[Sold] BAER BILLET 3/4" wheel spacers, REINFORCED front LCA!
07-03-2012, 01:37 PM
#1
BAER BILLET 3/4" wheel spacers, REINFORCED front LCA!
BAER 3/4" thick, Billet aluminum, multiple wheel lug patterns, ford, chevy etc.
With stock brakes and longer ARP wheel studs these spacers put my front rims directly in line with the outer edge of the front fender for a perfect look. Only getting rid of them bc I got a 13" BAER brake setup and 1.5" aluminum adapters now.
Stock front LCA that has been reinforced with 1/8" steel, TIG welded. No bushings (had poly in them but pressed them out) So half the work is already done for you... just press new rubber or poly/delrin ones in and your good to go. THe Balljoint is pretty new and was a stock replacement parts store one. It was painted with POR15 black paint.
Spacers looking to get 45$ plus shipping
LCA looking to get 40$ plus shipping.
I accept paypal, check, cash, money order
With stock brakes and longer ARP wheel studs these spacers put my front rims directly in line with the outer edge of the front fender for a perfect look. Only getting rid of them bc I got a 13" BAER brake setup and 1.5" aluminum adapters now.
Stock front LCA that has been reinforced with 1/8" steel, TIG welded. No bushings (had poly in them but pressed them out) So half the work is already done for you... just press new rubber or poly/delrin ones in and your good to go. THe Balljoint is pretty new and was a stock replacement parts store one. It was painted with POR15 black paint.
Spacers looking to get 45$ plus shipping
LCA looking to get 40$ plus shipping.
I accept paypal, check, cash, money order
Last edited by customblackbird; 08-16-2012 at 11:58 PM.
07-03-2012, 09:57 PM
#2
Member
iTrader: (14)
Join Date: Mar 2000
Location: Painesville, Ohio USA
Posts: 254
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1989 IROC Z28
Engine: 305 TBI (L03)
Transmission: 700R4 w/ Corvette servo
Axle/Gears: 4th Gen, 3.23, posi, PBR
Re: BAER BILLET 3/4" wheel spacers, REINFORCED front LCA!
PM sent on wheel spacers.
07-06-2012, 08:28 PM
#4
Member
iTrader: (14)
Join Date: Mar 2000
Location: Painesville, Ohio USA
Posts: 254
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1989 IROC Z28
Engine: 305 TBI (L03)
Transmission: 700R4 w/ Corvette servo
Axle/Gears: 4th Gen, 3.23, posi, PBR
Re: BAER BILLET 3/4" wheel spacers, REINFORCED front LCA!
I'll take the spacers. Email sent.
07-07-2012, 12:44 PM
#5
Member
iTrader: (14)
Join Date: Mar 2000
Location: Painesville, Ohio USA
Posts: 254
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1989 IROC Z28
Engine: 305 TBI (L03)
Transmission: 700R4 w/ Corvette servo
Axle/Gears: 4th Gen, 3.23, posi, PBR
Re: BAER BILLET 3/4" wheel spacers, REINFORCED front LCA!
Payment sent for wheel spacers.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM