Tan Interior Plastics
#1
Member
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Location: Howard County, MD
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: Warmed over 350 TPI
Transmission: 700r4 soon to be t56
Tan Interior Plastics
Hello, I have a complete set of tan interior plastic panels. They are not in great shape, but have no cracks. Includes drivers side trunk cover with door, pass. side trunk cover, hatch motor cover, seat belt covers (both sides), door jam panels, and kick panels. Would like to get $200 for the complete set.
Also have a set of tan GTA door panels in really rough shape. They could be used as-is, but don't look great. Have both arm rests and also map pockets, but one got painted black (don't ask lol). Brackets not for sale. Have front seat belts in tan, but are also in rough shape. $125 for the door panels w/arm rests, make an offer on seatbelts.
There are some parts I am in need of, may go for a trade.
Local pickup only. However, I may be willing to drive 1-2 hours to meet halfway if needed.
Also have a set of tan GTA door panels in really rough shape. They could be used as-is, but don't look great. Have both arm rests and also map pockets, but one got painted black (don't ask lol). Brackets not for sale. Have front seat belts in tan, but are also in rough shape. $125 for the door panels w/arm rests, make an offer on seatbelts.
There are some parts I am in need of, may go for a trade.
Local pickup only. However, I may be willing to drive 1-2 hours to meet halfway if needed.
#2
Member
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Location: Howard County, MD
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: Warmed over 350 TPI
Transmission: 700r4 soon to be t56
Re: Tan Interior Plastics
Bump.
I have a set of really nice tan Ultima seats that I would be willing to trade for a set of black seats in equally good condition. Or for 4th gen leather (and I might pay some $$ too if they're nice).
I have a set of really nice tan Ultima seats that I would be willing to trade for a set of black seats in equally good condition. Or for 4th gen leather (and I might pay some $$ too if they're nice).
#4
Member
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Location: Howard County, MD
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: Warmed over 350 TPI
Transmission: 700r4 soon to be t56
Re: Tan Interior Plastics
bump...
There hasn't been much interest, but I need to get rid of these, so I will be separating everything
seats, in excellent condition: trade for black seats of equal condition or make an offer
hatch panels: black one has no cutout for brakelight, tan one does. both in good condition.- $50 each
sail panel/speaker covers- $50
sun visors- $50
spare tire cover: used to be tan but the paint has fallen off almost completely, could be used as a black piece or redyed - $30
There hasn't been much interest, but I need to get rid of these, so I will be separating everything
seats, in excellent condition: trade for black seats of equal condition or make an offer
hatch panels: black one has no cutout for brakelight, tan one does. both in good condition.- $50 each
sail panel/speaker covers- $50
sun visors- $50
spare tire cover: used to be tan but the paint has fallen off almost completely, could be used as a black piece or redyed - $30
Last edited by transaero; 06-05-2016 at 08:41 PM.
#5
Member
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Location: Howard County, MD
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: Warmed over 350 TPI
Transmission: 700r4 soon to be t56
Re: Tan Interior Plastics
pass. trunk panel: sun bleached, need to be dyed- $40
door panels: drivers side is starting to pull apart- $100 for the pair
rear trunk panel: has the cargo light, but not sure if it works- $40
door jam strips: some cracks on one side, one small crack on the other- SOLD
kick panels: needs new carpet- $30
radio pod + trim: pod has broken on top but has been repaired, the bottom padding/plastic is broken off- trim is in good condition, has the large opening- $25 each or $40 for both
seat belt cover panels: needs to be redyed, they are sun bleached and have some black marks on them- $40
headliner trim piece- $60
Would prefer pickup for larger items. seats are pickup only.
Rob
door panels: drivers side is starting to pull apart- $100 for the pair
rear trunk panel: has the cargo light, but not sure if it works- $40
door jam strips: some cracks on one side, one small crack on the other- SOLD
kick panels: needs new carpet- $30
radio pod + trim: pod has broken on top but has been repaired, the bottom padding/plastic is broken off- trim is in good condition, has the large opening- $25 each or $40 for both
seat belt cover panels: needs to be redyed, they are sun bleached and have some black marks on them- $40
headliner trim piece- $60
Would prefer pickup for larger items. seats are pickup only.
Rob
Last edited by transaero; 06-05-2016 at 08:40 PM.
#7
Junior Member
Join Date: May 2013
Location: Canada
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 iroc z
Engine: 350 sbc vortec from ATK
Transmission: T-5
Re: Tan Interior Plastics
Also interested in the black hatch panel trim. How much shipped to canada? Postal code is R0G 0X0
Trending Topics
#8
Member
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Location: Howard County, MD
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: Warmed over 350 TPI
Transmission: 700r4 soon to be t56
Re: Tan Interior Plastics
might have a couple of them, I know some were missing and broken, but I'll check. Shipping to Canada probably won't be cheap.
#10
Junior Member
iTrader: (1)
Join Date: Oct 2002
Location: jacksonville, fl.
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tan Interior Plastics
Hello, I have a complete set of tan interior plastic panels. They are not in great shape, but have no cracks. Includes drivers side trunk cover with door, pass. side trunk cover, hatch motor cover, seat belt covers (both sides), door jam panels, and kick panels. Would like to get $200 for the complete set.
Also have a set of tan GTA door panels in really rough shape. They could be used as-is, but don't look great. Have both arm rests and also map pockets, but one got painted black (don't ask lol). Brackets not for sale. Have front seat belts in tan, but are also in rough shape. $125 for the door panels w/arm rests, make an offer on seatbelts.
There are some parts I am in need of, may go for a trade.
Local pickup only. However, I may be willing to drive 1-2 hours to meet halfway if needed.
Also have a set of tan GTA door panels in really rough shape. They could be used as-is, but don't look great. Have both arm rests and also map pockets, but one got painted black (don't ask lol). Brackets not for sale. Have front seat belts in tan, but are also in rough shape. $125 for the door panels w/arm rests, make an offer on seatbelts.
There are some parts I am in need of, may go for a trade.
Local pickup only. However, I may be willing to drive 1-2 hours to meet halfway if needed.
#11
Member
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Location: Howard County, MD
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: Warmed over 350 TPI
Transmission: 700r4 soon to be t56
Re: Tan Interior Plastics
I will go ahead and pack it up and get a quote. Also, if I can find any of those panel screws, I will just throw them in.
PM sent.
Im interested in the sunvisors. Also, if you have the t-top headliner in tan as well in good condition im interested in that as well. PM sent.
#13
Member
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Location: Howard County, MD
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: Warmed over 350 TPI
Transmission: 700r4 soon to be t56
Re: Tan Interior Plastics
Not sure what you mean by looms, unless you mean the seatbelt covers/armrests. I don't have the screws for them.
Btw, sorry for the delay for everyone, I am finishing up with finals and will be able to pack, ship, and get quotes for everything after next week.
Thanks guys
Btw, sorry for the delay for everyone, I am finishing up with finals and will be able to pack, ship, and get quotes for everything after next week.
Thanks guys
#14
Member
Join Date: Mar 2013
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Formula
Engine: 305
Transmission: T-5
Axle/Gears: 3.45 1LE Disc LSD
Re: Tan Interior Plastics
Not sure what you mean by looms, unless you mean the seatbelt covers/armrests. I don't have the screws for them.
Btw, sorry for the delay for everyone, I am finishing up with finals and will be able to pack, ship, and get quotes for everything after next week.
Thanks guys
Btw, sorry for the delay for everyone, I am finishing up with finals and will be able to pack, ship, and get quotes for everything after next week.
Thanks guys
#15
Member
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Location: Howard County, MD
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: Warmed over 350 TPI
Transmission: 700r4 soon to be t56
Re: Tan Interior Plastics
Anything to do with the seat belts are sold, and the seat belt guides are connected to the seats, of which I am not parting out perfectly good seats. They will go with whoever buys the seats when I sell them.
#16
Member
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Location: Howard County, MD
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: Warmed over 350 TPI
Transmission: 700r4 soon to be t56
Re: Tan Interior Plastics
Bump. I'm done with school for the summer, so I should be able to get orders out more quickly. (Except for the large stuff; those'll take longer)
#19
Member
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Location: Howard County, MD
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: Warmed over 350 TPI
Transmission: 700r4 soon to be t56
Re: Tan Interior Plastics
I don't know, I'd have to find a box to fit;it would probably be around $60 shipped.
No, wasn't sure if you were still interested. I would also have to find a box to fit it. All the boxes I have are small square ones...
No, wasn't sure if you were still interested. I would also have to find a box to fit it. All the boxes I have are small square ones...
#20
Member
Thread Starter
iTrader: (6)
Join Date: Jun 2012
Location: Howard County, MD
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: Warmed over 350 TPI
Transmission: 700r4 soon to be t56
Re: Tan Interior Plastics
Bump for an old thread, trying to sell these again. I have most of these parts still.
#24
Want a title? Post!
Join Date: Dec 2009
Location: Woodstock IL.
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2006 GTO
Engine: 305 H.O. and 231 S/C'd
Transmission: 5-speed & automatic (respectfully)
Axle/Gears: 3.23 and 2.93 (respectfully)
Re: Tan Interior Plastics
Do you still have the door sills (door jam strips)? If so, please let me know with shipping to 60098. My Paypal is ready!
#26
Senior Member
iTrader: (1)
Join Date: Dec 2012
Location: Tucson, AZ
Posts: 808
Likes: 0
Received 4 Likes
on
2 Posts
Car: 88 GTA Notchback
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: don't know
Re: Tan Interior Plastics
do you have the little plastic trim piece that goes in between the armrest and door panel at the top in tan?
#38
Member
iTrader: (1)
Join Date: Dec 2016
Location: cincinnati ohio
Posts: 252
Likes: 0
Received 5 Likes
on
4 Posts
Car: 1987 Trans am GTA
Engine: 5.7 liter
Transmission: 700r4
Axle/Gears: 3.27
Re: Tan Interior Plastics
thank you transaero for the seats and spare tire cover, look a little strange in a silverado lol, they will be awesome in the GTA. thanks for all your help
#40
Junior Member
Join Date: Jul 2017
Location: Northern NJ
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Z28 Vert Special Edition
Engine: 305 TPI LB9
Transmission: Auto
Thread
Thread Starter
Forum
Replies
Last Post