[WA] WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
Thread Starter
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
have a set of the compcams pro mag roller rockers close to new 100% shape. fits 3/8 stud.
made of c moly the good stuff...not ss and less then half price
yes with poly locks all comp cams
paypal ok add 4%
for $155 total ill sell rockers and toss a new stud girdle set in.. and pick up shipping!
ALSO NOTE: this set will fit any reg SBC head still..But was set up to run on a set of the Trick Flow twisted Wedge heads. (larg valve spring)
1.44 diameter springs..so your good to go with most others..all the work is done for ya
made of c moly the good stuff...not ss and less then half price
yes with poly locks all comp cams
paypal ok add 4%
for $155 total ill sell rockers and toss a new stud girdle set in.. and pick up shipping!
ALSO NOTE: this set will fit any reg SBC head still..But was set up to run on a set of the Trick Flow twisted Wedge heads. (larg valve spring)
1.44 diameter springs..so your good to go with most others..all the work is done for ya
Last edited by articwhiteZ; Jun 30, 2013 at 09:19 PM.
Joined: Jun 2000
Posts: 5,364
Likes: 51
From: Enschede, Netherlands
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
girdles for TW G1s?
Thread Starter
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Joined: Jun 2000
Posts: 5,364
Likes: 51
From: Enschede, Netherlands
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
155 w/ girdle? how much without?
Thread Starter
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Thread Starter
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
btt
Supreme Member
iTrader: (25)
Joined: Feb 2006
Posts: 7,260
Likes: 5
From: Manteca,California. Nor Cal.
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
These are full roller or roller tips?
Trending Topics
Senior Member
iTrader: (1)
Joined: Aug 2003
Posts: 506
Likes: 3
From: pnw near portland or.
Car: 91 RS convertible
Engine: 330 hp vortec 350. TBI
Transmission: 5 Speed
Axle/Gears: 3.73 Moiser 12 bolt/Wilwood disc's
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
Rite now I have Vortec heads with 1.55 rockers. I was told 1.6's will change it in the rite way. Do you know if it will. I'll take them if you think they'll wake my 330hp vortec up.
Thread Starter
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
remember guys. this set sells for over $300 when still in a box!
this is the PRO MAGNUM Crmoly ..full roller rockers..
short run time on them. 100% comp cams
this is the PRO MAGNUM Crmoly ..full roller rockers..
short run time on them. 100% comp cams
Supreme Member
iTrader: (25)
Joined: Feb 2006
Posts: 7,260
Likes: 5
From: Manteca,California. Nor Cal.
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
Thread Starter
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
not a good shot..only one I have this min of them.
first ill take them...
first ill take them...
Member
iTrader: (5)
Joined: Aug 2006
Posts: 311
Likes: 1
From: Stafford, Connecticut
Car: 87 Iroc
Engine: modified 350
Transmission: high performance built 700R4
Axle/Gears: Strange S60 3:73
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
Bump for an honest seller.
Joined: Jun 2000
Posts: 5,364
Likes: 51
From: Enschede, Netherlands
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
Totally forgot about this screaming deal.. I waws gonna take them and if no one has by now I will...
Member
iTrader: (5)
Joined: Aug 2006
Posts: 311
Likes: 1
From: Stafford, Connecticut
Car: 87 Iroc
Engine: modified 350
Transmission: high performance built 700R4
Axle/Gears: Strange S60 3:73
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
I bought a Fluid damper and flex plate from Jeff a couple weeks ago.They were almost new.Almost $500 worth of parts for $130.It was a great deal.
Thread Starter
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
hate to see this stuff just Sit.
Wish I could have used them My self. but more Cubes and BOOST.= Diff parts.
Jeff
Thread Starter
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
Rocker arms are SOLD!
and goodys Sold
and goodys Sold
Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 816
Likes: 0
From: Mechanicsburg, PA
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
Uhhhhhh I was waiting for a pay pal address to send money. Didnt get a reply. What gives?
Thread Starter
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Re: WTS Compcams pro magnum roller rockers 1.6/3/8stud like new $130 shipped
by the time I got this from you..
(Are they the self aligning ones? I'll take em. Send me a pay pal address.)
another buyer was in front of you saying he would take them.
this stuff sells Fast when its priced Good!!
Thread
Thread Starter
Forum
Replies
Last Post
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
Sep 2, 2015 02:45 PM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
Aug 20, 2015 09:36 PM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM
IrocZ'85
Engine/Drivetrain/Suspension Parts for Sale
0
Aug 17, 2015 06:24 PM