, CompCam 268xfi World Heads Edelbrock Performer RPM Malory 4309 +More
MSD Streetfire Distributor 8362 - 80 shipped
Mallory 4309 fuel pressure regulator with brass fittings - 85 shipped
Edelbrock PErformer RPM Intake modified to work with post 87 heads but will still work with regular heads - 110 shipped
1 pc rms flywheel with less than 500 miles -85 shipped
90-92 Camaro Style Rims (White) Good tread on 3 tires, one needs to be replaced. - 75
350 block with 40k miles on block. Comes with block, pistons, rods, and crank but crank needs to be turned. 250
World Products Heads (http://www.summitracing.com/parts/WRL-043640/) - 400 Was checked about 2000 miles for warp and cracks came back clean.
700r4 that lost 3rd and 4th clutch pack - 75
A/C Compressor (newer style) - 60 shipped
90 -92 yellow Auto shift plate one corner is chipped - 50 shipped
Will ship big stuff but there will be a handling for me to build crates and etc along with shipping price, Also can deliver for an extra price depending on distance.
540-323-2292
Mallory 4309 fuel pressure regulator with brass fittings - 85 shipped
Edelbrock PErformer RPM Intake modified to work with post 87 heads but will still work with regular heads - 110 shipped
1 pc rms flywheel with less than 500 miles -85 shipped
90-92 Camaro Style Rims (White) Good tread on 3 tires, one needs to be replaced. - 75
350 block with 40k miles on block. Comes with block, pistons, rods, and crank but crank needs to be turned. 250
World Products Heads (http://www.summitracing.com/parts/WRL-043640/) - 400 Was checked about 2000 miles for warp and cracks came back clean.
700r4 that lost 3rd and 4th clutch pack - 75
A/C Compressor (newer style) - 60 shipped
90 -92 yellow Auto shift plate one corner is chipped - 50 shipped
Will ship big stuff but there will be a handling for me to build crates and etc along with shipping price, Also can deliver for an extra price depending on distance.
540-323-2292
Last edited by JTNKTZ; Dec 19, 2010 at 06:58 PM.
Senior Member
iTrader: (2)
Joined: Jan 2007
Posts: 733
Likes: 1
From: jackson new jersey
Car: 1991 camaro vert
Engine: ls1 soon
Transmission: t56 soon
Axle/Gears: moser 12bolt 4.10 soon!
Re: Lots of different parts
whats up buddy long time no see.. where all these goodies come from? u still got ur vert?
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, Holley 650 DP, Headman LT's, Edelbrock Performer RPM intake, +Mo
Will be adding pictures soon. Just let me know of any specifics.
Member
iTrader: (6)
Joined: Jan 2009
Posts: 223
Likes: 0
From: Mount Carroll, IL
Car: 1992 firebird
Engine: SBC 350
Transmission: TH350
Re: SBC Parts - MSD, Holley 650 DP, Headman LT's, Edelbrock Performer RPM intake, +Mo
whats the specs on the air cleaner? And are the valve covers center bolt or no?
Trending Topics
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, Holley 650 DP, Headman LT's, Edelbrock Performer RPM intake, +Mo
Just a forewarning they do have a little surface rust and I recommend they get cleaned up a little.

Heres picture of the chrome some stuff
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Senior Member
iTrader: (2)
Joined: Jan 2007
Posts: 733
Likes: 1
From: jackson new jersey
Car: 1991 camaro vert
Engine: ls1 soon
Transmission: t56 soon
Axle/Gears: moser 12bolt 4.10 soon!
Re: Lots of different parts
im trying to get my hands on an ls1 parts car, any down that way? i found a 99 ss in colorado its a lil far im waiting on a price tho but i really wanna go get it sooo bad. and once i get mine and have it swapped ill have to come back down and we can show the honda crew a thing or two lol
Last edited by quickkris2006; Oct 20, 2010 at 08:22 PM.
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: Lots of different parts
im trying to get my hands on an ls1 parts car, any down that way? i found a 99 ss in colorado its a lil far im waiting on a price tho but i really wanna go get it sooo bad. and once i get mine and have it swapped ill have to come back down and we can show the honda crew a thing or two lol
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, Holley 650 DP, Headman LT's, Edelbrock Performer RPM intake, +Mo
Bumppp holley 650 solddddd
Junior Member
iTrader: (4)
Joined: Aug 2009
Posts: 3
Likes: 0
From: Ft. Defiance VA
Car: '89 Firebird and '71 chevy pick up
Engine: 305 TBI, 350
Transmission: 700R4
Re: SBC Parts - MSD, Holley 650 DP, Headman LT's, Edelbrock Performer RPM intake, +Mo
Got the old transmission out. Everything looks to match up just as you said it would. Would like to thrash whoever put the old one in though.Only had 3 bolts holding trans to the block. Fly wheel broken. TV cable bolt head rounded off....AARRRRRRRR.
Thanks for your help
Thanks for your help
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, Holley 650 DP, Headman LT's, Edelbrock Performer RPM intake, +Mo
Seperentine belt system sold!!!!
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, CompCam 268xfi, Headman LTs, Edelbrock Performer RPM Posi Rear +
Updated
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, CompCam 268xfi, Headman LTs, Edelbrock Performer RPM Posi Rear +
SHIPPED PRICES ADDED
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, CompCam 268xfi, Headman LTs, Edelbrock Performer RPM Posi Rear +
Bump
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, CompCam 268xfi, World Heads, Edelbrock Performer RPM Posi Rear +
Added and got rid of some sstuff
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, CompCam 268xfi, World Heads, Edelbrock Performer RPM Posi Rear +
Rear sold.
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, CompCam 268xfi, World Heads, Edelbrock Performer RPM Posi Rear +
Bump.
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, CompCam 268xfi, World Heads, Edelbrock Performer RPM Posi Rear +
Come on guys good stuff at a good price!!!
Member
Joined: Jun 2010
Posts: 159
Likes: 0
From: Hamilton, NJ
Car: 1986 Pontiac Firebird
Engine: 357ci 400hp 4BBL
Transmission: 700r4
Re: SBC Parts - MSD, CompCam 268xfi World Heads Edelbrock Performer RPM Malory 4309 +
Do you still have the water pump? Will it work on a 350 engine? Do you have a set of headers for sale?
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, CompCam 268xfi World Heads Edelbrock Performer RPM Malory 4309 +
yes and yes and no.
Member
Joined: Jun 2010
Posts: 159
Likes: 0
From: Hamilton, NJ
Car: 1986 Pontiac Firebird
Engine: 357ci 400hp 4BBL
Transmission: 700r4
Re: SBC Parts - MSD, CompCam 268xfi World Heads Edelbrock Performer RPM Malory 4309 +
can you send a pic of the water pump to mikesammy@rocketmail.com or just upload one here so I can see it. Thanks
Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, CompCam 268xfi World Heads Edelbrock Performer RPM Malory 4309 +
There is not much to it, it's a brand new water pump without the pulley.


Thread Starter
Senior Member
iTrader: (10)
Joined: Aug 2008
Posts: 638
Likes: 0
From: Winchester, VA
Car: 1991 Camaro RS/1989 Vert RS
Engine: 355/350
Transmission: T-5/T-5
Axle/Gears: BW9bolt3.45posi/3.23 Posi
Re: SBC Parts - MSD, CompCam 268xfi World Heads Edelbrock Performer RPM Malory 4309 +
bump
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Sep 17, 2020 08:26 AM
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
Aug 17, 2015 02:00 PM




Yeah I still have vert. I am selling it though. 

