A buddy of mine is parting out his 383. Everything is brand new, it was only assembled.


Lowered prices.


2. Scorpion Roller Rockers SCP2001 $235
*7/16 stud non self aligning.

8. Brodix IK200 top end kit. $1500
*Complete heads, intake (HV1000,
valve covers (vc102), NGK spark plugs,
valve cover studs and bolts. Heads are
good for .575 lift hydraulic roller.

9. Rotating assembly $1600
Eagle Specialty Products B12107030
*3.75 stroke Crank, 5.7 inch rods, pistons, rings,
and bearings.
Crank is forged, one piece RMS. H beam rods
with full float SRP pistons. 12cc dish.
This assembly is balanced. .030 This is a
forged assembly.
10. Late model 638 block. $325
.030 over. 4 bolt main with fuel
pump boss drilled. Will come with lifter guides,
retaining tray, cam retainer plate, and seal
adapter. Also has new cam bearings,
and brass freeze plugs. Pick up only.

 

What are the specs on the heads? $1000 include the rockers and everything minus the VC's? Straight or angle plugs?

Thanks,
Jeff

 

1K is just for the complete heads. No rockers, no plugs, just the heads. They are brodix IK200's, With Comp 986-16 valvesprings.

 

I looked on the Brodix site before I posted my question it says

"
The features for the IK® 180 / 200 include a revolutionary ultra casting, versatile 180 cc or 200 cc intake ports that are specifically designed for optimum versatility, and 64 cc or 70 cc combustion chambers that allow the use of several types of fuels.


http://www.brodix.com/heads/ik.html



So I was asking if they are 64cc or 70cc combustion chambers. It doesn't matter though, I need angle plugs to clear my headers anyway...

 

x2 on runner ports and the cc

 

The heads are 200 cc intake ports. 64 cc chambers. They have been upgraded to 10 degree locks, and have 2.02/1.6 valves.

 

TTT. Will part out.

 

Roller lifters sold.

Also for sale, 062 casting Vortecs. 1.94-1.5 valves, 3 angle valve job. Spring pockets have been cut for larger springs. Currently have 986 valve springs on them. But can ship them with 981 spring. 400 plus shipping with 981-16 valvesprings.

Hurricane intake for Vortec heads. Comes painted black. Also includes ARP stainless intake bolts. $100 plus shipping.

 

Vortecs sold.

 

Timing chain sold.

 

I'll take the pushrods. PM me shipped to 87108.

 

still have the vortec intake???

 

would you sell just the rotating assembly?

 

GonnabeatargetZ, yes I still have the intake.

FlippindaBird, yes I will sell the rotating assembly.

 

how mcuh shipped to 18428?

 

I'll prepare a couple of boxes and get it estimated tomorrow.

 

Will trade the Vortec intake for an 88-95 RPM Air gap or Victor Jr. equal.

 

Pushrods sold.

 

Parts remaining. Plus shipping unless noted.

Vortec Hurricane intake. Painted black. $150
ARP stainless bolts for Vortec intake. ARP 434-2102 $25 shipped Lower 48 only.

2. Scorpion Roller Rockers SCP2001 $235
*7/16 stud non self aligning.
8. Brodix IK200 top end kit. $1500
*Complete heads, intake (HV1000,
valve covers (vc102), NGK spark plugs,
valve cover studs and bolts. Heads are
good for .575 lift hydraulic roller.
9. Rotating assembly $1600
Eagle Specialty Products B12107030
*3.75 stroke Crank, 5.7 inch rods, pistons, rings,
and bearings.
Crank is forged, one piece RMS. H beam rods
with full float SRP pistons. 12cc dish.
This assembly is balanced. Bearings are
standard. Pistons are .030 This is a
forged assembly.

 

Would u sell the rods and piston? If so how much to 42303?

 

Not yet interested in splitting up the bottom end kit as it is balanced.