[KS] Lots of TPI intake parts
#1
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Lots of TPI intake parts
Prices do not include shipping in the lower 48 unless otherwise noted. I accept Paypal, and normally can ship next day.
Picture is not 100% accurate; things have been sold, and parts have been added to the pile.
set of pre 89 runners. SOLD
89 lower manifold. SOLD
87 fuel rail. Make offer
88 fuel rail. Make offer
Also:
Set of 88 350 injectors. Ohm 15.6- 15.8. SOLD
9th injector from 88. SOLD
Set of 89 350 injectors that Ohm great. SOLD
Set of 89 305 injectos that Ohm great. SOLD
Set of 89 L98 (350 TPI) injectors. SOLD
87 IROC accessory system with AC compressor and PS pump. $75 shipped
2 pre 89 TPI throttle cables. $25 shipped ea
I have more random tidbits than what's in this picture; ask and I might have it!
Picture is not 100% accurate; things have been sold, and parts have been added to the pile.
set of pre 89 runners. SOLD
89 lower manifold. SOLD
87 fuel rail. Make offer
88 fuel rail. Make offer
Also:
Set of 88 350 injectors. Ohm 15.6- 15.8. SOLD
9th injector from 88. SOLD
Set of 89 350 injectors that Ohm great. SOLD
Set of 89 305 injectos that Ohm great. SOLD
Set of 89 L98 (350 TPI) injectors. SOLD
87 IROC accessory system with AC compressor and PS pump. $75 shipped
2 pre 89 TPI throttle cables. $25 shipped ea
I have more random tidbits than what's in this picture; ask and I might have it!
Last edited by thewizard; 05-11-2011 at 09:46 AM. Reason: parts sold/added
#2
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
If there's interest in complete systems (minus TB: they sold) I will make a deal with fasteners, thermostadt housing, sensors, coil/throttle brackets, etc, depending upon specific parts combintaions. Feel free to PM me with suggestions, questions, and offers.
Thanks
Thanks
Last edited by thewizard; 12-27-2010 at 01:35 PM.
#6
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
Nothing aftermarket. Just a couple factory sets.
#7
Member
iTrader: (4)
Join Date: Aug 2009
Location: Underhill,vt
Posts: 160
Likes: 0
Received 1 Like
on
1 Post
Car: 98 camaro ss, 98 grand cherokee 5sp
Engine: 5.7 ls1, 4.0 sixxer
Transmission: T56, ax15 swapped
Axle/Gears: 3.42, 3.73
Re: Lots of TPI intake parts
how much for 350 22lb injectors, shipped to 05656.($35?) Anyway can you give me the part number off them? very interested
Trending Topics
#9
Member
iTrader: (2)
Join Date: Feb 2000
Location: North Battleford, Saskatchewan, Canada
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 GTA & 92 GTA & 92 GTA
Engine: 305 TPI & 350 TPI & 350 TPI
Transmission: 700R4
Axle/Gears: 3.42 & 3.23 & 3.23
Re: Lots of TPI intake parts
I am restoring a yellow 92 GTA and I am looking for the 14 mm bolt and metal clip that holds the alternator wiring. I believe that all 88-92 TPI cars came with these parts. There is no part numbers available for these parts so I am looking for good condition, rust free parts. Below is a picture for the bolt and clip.
I am also looking for 3 throttle body coolant clamps for 1985-92 TPI cars. I have tried buying them new but the 2 part numbers I have are for worm style clamps. I am looking for clamps in good condition that aren't rusty. Here are some pics:
Let me know if you have these parts. Thanks.
I am also looking for 3 throttle body coolant clamps for 1985-92 TPI cars. I have tried buying them new but the 2 part numbers I have are for worm style clamps. I am looking for clamps in good condition that aren't rusty. Here are some pics:
Let me know if you have these parts. Thanks.
#11
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
$40 shipped for the 89' lower to 23453.
I do not have any of those factory pieces in good shape for that model year. If you need one of the bolts I'm sure I could find one and wire wheel it off for you.
Injectors shipped in the lower 48 for $35. P# for the 88' 350 injectors is 5235302.
I do not have any of those factory pieces in good shape for that model year. If you need one of the bolts I'm sure I could find one and wire wheel it off for you.
Injectors shipped in the lower 48 for $35. P# for the 88' 350 injectors is 5235302.
#14
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
One IM sold. Still have a virgin 89 and a lightly ported 86 example.
#16
Supreme Member
iTrader: (3)
Re: Lots of TPI intake parts
I am interested in a set of runners like shown on the left or center in the picture. I assume no dents and they are in good shape. Also intersted in a plenum particularly the lower one shown in the picture. I also assume they are in good shape with no threads pulled etc. Let me know. I live in Southern California.
#17
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
I suppose an updated picture would help.
The runners you inquired about are the 89'+ style; I only have the older sets left.
The upper you referenced is also 89'+. The only one I have is from an 88.
The runners you inquired about are the 89'+ style; I only have the older sets left.
The upper you referenced is also 89'+. The only one I have is from an 88.
#18
Member
iTrader: (2)
Join Date: Feb 2000
Location: North Battleford, Saskatchewan, Canada
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 GTA & 92 GTA & 92 GTA
Engine: 305 TPI & 350 TPI & 350 TPI
Transmission: 700R4
Axle/Gears: 3.42 & 3.23 & 3.23
Re: Lots of TPI intake parts
$40 shipped for the 89' lower to 23453.
I do not have any of those factory pieces in good shape for that model year. If you need one of the bolts I'm sure I could find one and wire wheel it off for you.
Injectors shipped in the lower 48 for $35. P# for the 88' 350 injectors is 5235302.
I do not have any of those factory pieces in good shape for that model year. If you need one of the bolts I'm sure I could find one and wire wheel it off for you.
Injectors shipped in the lower 48 for $35. P# for the 88' 350 injectors is 5235302.
#20
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
Yes, I can include the bracket and fittings. I do have a good EGR and a distributor cover. The runners are not entirely dent free, but the dents are small.
#22
#26
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
List updated.
Yes, I have two pre 89' fuel rails remaining. Also have a stock regulator and injectors for either size factory engine.
Yes, I have two pre 89' fuel rails remaining. Also have a stock regulator and injectors for either size factory engine.
#27
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
Updated. I'll try to get a new picture of what I currently have Wednesday.
#29
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
Yes. Injectors are from 89 LB9, and rails are from pre 89 engines.
#32
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
LB9 injectors and 88 plenum/runners sold. List at top of thread should be current.
#35
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
PM replied.
As far as I know there's no difference between the 88 and 89 EGR valves.
As far as I know there's no difference between the 88 and 89 EGR valves.
#36
Junior Member
iTrader: (1)
Join Date: Apr 2010
Location: Menifee, California
Posts: 20
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Pontiac Trans Am GTA
Engine: L98 TPI 5.7L 350
Transmission: 700R4 Automatic
Re: Lots of TPI intake parts
prob not, i just need a negative backpressure style egr valve and the temp sensor that screws in to the base. dont know if it helps, but the part # for the one im replacing is 17085813 followed by 82N, i guess as long as its got an N on it it should be what im looking for. if so,how much to ship to 92585. thanks.
#37
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
I'll check on that tonight. If there's anything else you can think of you might need, regardless of drivetrain/interior/exterior, let me know.
#39
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
I do not have any extra MAF sensors.
The EGR I have has these characters on it:
CTF 17085813
266 82N
I really have no clue what to ask. Seems like the last one I sold went for $50 shipped if that means anything to ya.
The EGR I have has these characters on it:
CTF 17085813
266 82N
I really have no clue what to ask. Seems like the last one I sold went for $50 shipped if that means anything to ya.
#41
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
EGR and 9th injector sold. Off the top of my head this is the major items I have left:
pre 89 runners in good shape, save one dent. SOLD
89 lower intake. $40 shipped
89 L98 injectors. $35 shipped
2 pre 89 F-Body throttle cables. $25 shipped (ea)
2 pre 89 fuel rails. Make offers.
pre 89 runners in good shape, save one dent. SOLD
89 lower intake. $40 shipped
89 L98 injectors. $35 shipped
2 pre 89 F-Body throttle cables. $25 shipped (ea)
2 pre 89 fuel rails. Make offers.
Last edited by thewizard; 04-25-2011 at 09:18 PM.
#44
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
I do not have any throttle bodies left. I do have two throttle cables that are the older style. $25 shipped ea.
Thanks for the interest.
Thanks for the interest.
#45
Supreme Member
iTrader: (2)
Join Date: Mar 2002
Location: West Houston, Tx.
Posts: 1,029
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Z28
Engine: 355 TPI
Transmission: 700r4
Axle/Gears: 9 bolt disc / 3:27
Re: Lots of TPI intake parts
is the 89 lower intake the same setup as the 91 ? do you still have it? pm me
#46
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
Last injectors and 89 lower intake sold.
Anyone need pre 89 fuel rails, or pre 89 throttle cables? Make reasonable offers.
Anyone need pre 89 fuel rails, or pre 89 throttle cables? Make reasonable offers.
#47
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
Have the lower intake from my 88 FS now ($40 shipped) along with the EGR ($30 shipped), hard lines from fuel rail, soft lines, and fuel rails themselves. Tons of fasteners.
I'll try to get a picture up tomorrow. Feel free to make offers.
Thanks.
I'll try to get a picture up tomorrow. Feel free to make offers.
Thanks.
#48
Member
iTrader: (2)
Join Date: Feb 2000
Location: North Battleford, Saskatchewan, Canada
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 GTA & 92 GTA & 92 GTA
Engine: 305 TPI & 350 TPI & 350 TPI
Transmission: 700R4
Axle/Gears: 3.42 & 3.23 & 3.23
Re: Lots of TPI intake parts
Andy
#49
Member
Thread Starter
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Lots of TPI intake parts
Is the head on that bolt 13 or 15mm? That clamp looks like the same piece that holds a wiring harness on the PS cyl head; I don't think I have any of those, but I can likely find a bolt for you.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
1992rs/ss
NW Indiana and South Chicago Suburb
12
05-19-2020 07:02 PM
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
08-17-2015 02:00 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM